PlainWorker
Employers › MS

Manufacturing · Gulfport, MS

Goldin Metals, INC.

According to OSHA enforcement records (2010–2026), Goldin Metals, INC. ranks #51,877 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 3 violations across 3 inspections.

Lower half by penalty67% serious
$5,624
OSHA penalties
3
Violations cited
3
OSHA inspections
#51,877
of 99,447 penalized employers

Goldin Metals, INC. in Gulfport, MS has been the subject of 3 OSHA workplace inspections and 3 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,624. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Goldin Metals, INC. 3 times over 1 year - more than twice a year on average. These inspections resulted in 3 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #51,877 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Swirl Woodcraft INC in Salt Lake City, UT is another manufacturing employer with 2 OSHA inspections on record and $5,625 in current penalties.

1.0
violations per inspection
66.7%
of violations were serious
#51,877
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 3 violations across 3 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Goldin Metals, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Goldin Metals, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,624 Top 48% most affordable more affordable than 52% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Goldin Metals, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.027.51318.524OSHA inspectionsViolations citedHONEYWELL INTERNATIO…, OSHA inspections: 3 · Violations cited: 10BRISTOL-MYERS SQUIBB…, OSHA inspections: 3 · Violations cited: 6GEORGE INDUSTRIES LLC, OSHA inspections: 3 · Violations cited: 17GILMAN BUILDING PROD…, OSHA inspections: 3 · Violations cited: 23HITACHI AUTOMOTIVE …, OSHA inspections: 3 · Violations cited: 6CALIFORNIA INNOVATIO…, OSHA inspections: 3 · Violations cited: 20COLORADO TIMBER RESO…, OSHA inspections: 3 · Violations cited: 21BALL METAL BEVERAGE …, OSHA inspections: 3 · Violations cited: 10COORSTEK, INC., OSHA inspections: 3 · Violations cited: 10INW LIVING ECOLOGY O…, OSHA inspections: 3 · Violations cited: 6THE STRESSCRETE GROUP, OSHA inspections: 3 · Violations cited: 14FORMOSA PLASTICS COR…, OSHA inspections: 3 · Violations cited: 3MULTIVAC, OSHA inspections: 3 · Violations cited: 9AMERICAN STANDARD BR…, OSHA inspections: 3 · Violations cited: 7KEY BELLEVILLES, INC., OSHA inspections: 3 · Violations cited: 20GULF RICE MILLING, I…, OSHA inspections: 3 · Violations cited: 12HARTUNG GLASS INDUST…, OSHA inspections: 3 · Violations cited: 6PLAS-TEC CORP., OSHA inspections: 3 · Violations cited: 8PHOENIX MILLWORK, INC., OSHA inspections: 3 · Violations cited: 23ARROW FASTENER CO., …, OSHA inspections: 3 · Violations cited: 11Goldin Metals, INC., OSHA inspections: 3 · Violations cited: 3
Goldin Metals, INC. has 3 OSHA inspections on record and 3 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Goldin Metals, INC. in the Manufacturing enforcement ledger

In Manufacturing, Goldin Metals, INC. sits at penalty rank #21,937 of 35,243 penalized establishments ($5,624 assessed).

How Goldin Metals, INC. Compares

Goldin Metals, INC.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2022-09-20

Last Inspection

2022-10-06

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$1,875

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 1.0 violations per visit. That's $1,875 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,374

Current Penalty Amount

$5,624

Penalty Reduction

40.0%

What this shows Penalties were reduced by $3,750 from the initial assessment of $9,374. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Goldin Metals, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Goldin Metals, INC. Industry Avg
Inspections 3 2.6
Violations 3 8.0
Total Penalty $5,624 $15,763
Avg Penalty per Inspection $1,875 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Goldin Metals, INC., both outside MS so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($5,624 here).

Logoplaste USA Syracuse LLC $5,624 NY Hoffmaster Group, INC. $5,623 NV Swirl Woodcraft INC $5,625 UT Brand and Oppenheimer CO., INC. $5,625 TN

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Honeywell International INC. 3 insp. Geismar, LA Bristol-Myers Squibb Company 3 insp. Devens, MA George Industries LLC 3 insp. Endicott, NY Gilman Building Products, LLC 3 insp. Dudley, GA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Logoplaste USA Syracuse LLC
Rome, NY
2 inspections $5,624
Superior Steel Door & Trim
Jamestown, NY
0 inspections $0
Hoffmaster Group, INC.
Sparks, NV
4 inspections $5,623
Swirl Woodcraft INC
Salt Lake City, UT
2 inspections $5,625
Brand and Oppenheimer CO., INC.
Elizabethton, TN
2 inspections $5,625

Compare Goldin Metals, INC. vs Logoplaste USA Syracuse LLC side-by-side →

What to do with this record

Use Goldin Metals, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Goldin Metals, INC. against Logoplaste USA Syracuse LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Goldin Metals, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Goldin Metals, INC. safe to work at? ▼
Based on OSHA records, Goldin Metals, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 3 violations across 3 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Goldin Metals, INC. have? ▼
Goldin Metals, INC. has 3 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,624.
How many OSHA inspections has Goldin Metals, INC. had? ▼
Goldin Metals, INC. has had 3 OSHA inspections, with the first recorded on 2022-09-20 and the most recent on 2022-10-06. This averages 1.0 violations per inspection.
What is the total penalty amount for Goldin Metals, INC.? ▼
Goldin Metals, INC. has been assessed $5,624 in current OSHA penalties, reduced from an initial assessment of $9,374 (a 40.0% reduction).
Does Goldin Metals, INC. have any serious or willful violations? ▼
Yes. Goldin Metals, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Goldin Metals, INC. operate in? ▼
Goldin Metals, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Goldin Metals, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Goldin Metals, INC. ranks #51,877 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Goldin Metals, INC.'s safety record compare to industry average? ▼
Goldin Metals, INC.'s total OSHA penalty of $5,624 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Swirl Woodcraft INC in Salt Lake City, UT is a similar manufacturing employer with $5,625 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.