Manufacturing · Saint Louis, MO
GMP Metal Products
According to OSHA enforcement records (2010–2026), GMP Metal Products ranks #15,632 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.
- $22,021
- OSHA penalties
- 13
- Violations cited
- 3
- OSHA inspections
- #15,632
- of 99,447 penalized employers
GMP Metal Products in Saint Louis, MO has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,021. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.
The record in one line
OSHA has inspected GMP Metal Products 3 times across a longer 8-year span, an infrequent cadence. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,632 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Tyson Foods, INC. in Saint Joseph, MO is another manufacturing employer with 4 OSHA inspections on record and $22,025 in current penalties.
- 4.3
- violations per inspection
- 69.2%
- of violations were serious
- #15,632
- of 99,447 penalized employers
Compliance score
- F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.
How GMP Metal Products compares on OSHA penalties
Total current penalty vs the Manufacturing per-employer average
- GMP Metal Products
GMP Metal Products
$22,021 in penalties
- Manufacturing avg
Manufacturing industry average (per employer)
$15,763 in penalties
What this shows GMP Metal Products runs moderately above peers (1.4x the sector average) in total OSHA penalties.
Where this penalty ranks nationally
Total current OSHA penalty vs every U.S. employer with a nonzero penalty
$22,021 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty
Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.
Source U.S. Department of Labor, OSHA enforcement extracts · 2026
Does more inspection scrutiny mean more findings?
Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is GMP Metal Products.
GMP Metal Products in the Manufacturing enforcement ledger
Among 35,243 Manufacturing employers with OSHA penalties on file, GMP Metal Products ranks #7,622 at $22,021 current penalty.
How GMP Metal Products Compares
GMP Metal Products's 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.
Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).
Enforcement detail
OSHA Inspection History
Total Inspections
3
First Inspection
2014-03-18
Last Inspection
2021-12-01
Inspection Span
8 yrs
Violations / Inspection
4.3
Avg Penalty / Inspection
$7,340
Industry Avg / Inspection
$6,093
What this shows 3 inspections over 8 years, averaging 4.3 violations per visit. That's $7,340 per inspection vs. the Manufacturing average of $6,093.
Enforcement detail
Violation Breakdown
9
Serious
69.2% of total
0
Willful
0.0% of total
2
Repeat
15.4% of total
2
Other-Than-Serious
15.4% of total
What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.
Enforcement detail
Penalty Analysis
Initial Penalty Assessed
$54,997
Current Penalty Amount
$22,021
Penalty Reduction
60.0%
What this shows Penalties were reduced by $32,976 from the initial assessment of $54,997. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.
Industry Safety Context: Manufacturing
How GMP Metal Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.
| Metric | GMP Metal Products | Industry Avg |
|---|---|---|
| Inspections | 3 | 2.6 |
| Violations | 13 | 8.0 |
| Total Penalty | $22,021 | $15,763 |
| Avg Penalty per Inspection | $7,340 | $6,093 |
Nationwide Manufacturing peers with similar penalties or inspection counts
Two OSHA-record peer sets for GMP Metal Products, both outside MO so the neighborhoods are not geographic containment.
Similar current OSHA penalty
Nearest same-sector employers by current assessed penalty ($22,021 here).
Similar OSHA inspection count
Same-sector employers with a comparable inspection history outside this state (3 inspections here).
Nearby & Similar Employers in Manufacturing
Showing 5 of 44644 other employers tracked in this sector.
Compare GMP Metal Products vs Aldora Aluminum & Glass Products, INC. side-by-side →
What to do with this record
Use GMP Metal Products's enforcement history as one data point, not the whole picture.
- A single employer's record can look unusual in isolation. Compare GMP Metal Products against Aldora Aluminum & Glass Products, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
- See whether GMP Metal Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
- Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers
Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.
Frequently Asked Questions
Is GMP Metal Products safe to work at? ▼
How many OSHA violations does GMP Metal Products have? ▼
How many OSHA inspections has GMP Metal Products had? ▼
What is the total penalty amount for GMP Metal Products? ▼
Does GMP Metal Products have any serious or willful violations? ▼
What industry does GMP Metal Products operate in? ▼
Where does GMP Metal Products rank nationally on OSHA penalties? ▼
How does GMP Metal Products's safety record compare to industry average? ▼
Data Sources & Methodology ▼
Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).
Source: OSHA Enforcement Data
Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.
Source: Wage and Hour Division (WHD)
Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.
Employer Matching
Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.