PlainWorker
Employers › MI

Manufacturing · Lansing, MI

GM Lansing Delta Township Assembly

According to OSHA enforcement records (2010–2026), GM Lansing Delta Township Assembly has a relatively clean safety record: 2 violations across 7 inspections. See the full breakdown below.

Lower half by penalty100% serious
$3,850
OSHA penalties
2
Violations cited
7
OSHA inspections
#63,169
of 100,495 penalized employers

GM Lansing Delta Township Assembly in Lansing, MI has been the subject of 7 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,850. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected GM Lansing Delta Township Assembly 7 times over 7 years, roughly annually. These inspections resulted in just 2 violations, averaging 0.3 per inspection - fewer than typical. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs well above peers (2.8x the sector average) on inspection frequency. For comparison, Michigan Automotive Compressor INC in Parma, MI is another manufacturing employer with 6 OSHA inspections on record and $3,850 in current penalties.

0.3
violations per inspection
100.0%
of violations were serious
37%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows GM Lansing Delta Township Assembly runs well below peers (0.25x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,850 Top 37% most affordable more affordable than 63% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About GM Lansing Delta Township Assembly

The federal enforcement record for GM Lansing Delta Township Assembly in Lansing, MI includes 7 OSHA inspections and 2 violations, translating to 0.29 violations per inspection. Of those violations, 2 (100.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $7,700 in initial penalties against this employer, later adjusted to a current total of $3,850 - a 50.0% reduction. Average penalty per inspection works out to $550. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.25x the sector average).

Inspection activity spans from 2016-07-28 to 2023-06-16, a window of roughly 7 years.

Enforcement detail

OSHA Inspection History

Total Inspections

7

First Inspection

2016-07-28

Last Inspection

2023-06-16

Inspection Span

7 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$550

Industry Avg / Inspection

$6,092

What this shows 7 inspections over 7 years, averaging 0.3 violations per visit. That's $550 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,700

Current Penalty Amount

$3,850

Penalty Reduction

50.0%

What this shows Penalties were reduced by $3,850 from the initial assessment of $7,700. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How GM Lansing Delta Township Assembly compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric GM Lansing Delta Township Assembly Industry Avg
Inspections 7 2.5
Violations 2 7.8
Total Penalty $3,850 $15,410
Avg Penalty per Inspection $550 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Deeter Foundry INC
Lincoln, NE
3 inspections $3,850
Sonoco Products Company
Murfreesboro, TN
2 inspections $3,850
Hellebusch Tool & Die, INC.
Washington, MO
3 inspections $3,850
Michigan Automotive Compressor INC
Parma, MI
6 inspections $3,850
CWC Textron
Muskegon, MI
3 inspections $3,850

Compare GM Lansing Delta Township Assembly vs Deeter Foundry INC side-by-side →

Frequently Asked Questions

Is GM Lansing Delta Township Assembly safe to work at? ▼
Based on OSHA records, GM Lansing Delta Township Assembly's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 7 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does GM Lansing Delta Township Assembly have? ▼
GM Lansing Delta Township Assembly has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,850.
How many OSHA inspections has GM Lansing Delta Township Assembly had? ▼
GM Lansing Delta Township Assembly has had 7 OSHA inspections, with the first recorded on 2016-07-28 and the most recent on 2023-06-16. This averages 0.3 violations per inspection.
What is the total penalty amount for GM Lansing Delta Township Assembly? ▼
GM Lansing Delta Township Assembly has been assessed $3,850 in current OSHA penalties, reduced from an initial assessment of $7,700 (a 50.0% reduction).
Does GM Lansing Delta Township Assembly have any serious or willful violations? ▼
Yes. GM Lansing Delta Township Assembly has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does GM Lansing Delta Township Assembly operate in? ▼
GM Lansing Delta Township Assembly operates in the Manufacturing sector (NAICS code 336111). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does GM Lansing Delta Township Assembly's safety record compare to industry average? ▼
GM Lansing Delta Township Assembly's total OSHA penalty of $3,850 is below the Manufacturing industry average of $15,410 per employer. The employer has 7 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Michigan Automotive Compressor INC in Parma, MI is a similar manufacturing employer with $3,850 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MI

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

GM Lansing Delta Township Assembly's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 7 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.