PlainWorker
Employers › OR

Manufacturing · Canby, OR

Global Stainless Systems INC

According to OSHA enforcement records (2010–2026), Global Stainless Systems INC has a concerning safety record: 18 violations across 4 inspections. See the full breakdown below.

Lower half by penalty67% serious
$645
OSHA penalties
18
Violations cited
4
OSHA inspections
#91,699
of 100,495 penalized employers

Global Stainless Systems INC in Canby, OR has been the subject of 4 OSHA workplace inspections and 18 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $645. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Global Stainless Systems INC 4 times over 3 years, roughly annually. These inspections resulted in 18 violations, averaging 4.5 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the lower half of penalized employers nationally. Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.6x the sector average) on inspection frequency. For comparison, The Woodshed Custom Cabinets, INC. in Clinton, NC is another manufacturing employer with 2 OSHA inspections on record and $650 in current penalties.

4.5
violations per inspection
66.7%
of violations were serious
9%
of penalized employers rank lower

How Global Stainless Systems INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Global Stainless Systems INC runs well below peers (0.04x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$645 Top 9% most affordable more affordable than 91% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Above this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Global Stainless Systems INC

The federal enforcement record for Global Stainless Systems INC in Canby, OR includes 4 OSHA inspections and 18 violations, translating to 4.50 violations per inspection. Of those violations, 12 (66.7%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $645 in initial penalties against this employer, later adjusted to a current total of $645 - no reduction from the original assessment. Average penalty per inspection works out to $161. Against the Manufacturing industry average of $15,410 per employer, this record runs well below peers (0.04x the sector average).

Inspection activity spans from 2011-11-17 to 2014-07-16, a window of roughly 3 years.

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2011-11-17

Last Inspection

2014-07-16

Inspection Span

3 yrs

Violations / Inspection

4.5

Avg Penalty / Inspection

$161

Industry Avg / Inspection

$6,092

What this shows 4 inspections over 3 years, averaging 4.5 violations per visit. That's $161 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

12

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$645

Current Penalty Amount

$645

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Global Stainless Systems INC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Global Stainless Systems INC Industry Avg
Inspections 4 2.5
Violations 18 7.8
Total Penalty $645 $15,410
Avg Penalty per Inspection $161 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Kaiser Aluminum
Commerce, CA
2 inspections $645
Rizzo PKG INC
Plainwell, MI
2 inspections $645
Paul Precision Machine INC.
Tulsa, OK
2 inspections $648
Zina's Salads, INC.
East Hanover, NJ
2 inspections $650
The Woodshed Custom Cabinets, INC.
Clinton, NC
2 inspections $650

Compare Global Stainless Systems INC vs Kaiser Aluminum side-by-side →

Frequently Asked Questions

Is Global Stainless Systems INC safe to work at? ▼
Based on OSHA records, Global Stainless Systems INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 18 violations across 4 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Global Stainless Systems INC have? ▼
Global Stainless Systems INC has 18 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $645.
How many OSHA inspections has Global Stainless Systems INC had? ▼
Global Stainless Systems INC has had 4 OSHA inspections, with the first recorded on 2011-11-17 and the most recent on 2014-07-16. This averages 4.5 violations per inspection.
What is the total penalty amount for Global Stainless Systems INC? ▼
Global Stainless Systems INC has been assessed $645 in current OSHA penalties.
Does Global Stainless Systems INC have any serious or willful violations? ▼
Yes. Global Stainless Systems INC has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Global Stainless Systems INC operate in? ▼
Global Stainless Systems INC operates in the Manufacturing sector (NAICS code 333294). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Global Stainless Systems INC's safety record compare to industry average? ▼
Global Stainless Systems INC's total OSHA penalty of $645 is below the Manufacturing industry average of $15,410 per employer. The employer has 4 inspections compared to the industry average of 2.5 per employer. For a direct comparison, The Woodshed Custom Cabinets, INC. in Clinton, NC is a similar manufacturing employer with $650 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in OR

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Global Stainless Systems INC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.