PlainWorker
Employers › OH

Manufacturing · East Liberty, OH

Global Precision Parts, INC.

According to OSHA enforcement records (2010–2026), Global Precision Parts, INC. ranks #12,700 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 2 inspections.

Top 25% by penalty67% serious
$26,062
OSHA penalties
12
Violations cited
2
OSHA inspections
#12,700
of 99,447 penalized employers

Global Precision Parts, INC. in East Liberty, OH has been the subject of 2 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $26,062. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Global Precision Parts, INC. 2 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 12 violations, averaging 6.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #12,700 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 8 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Microflex, INC. in Ormond Beach, FL is another manufacturing employer with 4 OSHA inspections on record and $26,056 in current penalties.

6.0
violations per inspection
66.7%
of violations were serious
#12,700
of 99,447 penalized employers

Compliance score

F 3/100
  • F OSHA safety compliance: 12 violations across 2 OSHA inspections (6.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Global Precision Parts, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Global Precision Parts, INC. runs moderately above peers (1.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$26,062 Bottom 13% least affordable more affordable than 13% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Global Precision Parts, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0013.927.841.755.6OSHA inspectionsViolations citedPRESTIGE INDUSTRIES,…, OSHA inspections: 2 · Violations cited: 11FOX VALLEY SYSTEMS, …, OSHA inspections: 2 · Violations cited: 48AMERICAN MARAZZI TIL…, OSHA inspections: 2 · Violations cited: 44HBD/THERMOID, INC., OSHA inspections: 2 · Violations cited: 53PALLFLEX COMPANY, OSHA inspections: 2 · Violations cited: 40NITTA CASINGS, INC., OSHA inspections: 2 · Violations cited: 21PALOS VERDES BLDG. C…, OSHA inspections: 2 · Violations cited: 12EDGEWELL PERSONAL CA…, OSHA inspections: 2 · Violations cited: 1THE QUIKRETE COMPANI…, OSHA inspections: 2 · Violations cited: 4SGFW BAKERS INC, OSHA inspections: 2 · Violations cited: 5D & G PALLET SERVICE…, OSHA inspections: 2 · Violations cited: 8SMITH FILTER CORPORA…, OSHA inspections: 2 · Violations cited: 7TAYLOR-LISTUG, INC., OSHA inspections: 2 · Violations cited: 17DOUGLAS PRESS, INC., OSHA inspections: 2 · Violations cited: 9CHURCH CHAIRS OF AME…, OSHA inspections: 2 · Violations cited: 6BROOKLYN BOTTLING CO…, OSHA inspections: 2 · Violations cited: 24LINDEN LUMBER COMPANY, OSHA inspections: 2 · Violations cited: 12EASON PORTABLE BUILD…, OSHA inspections: 2 · Violations cited: 12CST PRODUCTS LLC., OSHA inspections: 2 · Violations cited: 32LAKESIDE FOODS INC., OSHA inspections: 2 · Violations cited: 4Global Precision Par…, OSHA inspections: 2 · Violations cited: 12
Global Precision Parts, INC. has 2 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Global Precision Parts, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Global Precision Parts, INC. is the #6,238 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($26,062).

How Global Precision Parts, INC. Compares

Global Precision Parts, INC.'s 6.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-11-12

Last Inspection

2023-03-07

Inspection Span

9 yrs

Violations / Inspection

6.0

Avg Penalty / Inspection

$13,031

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 9 years, averaging 6.0 violations per visit. That's $13,031 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

8

Serious

66.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

33.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$92,235

Current Penalty Amount

$26,062

Penalty Reduction

71.7%

What this shows Penalties were reduced by $66,173 from the initial assessment of $92,235. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Global Precision Parts, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Global Precision Parts, INC. Industry Avg
Inspections 2 2.6
Violations 12 8.0
Total Penalty $26,062 $15,763
Avg Penalty per Inspection $13,031 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Global Precision Parts, INC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($26,062 here).

Saand US LLC $26,060 MA Newman Technology South Carolina INC $26,065 SC Microflex, INC. $26,056 FL Fabri-Kal Corporation $26,071 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Prestige Industries, LLC 2 insp. Paterson, NJ Fox Valley Systems, INC. 2 insp. Cary, IL American Marazzi Tile, INC. 2 insp. Sunnyvale, TX HBD/Thermoid, INC. 2 insp. Salisbury, NC

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Saand US LLC
Webster, MA
2 inspections $26,060
Newman Technology South Carolina INC
Aiken, SC
3 inspections $26,065
Microflex, INC.
Ormond Beach, FL
4 inspections $26,056
Fabri-Kal Corporation
West Hazleton, PA
4 inspections $26,071
Industrial Metal Fabrication, INC.
Newton, KS
4 inspections $26,074

Compare Global Precision Parts, INC. vs Saand US LLC side-by-side →

What to do with this record

Use Global Precision Parts, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Global Precision Parts, INC. against Saand US LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Global Precision Parts, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Global Precision Parts, INC. safe to work at? ▼
Based on OSHA records, Global Precision Parts, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 2 inspections, including 8 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Global Precision Parts, INC. have? ▼
Global Precision Parts, INC. has 12 OSHA violations on record, including 8 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $26,062.
How many OSHA inspections has Global Precision Parts, INC. had? ▼
Global Precision Parts, INC. has had 2 OSHA inspections, with the first recorded on 2013-11-12 and the most recent on 2023-03-07. This averages 6.0 violations per inspection.
What is the total penalty amount for Global Precision Parts, INC.? ▼
Global Precision Parts, INC. has been assessed $26,062 in current OSHA penalties, reduced from an initial assessment of $92,235 (a 71.7% reduction).
Does Global Precision Parts, INC. have any serious or willful violations? ▼
Yes. Global Precision Parts, INC. has 8 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Global Precision Parts, INC. operate in? ▼
Global Precision Parts, INC. operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Global Precision Parts, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Global Precision Parts, INC. ranks #12,700 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Global Precision Parts, INC.'s safety record compare to industry average? ▼
Global Precision Parts, INC.'s total OSHA penalty of $26,062 is above the Manufacturing industry average of $15,763 per employer (1.7x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Microflex, INC. in Ormond Beach, FL is a similar manufacturing employer with $26,056 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.