Manufacturing · Elgin, IL

Gerali Custom Design, INC.

According to OSHA enforcement records (2010–2026), Gerali Custom Design, INC. ranks #15,283 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 13 violations across 3 inspections.

Top 25% by penalty54% serious
$22,496
OSHA penalties
13
Violations cited
3
OSHA inspections
#15,283
of 99,447 penalized employers

Gerali Custom Design, INC. in Elgin, IL has been the subject of 3 OSHA workplace inspections and 13 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,496. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Gerali Custom Design, INC. 3 times over 2 years, roughly annually. These inspections resulted in 13 violations, averaging 4.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,283 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, McCain Foods USA, INC. in Grand Island, NE is another manufacturing employer with 3 OSHA inspections on record and $22,500 in current penalties.

4.3
violations per inspection
53.8%
of violations were serious
#15,283
of 99,447 penalized employers

Compliance score

F 27/100
  • F OSHA safety compliance: 13 violations across 3 OSHA inspections (4.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Gerali Custom Design, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Gerali Custom Design, INC. runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,496 Bottom 15% least affordable more affordable than 15% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Gerali Custom Design, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.88.615.522.429.3OSHA inspectionsViolations citedPASTA MONTANA, LLC, OSHA inspections: 3 · Violations cited: 6INTERNATIONAL CONVER…, OSHA inspections: 3 · Violations cited: 13CALCASIEU REFINING C…, OSHA inspections: 3 · Violations cited: 14NASHVILLE WIRE PRODU…, OSHA inspections: 3 · Violations cited: 4HALL MANUFACTURING, …, OSHA inspections: 3 · Violations cited: 28BEST MAID COOKIE COM…, OSHA inspections: 3 · Violations cited: 13HIGHLINE WARREN, LLC, OSHA inspections: 3 · Violations cited: 16KEPHACO CORPORATION, OSHA inspections: 3 · Violations cited: 28DAP GLOBAL INC., OSHA inspections: 3 · Violations cited: 11VALLEY CO-OP OIL MILL, OSHA inspections: 3 · Violations cited: 12TUUCI, LLC, OSHA inspections: 3 · Violations cited: 9SHURE MANUFACTURING …, OSHA inspections: 3 · Violations cited: 14WIELAND CHASE LLC, OSHA inspections: 3 · Violations cited: 9RODEO PLASTIC BAG & …, OSHA inspections: 3 · Violations cited: 6ROYAL CUSTOM DESIGNS…, OSHA inspections: 3 · Violations cited: 6FRANCES TODD INC. DB…, OSHA inspections: 3 · Violations cited: 25LEMASTER GROUP, LLC, OSHA inspections: 3 · Violations cited: 15ELLWOOD TEXAS FORGE,…, OSHA inspections: 3 · Violations cited: 3WARWICK MACHINE & TO…, OSHA inspections: 3 · Violations cited: 10LONGVIEW FIBRE PAPER…, OSHA inspections: 3 · Violations cited: 7Gerali Custom Design…, OSHA inspections: 3 · Violations cited: 13
Gerali Custom Design, INC. has 3 OSHA inspections on record and 13 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Gerali Custom Design, INC. in the Manufacturing enforcement ledger

In Manufacturing, Gerali Custom Design, INC. sits at penalty rank #7,455 of 35,243 penalized establishments ($22,496 assessed).

How Gerali Custom Design, INC. Compares

Gerali Custom Design, INC.'s 4.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-01-05

Last Inspection

2013-05-08

Inspection Span

2 yrs

Violations / Inspection

4.3

Avg Penalty / Inspection

$7,499

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 2 years, averaging 4.3 violations per visit. That's $7,499 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

53.8% of total

0

Willful

0.0% of total

1

Repeat

7.7% of total

5

Other-Than-Serious

38.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$31,229

Current Penalty Amount

$22,496

Penalty Reduction

28.0%

What this shows Penalties were reduced by $8,733 from the initial assessment of $31,229. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Gerali Custom Design, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Gerali Custom Design, INC. Industry Avg
Inspections 3 2.6
Violations 13 8.0
Total Penalty $22,496 $15,763
Avg Penalty per Inspection $7,499 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Gerali Custom Design, INC., both outside IL so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Gerali Custom Design, INC. vs Taylor Manufacturing Company, INC side-by-side →

What to do with this record

Use Gerali Custom Design, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Gerali Custom Design, INC. against Taylor Manufacturing Company, INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Gerali Custom Design, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Gerali Custom Design, INC. safe to work at?
Based on OSHA records, Gerali Custom Design, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 13 violations across 3 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Gerali Custom Design, INC. have?
Gerali Custom Design, INC. has 13 OSHA violations on record, including 7 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $22,496.
How many OSHA inspections has Gerali Custom Design, INC. had?
Gerali Custom Design, INC. has had 3 OSHA inspections, with the first recorded on 2011-01-05 and the most recent on 2013-05-08. This averages 4.3 violations per inspection.
What is the total penalty amount for Gerali Custom Design, INC.?
Gerali Custom Design, INC. has been assessed $22,496 in current OSHA penalties, reduced from an initial assessment of $31,229 (a 28.0% reduction).
Does Gerali Custom Design, INC. have any serious or willful violations?
Yes. Gerali Custom Design, INC. has 7 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Gerali Custom Design, INC. operate in?
Gerali Custom Design, INC. operates in the Manufacturing sector (NAICS code 327991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Gerali Custom Design, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Gerali Custom Design, INC. ranks #15,283 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Gerali Custom Design, INC.'s safety record compare to industry average?
Gerali Custom Design, INC.'s total OSHA penalty of $22,496 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, McCain Foods USA, INC. in Grand Island, NE is a similar manufacturing employer with $22,500 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.