Retail Trade · QUINCY, IL

GEO. KELLER & SONS CO.

OSHA records show a concerning safety record: 19 violations across 4 inspections — above the Retail Trade industry average for penalties.

Reviewed byPlainworker Editorial, Workplace Safety Editorial Team · June 7, 2026

4
OSHA inspections: 19
Violations cited: $11,205
OSHA penalties

GEO. KELLER & SONS CO. in QUINCY, IL has been the subject of 4 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,205. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

GEO. KELLER & SONS CO. has been inspected 4 times by OSHA over 3 years. These inspections resulted in 19 violations, averaging 4.8 violations per inspection. Of these, 10 were classified as serious — indicating hazards that could cause death or serious harm. Compared to the Retail Trade industry average of 1 inspections per employer, GEO. KELLER & SONS CO. has been inspected more frequently.

4.8
violations per inspection: 52.6%
of violations were serious: 5.2×
Retail Trade industry-avg penalty

GEO. KELLER & SONS CO.

$11,205
Retail Trade avg

$2,155

What this shows GEO. KELLER & SONS CO. carries 5.2× the penalties of a typical Retail Trade employer — a clear outlier in its sector.

What the Data Says About GEO. KELLER & SONS CO.

The federal enforcement record for GEO. KELLER & SONS CO. in QUINCY, IL includes 4 OSHA inspections and 19 violations, translating to 4.75 violations per inspection. Of those violations, 10 (52.6%) were classified as serious, 0 (0.0%) as willful, and 2 (10.5%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $19,550 in initial penalties against this employer, later adjusted to a current total of $11,205 — a 42.7% reduction. Average penalty per inspection works out to $2,801. Against the Retail Trade industry average of $2,155 per employer, this record runs above peers.

Inspection activity spans from 2010-09-14 to 2013-11-01, a window of roughly 3 years. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections

First Inspection

2010-09-14

Last Inspection

2013-11-01

Inspection Span

3 years

Violations per Inspection

4.8

Avg Penalty per Inspection

$2,801

Industry Avg per Inspection

$3,118

Violation Breakdown

Serious

52.6% of total

Willful

0.0% of total

Repeat

10.5% of total

Other-Than-Serious

36.8% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed

$19,550

Current Penalty Amount

$11,205

Penalty Reduction

42.7%

Penalties were reduced by $8,345 from the initial assessment of $19,550. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Retail Trade

How GEO. KELLER & SONS CO. compares to the Retail Trade sector, which has 10,365 employers tracked by PlainWorker.

Metric	GEO. KELLER & SONS CO.	Industry Avg
Inspections	4	0.7
Violations	19	1.5
Total Penalty	$11,205	$2,155
Avg Penalty per Inspection	$2,801	$3,118

View all 10,365 employers in Retail Trade →

Explore related data

Retail Trade safety record →

Inspections, violations, and penalties across the Retail Trade sector.

IL enforcement →

Top violators and statewide OSHA & WHD totals for IL.

Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process

How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes

Your Rights Under OSHA

Know your workplace safety rights and how to exercise them

Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages

Most Dangerous Industries

Which industries face the highest rates of violations and penalties

Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Retail Trade

KROGER

CINCINNATI, OH

1 inspections $7,000

Allsups Convenience Stores

Compare GEO. KELLER & SONS CO. vs KROGER side-by-side →

Frequently Asked Questions

Is GEO. KELLER & SONS CO. safe to work at? ▼

Based on OSHA records, GEO. KELLER & SONS CO.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 4 inspections, including 10 serious violations. Compared to Retail Trade industry peers, this is above average for penalties. Review the full inspection history below for details.

How many OSHA violations does GEO. KELLER & SONS CO. have? ▼

GEO. KELLER & SONS CO. has 19 OSHA violations on record, including 10 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $11,205.

How many OSHA inspections has GEO. KELLER & SONS CO. had? ▼

GEO. KELLER & SONS CO. has had 4 OSHA inspections, with the first recorded on 2010-09-14 and the most recent on 2013-11-01. This averages 4.8 violations per inspection.

What is the total penalty amount for GEO. KELLER & SONS CO.? ▼

GEO. KELLER & SONS CO. has been assessed $11,205 in current OSHA penalties, reduced from an initial assessment of $19,550 (a 42.7% reduction).

Does GEO. KELLER & SONS CO. have any serious or willful violations? ▼

Yes. GEO. KELLER & SONS CO. has 10 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.

What industry does GEO. KELLER & SONS CO. operate in? ▼

GEO. KELLER & SONS CO. operates in the Retail Trade sector (NAICS code 444220). This industry has 10,365 employers tracked by PlainWorker, with 7,162 total OSHA inspections and $22.33M in cumulative penalties.

What are my rights if I work at GEO. KELLER & SONS CO.? ▼

Under the Occupational Safety and Health Act, employees at GEO. KELLER & SONS CO. have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.

How do I file an OSHA complaint against GEO. KELLER & SONS CO.? ▼

You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.

How does GEO. KELLER & SONS CO.'s safety record compare to industry average? ▼

GEO. KELLER & SONS CO.'s total OSHA penalty of $11,205 is above the Retail Trade industry average of $2,155 per employer (5.2x the average). The employer has 4 inspections compared to the industry average of 0.7 per employer.

Explore PlainWorker

Retail Trade Industry

All 10,365 employers in this sector

Employers in IL

All inspected employers in this state

Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.