Construction · Harper Woods, MI

G & G Steel Fabricating CO

According to OSHA enforcement records (2010–2026), G & G Steel Fabricating CO ranks #31,541 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 24 violations across 2 inspections.

Upper half by penalty96% serious
$11,340
OSHA penalties
24
Violations cited
2
OSHA inspections
#31,541
of 99,447 penalized employers

G & G Steel Fabricating CO in Harper Woods, MI has been the subject of 2 OSHA workplace inspections and 24 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,340. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected G & G Steel Fabricating CO 2 times over 1 year - more than twice a year on average. These inspections turned up 24 violations, averaging 12.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #31,541 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 23 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Budget Heating, Cooling & Plumbing in Saint Peters, MO is another construction employer with 0 OSHA inspections on record and $0 in current penalties.

12.0
violations per inspection
95.8%
of violations were serious
#31,541
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 24 violations across 2 OSHA inspections (12.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How G & G Steel Fabricating CO compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows G & G Steel Fabricating CO runs moderately above peers (1.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,340 Bottom 32% least affordable more affordable than 32% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is G & G Steel Fabricating CO.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.97.013.019.125.1OSHA inspectionsViolations citedDOMINGOS 54 CONSTRUC…, OSHA inspections: 2 · Violations cited: 4HOPEWELL TOWNSHIP PU…, OSHA inspections: 2 · Violations cited: 14J. K. CARPENTRY & CO…, OSHA inspections: 2 · Violations cited: 13HIGHPOINT CONSTRUCTION, OSHA inspections: 2 · Violations cited: 2RAPTOR EXTERIORS, INC., OSHA inspections: 2 · Violations cited: 8MIK FRAMING, LLC., OSHA inspections: 2 · Violations cited: 7S G STUCCO, OSHA inspections: 2 · Violations cited: 9PILITA CONSTRUCTION …, OSHA inspections: 2 · Violations cited: 16UNITED ROOFING SERVI…, OSHA inspections: 2 · Violations cited: 3MAJESTIC BUILDERS NJ…, OSHA inspections: 2 · Violations cited: 10U.S. STRUCTURES, INC., OSHA inspections: 2 · Violations cited: 7L STYLE CARPENTRY LLC, OSHA inspections: 2 · Violations cited: 2HIGHMARK CONSTRUCTION, OSHA inspections: 2 · Violations cited: 7SHAYCORE ENTERPRISES…, OSHA inspections: 2 · Violations cited: 5VINEYARD CUSTOM MASO…, OSHA inspections: 2 · Violations cited: 6MARTINEZ BROTHERS CO…, OSHA inspections: 2 · Violations cited: 5ADVANCED CONSTRUCTIO…, OSHA inspections: 2 · Violations cited: 18ESPINOZA ROOFING, OSHA inspections: 2 · Violations cited: 5S.B. COX INC, OSHA inspections: 2 · Violations cited: 12MUNOZ FRAMING LLC, OSHA inspections: 2 · Violations cited: 7G & G Steel Fabricat…, OSHA inspections: 2 · Violations cited: 24
G & G Steel Fabricating CO has 2 OSHA inspections on record and 24 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

G & G Steel Fabricating CO in the Construction enforcement ledger

In Construction, G & G Steel Fabricating CO sits at penalty rank #8,538 of 33,222 penalized establishments ($11,340 assessed).

How G & G Steel Fabricating CO Compares

G & G Steel Fabricating CO's 12.00 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs moderately above peers (1.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-06-22

Last Inspection

2016-06-22

Inspection Span

1 yr

Violations / Inspection

12.0

Avg Penalty / Inspection

$5,670

Industry Avg / Inspection

$3,361

What this shows 2 inspections over 1 year, averaging 12.0 violations per visit. That's $5,670 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

23

Serious

95.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

4.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$14,500

Current Penalty Amount

$11,340

Penalty Reduction

21.8%

What this shows Penalties were reduced by $3,160 from the initial assessment of $14,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Construction

How G & G Steel Fabricating CO compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric G & G Steel Fabricating CO Industry Avg
Inspections 2 2.0
Violations 24 3.3
Total Penalty $11,340 $6,767
Avg Penalty per Inspection $5,670 $3,361

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for G & G Steel Fabricating CO, both outside MI so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Compare G & G Steel Fabricating CO vs Professional Plumbing CORP. side-by-side →

What to do with this record

Use G & G Steel Fabricating CO's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare G & G Steel Fabricating CO against Professional Plumbing CORP., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether G & G Steel Fabricating CO's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is G & G Steel Fabricating CO safe to work at?
Based on OSHA records, G & G Steel Fabricating CO's workplace safety record is concerning, with multiple serious compliance issues. The employer has 24 violations across 2 inspections, including 23 serious violations. Compared to Construction industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does G & G Steel Fabricating CO have?
G & G Steel Fabricating CO has 24 OSHA violations on record, including 23 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,340.
How many OSHA inspections has G & G Steel Fabricating CO had?
G & G Steel Fabricating CO has had 2 OSHA inspections, with the first recorded on 2016-06-22 and the most recent on 2016-06-22. This averages 12.0 violations per inspection.
What is the total penalty amount for G & G Steel Fabricating CO?
G & G Steel Fabricating CO has been assessed $11,340 in current OSHA penalties, reduced from an initial assessment of $14,500 (a 21.8% reduction).
Does G & G Steel Fabricating CO have any serious or willful violations?
Yes. G & G Steel Fabricating CO has 23 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does G & G Steel Fabricating CO operate in?
G & G Steel Fabricating CO operates in the Construction sector (NAICS code 238120). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does G & G Steel Fabricating CO rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, G & G Steel Fabricating CO ranks #31,541 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does G & G Steel Fabricating CO's safety record compare to industry average?
G & G Steel Fabricating CO's total OSHA penalty of $11,340 is above the Construction industry average of $6,767 per employer (1.7x the average). The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Budget Heating, Cooling & Plumbing in Saint Peters, MO is a similar construction employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.