PlainWorker
Employers › CA

Manufacturing · Rancho Dominguez, CA

FS Precision Tech LLC

According to OSHA enforcement records (2010–2026), FS Precision Tech LLC ranks #22,536 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 3 inspections.

Top 25% by penalty25% serious
$15,975
OSHA penalties
20
Violations cited
3
OSHA inspections
#22,536
of 99,447 penalized employers

FS Precision Tech LLC in Rancho Dominguez, CA has been the subject of 3 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $15,975. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected FS Precision Tech LLC 3 times over 5 years, roughly once every couple of years. These inspections resulted in 20 violations, averaging 6.7 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #22,536 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Ellis Battery Specialists in Ozark, MO is another manufacturing employer with 2 OSHA inspections on record and $15,971 in current penalties.

6.7
violations per inspection
25.0%
of violations were serious
#22,536
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 20 violations across 3 OSHA inspections (6.7 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How FS Precision Tech LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows FS Precision Tech LLC sits roughly in line with peers (1.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$15,975 Bottom 23% least affordable more affordable than 23% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is FS Precision Tech LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.111.321.531.741.9OSHA inspectionsViolations citedUNIVERSAL PURE COLD STORAGE, LLC, OSHA inspections: 3 · Violations cited: 8SEMINOLE PRECAST MANUFACTURING, INC., OSHA inspections: 3 · Violations cited: 15ND PAPER INC., OSHA inspections: 3 · Violations cited: 5DELTA OIL MILL, OSHA inspections: 3 · Violations cited: 40INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC., OSHA inspections: 3 · Violations cited: 13BAUER COMPRESSORS INC, OSHA inspections: 3 · Violations cited: 5BIMBO BAKERIES USA, INC., OSHA inspections: 3 · Violations cited: 10PERKINS & MARIE CALLENDER'S INC., OSHA inspections: 3 · Violations cited: 11ADMP, LLC, OSHA inspections: 3 · Violations cited: 15KNAUF INSULATION, INC, OSHA inspections: 3 · Violations cited: 6BAE INDUSTRIES INC, OSHA inspections: 3 · Violations cited: 19GOOD OLD DAYS FOODS, INC., OSHA inspections: 3 · Violations cited: 22SUPERIOR ROLL FORMING CO., INC., OSHA inspections: 3 · Violations cited: 5IDAHO TIMBER OF BOISE, LLC, OSHA inspections: 3 · Violations cited: 13BAKERY FEEDS, OSHA inspections: 3 · Violations cited: 3AEROLITE LLC, OSHA inspections: 3 · Violations cited: 6CUSTOM POLY BAG, INC., OSHA inspections: 3 · Violations cited: 6INTEGRATED ILLUMINATION SYSTEMS, INC., OSHA inspections: 3 · Violations cited: 10TULIP MOLDED PLASTICS CORPORATION, OSHA inspections: 3 · Violations cited: 7OLIN WINCHESTER, LLC, OSHA inspections: 3 · Violations cited: 3FS Precision Tech LLC, OSHA inspections: 3 · Violations cited: 20
FS Precision Tech LLC has 3 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

FS Precision Tech LLC in the Manufacturing enforcement ledger

Manufacturing sector: FS Precision Tech LLC is the #10,712 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($15,975).

How FS Precision Tech LLC Compares

FS Precision Tech LLC's 6.67 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-02-04

Last Inspection

2014-09-18

Inspection Span

5 yrs

Violations / Inspection

6.7

Avg Penalty / Inspection

$5,325

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 5 years, averaging 6.7 violations per visit. That's $5,325 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

25.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

15

Other-Than-Serious

75.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$42,705

Current Penalty Amount

$15,975

Penalty Reduction

62.6%

What this shows Penalties were reduced by $26,730 from the initial assessment of $42,705. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How FS Precision Tech LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric FS Precision Tech LLC Industry Avg
Inspections 3 2.6
Violations 20 8.0
Total Penalty $15,975 $15,763
Avg Penalty per Inspection $5,325 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for FS Precision Tech LLC, both outside CA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($15,975 here).

The Toro Company $15,978 WI Ellis Battery Specialists $15,971 MO Southern Components, INC. $15,980 LA Ihi Ionbond INC $15,980 MI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Universal Pure Cold Storage, LLC 3 insp. Lincoln, NE Seminole Precast Manufacturing, INC. 3 insp. Macon, GA ND Paper INC. 3 insp. Wisconsin Rapids, WI Delta Oil Mill 3 insp. Greenwood, MS

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

The Toro Company
Plymouth, WI
3 inspections $15,978
Ellis Battery Specialists
Ozark, MO
2 inspections $15,971
Justfoodfordogs, LLC
Irvine, CA
2 inspections $15,980
Southern Components, INC.
Shreveport, LA
3 inspections $15,980
Ihi Ionbond INC
Madison Heights, MI
3 inspections $15,980

Compare FS Precision Tech LLC vs The Toro Company side-by-side →

What to do with this record

Use FS Precision Tech LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare FS Precision Tech LLC against The Toro Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether FS Precision Tech LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is FS Precision Tech LLC safe to work at? ▼
Based on OSHA records, FS Precision Tech LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 3 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does FS Precision Tech LLC have? ▼
FS Precision Tech LLC has 20 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $15,975.
How many OSHA inspections has FS Precision Tech LLC had? ▼
FS Precision Tech LLC has had 3 OSHA inspections, with the first recorded on 2010-02-04 and the most recent on 2014-09-18. This averages 6.7 violations per inspection.
What is the total penalty amount for FS Precision Tech LLC? ▼
FS Precision Tech LLC has been assessed $15,975 in current OSHA penalties, reduced from an initial assessment of $42,705 (a 62.6% reduction).
Does FS Precision Tech LLC have any serious or willful violations? ▼
Yes. FS Precision Tech LLC has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does FS Precision Tech LLC operate in? ▼
FS Precision Tech LLC operates in the Manufacturing sector (NAICS code 331528). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does FS Precision Tech LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, FS Precision Tech LLC ranks #22,536 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does FS Precision Tech LLC's safety record compare to industry average? ▼
FS Precision Tech LLC's total OSHA penalty of $15,975 is above the Manufacturing industry average of $15,763 per employer (1.0x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Ellis Battery Specialists in Ozark, MO is a similar manufacturing employer with $15,971 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.