PlainWorker
Employers › PA

Manufacturing · Franklin, PA

Franklin Bronze Precision Components, LLC

According to OSHA enforcement records (2010–2026), Franklin Bronze Precision Components, LLC ranks #41,650 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Upper half by penalty100% serious
$8,000
OSHA penalties
2
Violations cited
2
OSHA inspections
#41,650
of 99,447 penalized employers

Franklin Bronze Precision Components, LLC in Franklin, PA has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Franklin Bronze Precision Components, LLC 2 times over 2 years, roughly annually. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #41,650 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Montana Metal Products LLC in Des Plaines, IL is another manufacturing employer with 2 OSHA inspections on record and $8,000 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
#41,650
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Franklin Bronze Precision Components, LLC runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,000 Bottom 42% least affordable more affordable than 42% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Franklin Bronze Precision Components, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.49.017.526.034.5OSHA inspectionsViolations citedSOUTHERN TIRE MART, …, OSHA inspections: 2 · Violations cited: 21RUST-OLEUM CORPORATION, OSHA inspections: 2 · Violations cited: 11RICH PRODUCTS CORPOR…, OSHA inspections: 2 · Violations cited: 13MONTI, INC., OSHA inspections: 2 · Violations cited: 9OLDCASTLE APG SOUTH,…, OSHA inspections: 2 · Violations cited: 5SACRAMENTO COCA COLA…, OSHA inspections: 2 · Violations cited: 9AMES TRUE TEMPER, INC, OSHA inspections: 2 · Violations cited: 7CAPSTAN MANAGEMENT, …, OSHA inspections: 2 · Violations cited: 33EASTMAN BRASS INSTRU…, OSHA inspections: 2 · Violations cited: 11ATCO RUBBER PRODUCTS…, OSHA inspections: 2 · Violations cited: 4JAMES LOUDSPEAKER LLC, OSHA inspections: 2 · Violations cited: 10GRANITE USA, OSHA inspections: 2 · Violations cited: 23CHOWEL WELDPARTS, INC., OSHA inspections: 2 · Violations cited: 14WELTER FOREST PRODUC…, OSHA inspections: 2 · Violations cited: 10CEI EQUIPMENT COMPAN…, OSHA inspections: 2 · Violations cited: 9INDUSTRIAL HEATER CO…, OSHA inspections: 2 · Violations cited: 33NAILOR INDUSTRIES OF…, OSHA inspections: 2 · Violations cited: 15PLASTIPAK PACKAGING,…, OSHA inspections: 2 · Violations cited: 3MOUNTAIN STATE CARBON, OSHA inspections: 2 · Violations cited: 5CENTRAL VALLEY MEAT …, OSHA inspections: 2 · Violations cited: 4Franklin Bronze Prec…, OSHA inspections: 2 · Violations cited: 2
Franklin Bronze Precision Components, LLC has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Franklin Bronze Precision Components, LLC in the Manufacturing enforcement ledger

Manufacturing sector: Franklin Bronze Precision Components, LLC is the #18,225 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($8,000).

How Franklin Bronze Precision Components, LLC Compares

Franklin Bronze Precision Components, LLC's 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-01-11

Last Inspection

2020-11-04

Inspection Span

2 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$4,000

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 1.0 violations per visit. That's $4,000 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$14,746

Current Penalty Amount

$8,000

Penalty Reduction

45.7%

What this shows Penalties were reduced by $6,746 from the initial assessment of $14,746. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Franklin Bronze Precision Components, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Franklin Bronze Precision Components, LLC Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $8,000 $15,763
Avg Penalty per Inspection $4,000 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Franklin Bronze Precision Components, LLC, both outside PA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,000 here).

Pierce Industries LLC $8,000 NY Alsey Refractories Company $8,000 IL Klement Sausage CO., INC. $8,000 WI Franklin Machine & Gear Corporation $8,000 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Southern Tire Mart, LLC 2 insp. Fort Worth, TX Rust-Oleum Corporation 2 insp. Lesage, WV Rich Products Corporation 2 insp. Waycross, GA Monti, INC. 2 insp. Cincinnati, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

JR Wheel
Norton, OH
2 inspections $8,000
K&K Gourmet Meats INC
Leetsdale, PA
2 inspections $8,000
Montana Metal Products LLC
Des Plaines, IL
2 inspections $8,000
Ifco Systems
Columbus, OH
3 inspections $8,000
S&J Sheet Metal Supply
Bronx, NY
2 inspections $8,000

Compare Franklin Bronze Precision Components, LLC vs JR Wheel side-by-side →

What to do with this record

Use Franklin Bronze Precision Components, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Franklin Bronze Precision Components, LLC against JR Wheel, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Franklin Bronze Precision Components, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Franklin Bronze Precision Components, LLC safe to work at? ▼
Based on OSHA records, Franklin Bronze Precision Components, LLC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Franklin Bronze Precision Components, LLC have? ▼
Franklin Bronze Precision Components, LLC has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,000.
How many OSHA inspections has Franklin Bronze Precision Components, LLC had? ▼
Franklin Bronze Precision Components, LLC has had 2 OSHA inspections, with the first recorded on 2019-01-11 and the most recent on 2020-11-04. This averages 1.0 violations per inspection.
What is the total penalty amount for Franklin Bronze Precision Components, LLC? ▼
Franklin Bronze Precision Components, LLC has been assessed $8,000 in current OSHA penalties, reduced from an initial assessment of $14,746 (a 45.7% reduction).
Does Franklin Bronze Precision Components, LLC have any serious or willful violations? ▼
Yes. Franklin Bronze Precision Components, LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Franklin Bronze Precision Components, LLC operate in? ▼
Franklin Bronze Precision Components, LLC operates in the Manufacturing sector (NAICS code 331410). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Franklin Bronze Precision Components, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Franklin Bronze Precision Components, LLC ranks #41,650 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Franklin Bronze Precision Components, LLC's safety record compare to industry average? ▼
Franklin Bronze Precision Components, LLC's total OSHA penalty of $8,000 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Montana Metal Products LLC in Des Plaines, IL is a similar manufacturing employer with $8,000 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.