PlainWorker
Employers › TX

Mining, Quarrying, Oil & Gas · Odessa, TX

FMC Technologies Surface Integrated Services INC

According to OSHA enforcement records (2010–2026), FMC Technologies Surface Integrated Services INC ranks #18,254 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Top 25% by penalty0% serious
$19,358
OSHA penalties
2
Violations cited
2
OSHA inspections
#18,254
of 99,447 penalized employers

FMC Technologies Surface Integrated Services INC in Odessa, TX has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $19,358. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected FMC Technologies Surface Integrated Services INC 2 times over 2 years, roughly annually. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #18,254 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Against the Mining, Quarrying, Oil & Gas industry average of 2 inspections per employer, this sits roughly in line with peers (0.9x the sector average) on inspection frequency. For comparison, Robinson Nevada Mining Company in Ruth, NV is another mining, quarrying, oil & gas employer with 0 OSHA inspections on record and $0 in current penalties.

1.0
violations per inspection
0.0%
of violations were serious
#18,254
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Mining, Quarrying, Oil & Gas per-employer average

in penalties

What this shows FMC Technologies Surface Integrated Services INC runs well above peers (4.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$19,358 Bottom 18% least affordable more affordable than 18% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Mining, Quarrying, Oil & Gas employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is FMC Technologies Surface Integrated Services INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.007.114.221.328.4OSHA inspectionsViolations citedMOST WANTED WELL SER…, OSHA inspections: 2 · Violations cited: 3BAKER HUGHES OILFIEL…, OSHA inspections: 2 · Violations cited: 4CONOCOPHILLIPS COMPANY, OSHA inspections: 2 · Violations cited: 2NORBERG CRUSHING, INC., OSHA inspections: 2 · Violations cited: 3STERLING DRILLING CO…, OSHA inspections: 2 · Violations cited: 4KISSNER GROUP, OSHA inspections: 2 · Violations cited: 6CITGO PETROLEUM CORP…, OSHA inspections: 2 · Violations cited: 3PETROMARK DRILLING LLC, OSHA inspections: 2 · Violations cited: 1CALMAT CO., OSHA inspections: 2 · Violations cited: 2HANSON AGGREGATES LLC, OSHA inspections: 2 · Violations cited: 3P.W. GILLIBRAND CO INC, OSHA inspections: 2 · Violations cited: 0CRESCENT SERVICES, LLC, OSHA inspections: 2 · Violations cited: 0PATTERSON UTI DRILLI…, OSHA inspections: 2 · Violations cited: 0FLUIDS MANAGEMENT II…, OSHA inspections: 2 · Violations cited: 0M & R TRUCKING, OSHA inspections: 2 · Violations cited: 27STEVENS CREEK QUARRY…, OSHA inspections: 2 · Violations cited: 5KMI ZEOLITE INC., OSHA inspections: 2 · Violations cited: 4APACHE CORPORATION, OSHA inspections: 2 · Violations cited: 6SCHWARZGRUBER & SONS…, OSHA inspections: 2 · Violations cited: 0W.S. RED HANCOCK INC., OSHA inspections: 2 · Violations cited: 7FMC Technologies Sur…, OSHA inspections: 2 · Violations cited: 2
FMC Technologies Surface Integrated Services INC has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Mining, Quarrying, Oil & Gas peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

FMC Technologies Surface Integrated Services INC in the Mining, Quarrying, Oil & Gas enforcement ledger

In Mining, Quarrying, Oil & Gas, FMC Technologies Surface Integrated Services INC sits at penalty rank #149 of 1,117 penalized establishments ($19,358 assessed).

How FMC Technologies Surface Integrated Services INC Compares

FMC Technologies Surface Integrated Services INC's 1.00 violations per inspection compares to the Mining, Quarrying, Oil & Gas sector average of 3.1 violations per employer.

Against the Mining, Quarrying, Oil & Gas industry average of $4,539 per employer, this employer's current OSHA penalty runs well above peers (4.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2024-01-25

Last Inspection

2025-09-05

Inspection Span

2 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$9,679

Industry Avg / Inspection

$2,042

What this shows 2 inspections over 2 years, averaging 1.0 violations per visit. That's $9,679 per inspection vs. the Mining, Quarrying, Oil & Gas average of $2,042.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

100.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$32,262

Current Penalty Amount

$19,358

Penalty Reduction

40.0%

What this shows Penalties were reduced by $12,904 from the initial assessment of $32,262. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Mining, Quarrying, Oil & Gas

How FMC Technologies Surface Integrated Services INC compares to the Mining, Quarrying, Oil & Gas sector, which has 2,294 employers tracked by PlainWorker.

Metric FMC Technologies Surface Integrated Services INC Industry Avg
Inspections 2 2.2
Violations 2 3.1
Total Penalty $19,358 $4,539
Avg Penalty per Inspection $9,679 $2,042
View all 2,294 employers in Mining, Quarrying, Oil & Gas →

Nationwide Mining, Quarrying, Oil & Gas peers with similar penalties or inspection counts

Two OSHA-record peer sets for FMC Technologies Surface Integrated Services INC, both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($19,358 here).

Pacific Aggregates INC. $19,500 CA Midland Resource Recovery, INC. $19,013 WV Macpherson Oil Company LLC $19,800 CA Samson Resources $19,800 WY

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Most Wanted Well Service, LLC 2 insp. Watford City, ND Baker Hughes Oilfield Operations, INC. 2 insp. Clinton, OK Conocophillips Company 2 insp. Watford City, ND Norberg Crushing, INC. 2 insp. Lakeside, CA

Nearby & Similar Employers in Mining, Quarrying, Oil & Gas

Showing 5 of 2293 other employers tracked in this sector.

Pacific Aggregates INC.
Lake Elsinore, CA
14 inspections $19,500
Big Bear Aggietech Energy -Hobbs
Hobbs, NM
0 inspections $0
Robinson Nevada Mining Company
Ruth, NV
0 inspections $0
Midland Resource Recovery, INC.
Philippi, WV
2 inspections $19,013
Mewbourne Oil Company
Tyler, TX
0 inspections $0

Compare FMC Technologies Surface Integrated Services INC vs Pacific Aggregates INC. side-by-side →

What to do with this record

Use FMC Technologies Surface Integrated Services INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare FMC Technologies Surface Integrated Services INC against Pacific Aggregates INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether FMC Technologies Surface Integrated Services INC's inspection and penalty record is typical for Mining, Quarrying, Oil & Gas or an outlier against the sector's own average. View the Mining, Quarrying, Oil & Gas sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is FMC Technologies Surface Integrated Services INC safe to work at? ▼
Based on OSHA records, FMC Technologies Surface Integrated Services INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections. Compared to Mining, Quarrying, Oil & Gas industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does FMC Technologies Surface Integrated Services INC have? ▼
FMC Technologies Surface Integrated Services INC has 2 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $19,358.
How many OSHA inspections has FMC Technologies Surface Integrated Services INC had? ▼
FMC Technologies Surface Integrated Services INC has had 2 OSHA inspections, with the first recorded on 2024-01-25 and the most recent on 2025-09-05. This averages 1.0 violations per inspection.
What is the total penalty amount for FMC Technologies Surface Integrated Services INC? ▼
FMC Technologies Surface Integrated Services INC has been assessed $19,358 in current OSHA penalties, reduced from an initial assessment of $32,262 (a 40.0% reduction).
What industry does FMC Technologies Surface Integrated Services INC operate in? ▼
FMC Technologies Surface Integrated Services INC operates in the Mining, Quarrying, Oil & Gas sector (NAICS code 213112). This industry has 2,294 employers tracked by PlainWorker, with 5,098 total OSHA inspections and $10.41M in cumulative penalties.
Where does FMC Technologies Surface Integrated Services INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, FMC Technologies Surface Integrated Services INC ranks #18,254 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does FMC Technologies Surface Integrated Services INC's safety record compare to industry average? ▼
FMC Technologies Surface Integrated Services INC's total OSHA penalty of $19,358 is above the Mining, Quarrying, Oil & Gas industry average of $4,539 per employer (4.3x the average). The employer has 2 inspections compared to the industry average of 2.2 per employer. For a direct comparison, Robinson Nevada Mining Company in Ruth, NV is a similar mining, quarrying, oil & gas employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.