PlainWorker
Employers › LA

Manufacturing · Scott, LA

Flow Control Equipment, LLC

According to OSHA enforcement records (2010–2026), Flow Control Equipment, LLC ranks #32,559 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Upper half by penalty29% serious
$10,923
OSHA penalties
7
Violations cited
2
OSHA inspections
#32,559
of 99,447 penalized employers

Flow Control Equipment, LLC in Scott, LA has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $10,923. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Flow Control Equipment, LLC 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #32,559 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Saturn Industries, INC. in Hudson, NY is another manufacturing employer with 3 OSHA inspections on record and $10,925 in current penalties.

3.5
violations per inspection
28.6%
of violations were serious
#32,559
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Flow Control Equipment, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Flow Control Equipment, LLC runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$10,923 Bottom 33% least affordable more affordable than 33% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Flow Control Equipment, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.59.517.525.533.5OSHA inspectionsViolations citedDANZER VENEER AMERIC…, OSHA inspections: 2 · Violations cited: 22DIXON TICONDEROGA CO…, OSHA inspections: 2 · Violations cited: 10THE QUALITY CASTINGS…, OSHA inspections: 2 · Violations cited: 4DRAGON PRODUCTS, LTD, OSHA inspections: 2 · Violations cited: 11FLAMBEAU, INC., OSHA inspections: 2 · Violations cited: 3Janco Composites, Inc., OSHA inspections: 2 · Violations cited: 4MULTI-CAST CORPORATION, OSHA inspections: 2 · Violations cited: 13CVC SPECIALTY CHEMIC…, OSHA inspections: 2 · Violations cited: 32FABCO EQUIPMENT CO.,…, OSHA inspections: 2 · Violations cited: 23CKKM INC, OSHA inspections: 2 · Violations cited: 30SLANT FIN CORP., OSHA inspections: 2 · Violations cited: 18LAKE CABLE, LLC, OSHA inspections: 2 · Violations cited: 11SIMCOE WOOD PRODUCTS…, OSHA inspections: 2 · Violations cited: 9ROCK WOOL MANUFACTUR…, OSHA inspections: 2 · Violations cited: 15PENGUIN NATURAL FOOD…, OSHA inspections: 2 · Violations cited: 7FLOWERS FOODS, INC., OSHA inspections: 2 · Violations cited: 4THE DUC-PAC CORPORAT…, OSHA inspections: 2 · Violations cited: 8PRIME WOODCRAFT, INC., OSHA inspections: 2 · Violations cited: 11WATCO COMPANIES, LLC, OSHA inspections: 2 · Violations cited: 9ELLIOTT MACHINE SHOP…, OSHA inspections: 2 · Violations cited: 6Flow Control Equipme…, OSHA inspections: 2 · Violations cited: 7
Flow Control Equipment, LLC has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Flow Control Equipment, LLC in the Manufacturing enforcement ledger

In Manufacturing, Flow Control Equipment, LLC sits at penalty rank #14,838 of 35,243 penalized establishments ($10,923 assessed).

How Flow Control Equipment, LLC Compares

Flow Control Equipment, LLC's 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2015-10-08

Last Inspection

2021-08-02

Inspection Span

6 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$5,462

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 3.5 violations per visit. That's $5,462 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

28.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

71.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$23,210

Current Penalty Amount

$10,923

Penalty Reduction

52.9%

What this shows Penalties were reduced by $12,287 from the initial assessment of $23,210. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Flow Control Equipment, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Flow Control Equipment, LLC Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $10,923 $15,763
Avg Penalty per Inspection $5,462 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Flow Control Equipment, LLC, both outside LA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($10,923 here).

Hiossen, INC. $10,923 PA Cache River Valley Seed, LLC $10,924 AR Rex Lumber, Graceville LLC $10,922 FL Pactiv LLC $10,925 CA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Danzer Veneer Americas, INC 2 insp. Williamsport, PA Dixon Ticonderoga Company 2 insp. Neenah, WI The Quality Castings Company 2 insp. Orrville, OH Dragon Products, LTD 2 insp. LA Porte, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Hiossen, INC.
Fairless Hills, PA
2 inspections $10,923
Alliance Apparel
Los Angeles, CA
0 inspections $0
Rex Lumber, Graceville LLC
Graceville, FL
2 inspections $10,922
Pactiv LLC
Stockton, CA
6 inspections $10,925
Saturn Industries, INC.
Hudson, NY
3 inspections $10,925

Compare Flow Control Equipment, LLC vs Hiossen, INC. side-by-side →

What to do with this record

Use Flow Control Equipment, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Flow Control Equipment, LLC against Hiossen, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Flow Control Equipment, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Flow Control Equipment, LLC safe to work at? ▼
Based on OSHA records, Flow Control Equipment, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Flow Control Equipment, LLC have? ▼
Flow Control Equipment, LLC has 7 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $10,923.
How many OSHA inspections has Flow Control Equipment, LLC had? ▼
Flow Control Equipment, LLC has had 2 OSHA inspections, with the first recorded on 2015-10-08 and the most recent on 2021-08-02. This averages 3.5 violations per inspection.
What is the total penalty amount for Flow Control Equipment, LLC? ▼
Flow Control Equipment, LLC has been assessed $10,923 in current OSHA penalties, reduced from an initial assessment of $23,210 (a 52.9% reduction).
Does Flow Control Equipment, LLC have any serious or willful violations? ▼
Yes. Flow Control Equipment, LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Flow Control Equipment, LLC operate in? ▼
Flow Control Equipment, LLC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Flow Control Equipment, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Flow Control Equipment, LLC ranks #32,559 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Flow Control Equipment, LLC's safety record compare to industry average? ▼
Flow Control Equipment, LLC's total OSHA penalty of $10,923 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Saturn Industries, INC. in Hudson, NY is a similar manufacturing employer with $10,925 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.