Manufacturing · Manchester, TN

Fischer USA Stainless Steel Tubing INC

According to OSHA enforcement records (2010–2026), Fischer USA Stainless Steel Tubing INC ranks #50,502 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 9 violations across 2 inspections.

Lower half by penalty78% serious
$5,950
OSHA penalties
9
Violations cited
2
OSHA inspections
#50,502
of 99,447 penalized employers

Fischer USA Stainless Steel Tubing INC in Manchester, TN has been the subject of 2 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,950. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Fischer USA Stainless Steel Tubing INC 2 times over 1 year - more than twice a year on average. These inspections resulted in 9 violations, averaging 4.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #50,502 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Vintage Racing Archives LLC in Stillwater, MN is another manufacturing employer with 2 OSHA inspections on record and $5,950 in current penalties.

4.5
violations per inspection
77.8%
of violations were serious
#50,502
of 99,447 penalized employers

Compliance score

F 25/100
  • F OSHA safety compliance: 9 violations across 2 OSHA inspections (4.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Fischer USA Stainless Steel Tubing INC runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$5,950 Top 49% most affordable more affordable than 51% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Fischer USA Stainless Steel Tubing INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.58.81725.333.5OSHA inspectionsViolations citedAMSTED RAIL COMPANY,…, OSHA inspections: 2 · Violations cited: 32Knowlton Technologie…, OSHA inspections: 2 · Violations cited: 2MODEL SCREW PRODUCTS…, OSHA inspections: 2 · Violations cited: 18HARVEST RICE, INC., OSHA inspections: 2 · Violations cited: 11HOME BREW MART, INC., OSHA inspections: 2 · Violations cited: 16ACME MACHELL COMPANY…, OSHA inspections: 2 · Violations cited: 25AMERIFORGE CORPORATION, OSHA inspections: 2 · Violations cited: 3AMERICAN NICKELOID C…, OSHA inspections: 2 · Violations cited: 3MERSEN USA ACE, OSHA inspections: 2 · Violations cited: 14C & B PIPING (W), INC., OSHA inspections: 2 · Violations cited: 15SALERNO PACKAGING, I…, OSHA inspections: 2 · Violations cited: 14ATLAS MOLDED PRODUCTS, OSHA inspections: 2 · Violations cited: 6KUGLER OIL COMPANY, OSHA inspections: 2 · Violations cited: 7PENTAGON SURFACES, I…, OSHA inspections: 2 · Violations cited: 8NEMESIS METALS LLC, OSHA inspections: 2 · Violations cited: 12ATLAS PAPER MILLS, OSHA inspections: 2 · Violations cited: 122 SISTERS FOOD GROUP…, OSHA inspections: 2 · Violations cited: 3PROACTIVE SOLUTIONS …, OSHA inspections: 2 · Violations cited: 14THERMOSEAL, INC., OSHA inspections: 2 · Violations cited: 12DFA DAIRY BRANDS FLU…, OSHA inspections: 2 · Violations cited: 8Fischer USA Stainles…, OSHA inspections: 2 · Violations cited: 9
Fischer USA Stainless Steel Tubing INC has 2 OSHA inspections on record and 9 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Fischer USA Stainless Steel Tubing INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Fischer USA Stainless Steel Tubing INC ranks #21,452 at $5,950 current penalty.

How Fischer USA Stainless Steel Tubing INC Compares

Fischer USA Stainless Steel Tubing INC's 4.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-02-25

Last Inspection

2016-10-28

Inspection Span

1 yr

Violations / Inspection

4.5

Avg Penalty / Inspection

$2,975

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 4.5 violations per visit. That's $2,975 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

77.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

22.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,950

Current Penalty Amount

$5,950

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Fischer USA Stainless Steel Tubing INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Fischer USA Stainless Steel Tubing INC Industry Avg
Inspections 2 2.6
Violations 9 8.0
Total Penalty $5,950 $15,763
Avg Penalty per Inspection $2,975 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Fischer USA Stainless Steel Tubing INC, both outside TN so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Fischer USA Stainless Steel Tubing INC vs Vintage Racing Archives LLC side-by-side →

What to do with this record

Use Fischer USA Stainless Steel Tubing INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Fischer USA Stainless Steel Tubing INC against Vintage Racing Archives LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Fischer USA Stainless Steel Tubing INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Fischer USA Stainless Steel Tubing INC safe to work at?
Based on OSHA records, Fischer USA Stainless Steel Tubing INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 9 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Fischer USA Stainless Steel Tubing INC have?
Fischer USA Stainless Steel Tubing INC has 9 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $5,950.
How many OSHA inspections has Fischer USA Stainless Steel Tubing INC had?
Fischer USA Stainless Steel Tubing INC has had 2 OSHA inspections, with the first recorded on 2016-02-25 and the most recent on 2016-10-28. This averages 4.5 violations per inspection.
What is the total penalty amount for Fischer USA Stainless Steel Tubing INC?
Fischer USA Stainless Steel Tubing INC has been assessed $5,950 in current OSHA penalties.
Does Fischer USA Stainless Steel Tubing INC have any serious or willful violations?
Yes. Fischer USA Stainless Steel Tubing INC has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Fischer USA Stainless Steel Tubing INC operate in?
Fischer USA Stainless Steel Tubing INC operates in the Manufacturing sector (NAICS code 332116). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Fischer USA Stainless Steel Tubing INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Fischer USA Stainless Steel Tubing INC ranks #50,502 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Fischer USA Stainless Steel Tubing INC's safety record compare to industry average?
Fischer USA Stainless Steel Tubing INC's total OSHA penalty of $5,950 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Vintage Racing Archives LLC in Stillwater, MN is a similar manufacturing employer with $5,950 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.