PlainWorker
Employers › NY

Manufacturing · Brooklyn, NY

F & C Professional Aluminum Railings CORP.

According to OSHA enforcement records (2010–2026), F & C Professional Aluminum Railings CORP. ranks #4,238 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 2 violations across 2 inspections.

Top 5% by penalty0% serious
$57,000
OSHA penalties
2
Violations cited
2
OSHA inspections
#4,238
of 99,447 penalized employers

F & C Professional Aluminum Railings CORP. in Brooklyn, NY has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $57,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected F & C Professional Aluminum Railings CORP. 2 times over 2 years, roughly annually. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #4,238 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 0 were classified as serious and 1 as willful - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, DSM Metal Fabrication in Biddeford, ME is another manufacturing employer with 3 OSHA inspections on record and $56,993 in current penalties.

1.0
violations per inspection
0.0%
of violations were serious
#4,238
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows F & C Professional Aluminum Railings CORP. runs well above peers (3.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$57,000 Bottom 4% least affordable more affordable than 4% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($57,000) is well above this band, the chart's rightmost open-ended bucket. This employer: $57,000 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is F & C Professional Aluminum Railings CORP..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0012.825.738.551.4OSHA inspectionsViolations citedWHITESELL CORPORATION, OSHA inspections: 2 · Violations cited: 23INDUSTRIAL PACKAGING…, OSHA inspections: 2 · Violations cited: 31OHIO GASKET & SHIM C…, OSHA inspections: 2 · Violations cited: 16HARMAC REBAR & STEEL…, OSHA inspections: 2 · Violations cited: 7PINTER MEMORIALS INC, OSHA inspections: 2 · Violations cited: 32DICAPERL MINERALS CO…, OSHA inspections: 2 · Violations cited: 19PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5DAVID ELLIOT POULTRY…, OSHA inspections: 2 · Violations cited: 14RELIANCE PRECAST SYS…, OSHA inspections: 2 · Violations cited: 25HIXSON LUMBER COMPAN…, OSHA inspections: 2 · Violations cited: 12GGI GLASS DISTRIBUTO…, OSHA inspections: 2 · Violations cited: 5MERLIN INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 15THE BREWER COMPANY, OSHA inspections: 2 · Violations cited: 19CARLEX GLASS AMERICA…, OSHA inspections: 2 · Violations cited: 3EISENBACK EQUIPMENT …, OSHA inspections: 2 · Violations cited: 49TRINDCO, OSHA inspections: 2 · Violations cited: 15SIMMONS CUSTOM RIGGING, OSHA inspections: 2 · Violations cited: 19CP MANUFACTURING, INC., OSHA inspections: 2 · Violations cited: 6SCHENCK PROCESS, LLC, OSHA inspections: 2 · Violations cited: 7MAGNETIC METALS CORP…, OSHA inspections: 2 · Violations cited: 18F & C Professional A…, OSHA inspections: 2 · Violations cited: 2
F & C Professional Aluminum Railings CORP. has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

F & C Professional Aluminum Railings CORP. in the Manufacturing enforcement ledger

Manufacturing sector: F & C Professional Aluminum Railings CORP. is the #2,152 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($57,000).

How F & C Professional Aluminum Railings CORP. Compares

F & C Professional Aluminum Railings CORP.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2022-02-11

Last Inspection

2024-05-22

Inspection Span

2 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$28,500

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 1.0 violations per visit. That's $28,500 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

0

Serious

0.0% of total

1

Willful

50.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$82,665

Current Penalty Amount

$57,000

Penalty Reduction

31.0%

What this shows Penalties were reduced by $25,665 from the initial assessment of $82,665. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How F & C Professional Aluminum Railings CORP. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric F & C Professional Aluminum Railings CORP. Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $57,000 $15,763
Avg Penalty per Inspection $28,500 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for F & C Professional Aluminum Railings CORP., both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($57,000 here).

Polyglass Coatings Limited LLC $57,000 OK Rogupe Sasa Molding INC. $57,000 TX Midwest Manufacturing and Distributing, INC. DBA Midwest Metal Forming $57,000 IL DSM Metal Fabrication $56,993 ME

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Whitesell Corporation 2 insp. Tuscumbia, AL Industrial Packaging Corporation 2 insp. Arcadia, WI Ohio Gasket & Shim Company 2 insp. Akron, OH Harmac Rebar & Steel CORP 2 insp. Fryeburg, ME

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Polyglass Coatings Limited LLC
Oklahoma City, OK
2 inspections $57,000
Rogupe Sasa Molding INC.
El Paso, TX
6 inspections $57,000
Midwest Manufacturing and Distributing, INC. DBA Midwest Metal Forming
Chicago, IL
2 inspections $57,000
DSM Metal Fabrication
Biddeford, ME
3 inspections $56,993
Universal Metrics, LLC
Menomonee Falls, WI
4 inspections $57,018

Compare F & C Professional Aluminum Railings CORP. vs Polyglass Coatings Limited LLC side-by-side →

What to do with this record

Use F & C Professional Aluminum Railings CORP.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare F & C Professional Aluminum Railings CORP. against Polyglass Coatings Limited LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether F & C Professional Aluminum Railings CORP.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is F & C Professional Aluminum Railings CORP. safe to work at? ▼
Based on OSHA records, F & C Professional Aluminum Railings CORP.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 2 violations across 2 inspections. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does F & C Professional Aluminum Railings CORP. have? ▼
F & C Professional Aluminum Railings CORP. has 2 OSHA violations on record, including 0 serious, 1 willful, and 0 repeat violations. The total current penalty amount is $57,000.
How many OSHA inspections has F & C Professional Aluminum Railings CORP. had? ▼
F & C Professional Aluminum Railings CORP. has had 2 OSHA inspections, with the first recorded on 2022-02-11 and the most recent on 2024-05-22. This averages 1.0 violations per inspection.
What is the total penalty amount for F & C Professional Aluminum Railings CORP.? ▼
F & C Professional Aluminum Railings CORP. has been assessed $57,000 in current OSHA penalties, reduced from an initial assessment of $82,665 (a 31.0% reduction).
Does F & C Professional Aluminum Railings CORP. have any serious or willful violations? ▼
Yes. F & C Professional Aluminum Railings CORP. has 0 serious violations, 1 willful violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does F & C Professional Aluminum Railings CORP. operate in? ▼
F & C Professional Aluminum Railings CORP. operates in the Manufacturing sector (NAICS code 332323). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does F & C Professional Aluminum Railings CORP. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, F & C Professional Aluminum Railings CORP. ranks #4,238 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does F & C Professional Aluminum Railings CORP.'s safety record compare to industry average? ▼
F & C Professional Aluminum Railings CORP.'s total OSHA penalty of $57,000 is above the Manufacturing industry average of $15,763 per employer (3.6x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, DSM Metal Fabrication in Biddeford, ME is a similar manufacturing employer with $56,993 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.