Manufacturing · Minneapolis, MN

Engineering Unlimited INC

According to OSHA enforcement records (2010–2026), Engineering Unlimited INC ranks #71,019 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 9 violations across 2 inspections.

Lower half by penalty78% serious
$2,658
OSHA penalties
9
Violations cited
2
OSHA inspections
#71,019
of 99,447 penalized employers

Engineering Unlimited INC in Minneapolis, MN has been the subject of 2 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,658. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Engineering Unlimited INC 2 times over 3 years, roughly once every couple of years. These inspections resulted in 9 violations, averaging 4.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #71,019 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Cooper Standard Automotive in Gaylord, MI is another manufacturing employer with 5 OSHA inspections on record and $2,660 in current penalties.

4.5
violations per inspection
77.8%
of violations were serious
#71,019
of 99,447 penalized employers

Compliance score

F 25/100
  • F OSHA safety compliance: 9 violations across 2 OSHA inspections (4.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Engineering Unlimited INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Engineering Unlimited INC runs well below peers (0.17x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,658 Top 29% most affordable more affordable than 71% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Engineering Unlimited INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.010.821.532.243.0OSHA inspectionsViolations citedORBITAL ATK INC., OSHA inspections: 2 · Violations cited: 12NEXHAUL, INC., OSHA inspections: 2 · Violations cited: 32BELGIOIOSO CHEESE, I…, OSHA inspections: 2 · Violations cited: 18LIPPERT COMPONENTS, …, OSHA inspections: 2 · Violations cited: 8SEMICONDUCTOR COMPON…, OSHA inspections: 2 · Violations cited: 3COLEPAK, INC., OSHA inspections: 2 · Violations cited: 8SINCLAIR CASPER REFI…, OSHA inspections: 2 · Violations cited: 41RENO REFRACTORIES, I…, OSHA inspections: 2 · Violations cited: 9MERCK, SHARPE & DOHM…, OSHA inspections: 2 · Violations cited: 2SIOUX CHIEF MANUFACT…, OSHA inspections: 2 · Violations cited: 4ROM CORPORATION, OSHA inspections: 2 · Violations cited: 8S & H CABINETS & MAN…, OSHA inspections: 2 · Violations cited: 7EMECO INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 25DOUBLE 'R' SHARPENING, OSHA inspections: 2 · Violations cited: 20TWIN MARQUIS, INC., OSHA inspections: 2 · Violations cited: 2JOHNSTOWN FEED MILL,…, OSHA inspections: 2 · Violations cited: 25GROVE INDUSTRIES INC, OSHA inspections: 2 · Violations cited: 23S-5! MANUFACTURING, OSHA inspections: 2 · Violations cited: 5INTERNATIONAL PAPER …, OSHA inspections: 2 · Violations cited: 2TRIAD METAL PRODUCTS…, OSHA inspections: 2 · Violations cited: 11Engineering Unlimite…, OSHA inspections: 2 · Violations cited: 9
Engineering Unlimited INC has 2 OSHA inspections on record and 9 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Engineering Unlimited INC in the Manufacturing enforcement ledger

In Manufacturing, Engineering Unlimited INC sits at penalty rank #28,125 of 35,243 penalized establishments ($2,658 assessed).

How Engineering Unlimited INC Compares

Engineering Unlimited INC's 4.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.17x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-09-22

Last Inspection

2014-01-24

Inspection Span

3 yrs

Violations / Inspection

4.5

Avg Penalty / Inspection

$1,329

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 4.5 violations per visit. That's $1,329 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

77.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

22.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,725

Current Penalty Amount

$2,658

Penalty Reduction

2.5%

What this shows Penalties were reduced by $67 from the initial assessment of $2,725. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Engineering Unlimited INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Engineering Unlimited INC Industry Avg
Inspections 2 2.6
Violations 9 8.0
Total Penalty $2,658 $15,763
Avg Penalty per Inspection $1,329 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Engineering Unlimited INC, both outside MN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,658 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Engineering Unlimited INC vs Mott Corporation side-by-side →

What to do with this record

Use Engineering Unlimited INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Engineering Unlimited INC against Mott Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Engineering Unlimited INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Engineering Unlimited INC safe to work at?
Based on OSHA records, Engineering Unlimited INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 9 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Engineering Unlimited INC have?
Engineering Unlimited INC has 9 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,658.
How many OSHA inspections has Engineering Unlimited INC had?
Engineering Unlimited INC has had 2 OSHA inspections, with the first recorded on 2010-09-22 and the most recent on 2014-01-24. This averages 4.5 violations per inspection.
What is the total penalty amount for Engineering Unlimited INC?
Engineering Unlimited INC has been assessed $2,658 in current OSHA penalties, reduced from an initial assessment of $2,725 (a 2.5% reduction).
Does Engineering Unlimited INC have any serious or willful violations?
Yes. Engineering Unlimited INC has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Engineering Unlimited INC operate in?
Engineering Unlimited INC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Engineering Unlimited INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Engineering Unlimited INC ranks #71,019 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Engineering Unlimited INC's safety record compare to industry average?
Engineering Unlimited INC's total OSHA penalty of $2,658 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Cooper Standard Automotive in Gaylord, MI is a similar manufacturing employer with $2,660 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.