PlainWorker
Employers › MO

Manufacturing · Moscow Mills, MO

Elite Tool LLC

According to OSHA enforcement records (2010–2026), Elite Tool LLC has a concerning safety record: 8 violations across 2 inspections. See the full breakdown below.

Upper half by penalty75% serious
$13,603
OSHA penalties
8
Violations cited
2
OSHA inspections
#26,731
of 100,495 penalized employers

Elite Tool LLC in Moscow Mills, MO has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $13,603. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Elite Tool LLC 2 times over 4 years, roughly once every couple of years. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Cleveland Cliffs Indiana Harbor in East Chicago, IN is another manufacturing employer with 4 OSHA inspections on record and $13,600 in current penalties.

4.0
violations per inspection
75.0%
of violations were serious
73%
of penalized employers rank lower

How Elite Tool LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Elite Tool LLC sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$13,603 Bottom 27% least affordable more affordable than 27% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Elite Tool LLC

The federal enforcement record for Elite Tool LLC in Moscow Mills, MO includes 2 OSHA inspections and 8 violations, translating to 4.00 violations per inspection. Of those violations, 6 (75.0%) were classified as serious, 0 (0.0%) as willful, and 1 (12.5%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $28,525 in initial penalties against this employer, later adjusted to a current total of $13,603 - a 52.3% reduction. Average penalty per inspection works out to $6,802. Against the Manufacturing industry average of $15,410 per employer, this record sits roughly in line with peers (0.9x the sector average).

Inspection activity spans from 2012-02-10 to 2015-11-17, a window of roughly 4 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-02-10

Last Inspection

2015-11-17

Inspection Span

4 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$6,802

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 4 years, averaging 4.0 violations per visit. That's $6,802 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

6

Serious

75.0% of total

0

Willful

0.0% of total

1

Repeat

12.5% of total

1

Other-Than-Serious

12.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$28,525

Current Penalty Amount

$13,603

Penalty Reduction

52.3%

What this shows Penalties were reduced by $14,922 from the initial assessment of $28,525. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Elite Tool LLC compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Elite Tool LLC Industry Avg
Inspections 2 2.5
Violations 8 7.8
Total Penalty $13,603 $15,410
Avg Penalty per Inspection $6,802 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Cooper-Wilkins Welding & Machine Company, INC.
Mobile, AL
3 inspections $13,606
Cadon Acquisitions LLC DBA Cadon Plating and Coatings LLC
Wyandotte, MI
5 inspections $13,600
West Fraser, INC.
Maplesville, AL
4 inspections $13,600
Motor City Wash Works INC
Wixom, MI
4 inspections $13,600
Cleveland Cliffs Indiana Harbor
East Chicago, IN
4 inspections $13,600

Compare Elite Tool LLC vs Cooper-Wilkins Welding & Machine Company, INC. side-by-side →

Frequently Asked Questions

Is Elite Tool LLC safe to work at? ▼
Based on OSHA records, Elite Tool LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Elite Tool LLC have? ▼
Elite Tool LLC has 8 OSHA violations on record, including 6 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $13,603.
How many OSHA inspections has Elite Tool LLC had? ▼
Elite Tool LLC has had 2 OSHA inspections, with the first recorded on 2012-02-10 and the most recent on 2015-11-17. This averages 4.0 violations per inspection.
What is the total penalty amount for Elite Tool LLC? ▼
Elite Tool LLC has been assessed $13,603 in current OSHA penalties, reduced from an initial assessment of $28,525 (a 52.3% reduction).
Does Elite Tool LLC have any serious or willful violations? ▼
Yes. Elite Tool LLC has 6 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Elite Tool LLC operate in? ▼
Elite Tool LLC operates in the Manufacturing sector (NAICS code 332710). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Elite Tool LLC's safety record compare to industry average? ▼
Elite Tool LLC's total OSHA penalty of $13,603 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Cleveland Cliffs Indiana Harbor in East Chicago, IN is a similar manufacturing employer with $13,600 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in MO

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Elite Tool LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.