PlainWorker
Employers › CO

Manufacturing · Denver, CO

Electro-Mechanical Products, INC.

According to OSHA enforcement records (2010–2026), Electro-Mechanical Products, INC. ranks #73,528 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 6 violations across 2 inspections.

Lower half by penalty33% serious
$2,375
OSHA penalties
6
Violations cited
2
OSHA inspections
#73,528
of 99,447 penalized employers

Electro-Mechanical Products, INC. in Denver, CO has been the subject of 2 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,375. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Electro-Mechanical Products, INC. 2 times over 2 years, roughly annually. These inspections resulted in 6 violations, averaging 3.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #73,528 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Machining Concepts INC in Blaine, MN is another manufacturing employer with 2 OSHA inspections on record and $2,375 in current penalties.

3.0
violations per inspection
33.3%
of violations were serious
#73,528
of 99,447 penalized employers

Compliance score

F 46/100
  • F OSHA safety compliance: 6 violations across 2 OSHA inspections (3.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Electro-Mechanical Products, INC. runs well below peers (0.15x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,375 Top 26% most affordable more affordable than 74% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Electro-Mechanical Products, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0013.927.841.755.6OSHA inspectionsViolations citedPRESTIGE INDUSTRIES,…, OSHA inspections: 2 · Violations cited: 11FOX VALLEY SYSTEMS, …, OSHA inspections: 2 · Violations cited: 48AMERICAN MARAZZI TIL…, OSHA inspections: 2 · Violations cited: 44HBD/THERMOID, INC., OSHA inspections: 2 · Violations cited: 53PALLFLEX COMPANY, OSHA inspections: 2 · Violations cited: 40NITTA CASINGS, INC., OSHA inspections: 2 · Violations cited: 21SHEREX FASTENING SOL…, OSHA inspections: 2 · Violations cited: 6PALOS VERDES BLDG. C…, OSHA inspections: 2 · Violations cited: 12COLUMBUS ROOF TRUSSE…, OSHA inspections: 2 · Violations cited: 16BPI RECYCLING, LLC, OSHA inspections: 2 · Violations cited: 27EDGEWELL PERSONAL CA…, OSHA inspections: 2 · Violations cited: 1THE QUIKRETE COMPANI…, OSHA inspections: 2 · Violations cited: 4SGFW BAKERS INC, OSHA inspections: 2 · Violations cited: 5D & G PALLET SERVICE…, OSHA inspections: 2 · Violations cited: 8SMITH FILTER CORPORA…, OSHA inspections: 2 · Violations cited: 7TAYLOR-LISTUG, INC., OSHA inspections: 2 · Violations cited: 17DOUGLAS PRESS, INC., OSHA inspections: 2 · Violations cited: 9CHURCH CHAIRS OF AME…, OSHA inspections: 2 · Violations cited: 6LORAIN COUNTY AUTOMO…, OSHA inspections: 2 · Violations cited: 7BROOKLYN BOTTLING CO…, OSHA inspections: 2 · Violations cited: 24Electro-Mechanical P…, OSHA inspections: 2 · Violations cited: 6
Electro-Mechanical Products, INC. has 2 OSHA inspections on record and 6 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Electro-Mechanical Products, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Electro-Mechanical Products, INC. is the #28,854 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,375).

How Electro-Mechanical Products, INC. Compares

Electro-Mechanical Products, INC.'s 3.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.15x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2010-01-20

Last Inspection

2012-01-12

Inspection Span

2 yrs

Violations / Inspection

3.0

Avg Penalty / Inspection

$1,188

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 2 years, averaging 3.0 violations per visit. That's $1,188 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

33.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

4

Other-Than-Serious

66.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$2,725

Current Penalty Amount

$2,375

Penalty Reduction

12.8%

What this shows Penalties were reduced by $350 from the initial assessment of $2,725. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Electro-Mechanical Products, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Electro-Mechanical Products, INC. Industry Avg
Inspections 2 2.6
Violations 6 8.0
Total Penalty $2,375 $15,763
Avg Penalty per Inspection $1,188 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Electro-Mechanical Products, INC., both outside CO so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($2,375 here).

West Michigan Molding INC $2,375 MI Menominee Acquisition CORP DBA Dunn Paper $2,375 MI J.C.M. Industries, INC $2,375 UT Wayne Farms LLC $2,375 NC

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Prestige Industries, LLC 2 insp. Paterson, NJ Fox Valley Systems, INC. 2 insp. Cary, IL American Marazzi Tile, INC. 2 insp. Sunnyvale, TX HBD/Thermoid, INC. 2 insp. Salisbury, NC

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

West Michigan Molding INC
Grand Haven, MI
3 inspections $2,375
Menominee Acquisition CORP DBA Dunn Paper
Menominee, MI
2 inspections $2,375
J.C.M. Industries, INC
Salt Lake City, UT
2 inspections $2,375
Wayne Farms LLC
Dobson, NC
4 inspections $2,375
Machining Concepts INC
Blaine, MN
2 inspections $2,375

Compare Electro-Mechanical Products, INC. vs West Michigan Molding INC side-by-side →

What to do with this record

Use Electro-Mechanical Products, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Electro-Mechanical Products, INC. against West Michigan Molding INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Electro-Mechanical Products, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Electro-Mechanical Products, INC. safe to work at? ▼
Based on OSHA records, Electro-Mechanical Products, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 6 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Electro-Mechanical Products, INC. have? ▼
Electro-Mechanical Products, INC. has 6 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,375.
How many OSHA inspections has Electro-Mechanical Products, INC. had? ▼
Electro-Mechanical Products, INC. has had 2 OSHA inspections, with the first recorded on 2010-01-20 and the most recent on 2012-01-12. This averages 3.0 violations per inspection.
What is the total penalty amount for Electro-Mechanical Products, INC.? ▼
Electro-Mechanical Products, INC. has been assessed $2,375 in current OSHA penalties, reduced from an initial assessment of $2,725 (a 12.8% reduction).
Does Electro-Mechanical Products, INC. have any serious or willful violations? ▼
Yes. Electro-Mechanical Products, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Electro-Mechanical Products, INC. operate in? ▼
Electro-Mechanical Products, INC. operates in the Manufacturing sector (NAICS code 335999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Electro-Mechanical Products, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Electro-Mechanical Products, INC. ranks #73,528 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Electro-Mechanical Products, INC.'s safety record compare to industry average? ▼
Electro-Mechanical Products, INC.'s total OSHA penalty of $2,375 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Machining Concepts INC in Blaine, MN is a similar manufacturing employer with $2,375 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.