Manufacturing · Lawrenceburg, TN

Dyna-Pak Corporation

According to OSHA enforcement records (2010–2026), Dyna-Pak Corporation ranks #40,383 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 25 violations across 3 inspections.

Upper half by penalty48% serious
$8,325
OSHA penalties
25
Violations cited
3
OSHA inspections
#40,383
of 99,447 penalized employers

Dyna-Pak Corporation in Lawrenceburg, TN has been the subject of 3 OSHA workplace inspections and 25 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $8,325. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dyna-Pak Corporation 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 25 violations, averaging 8.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #40,383 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Pinnacle Metal Products in Columbus, OH is another manufacturing employer with 2 OSHA inspections on record and $8,330 in current penalties.

8.3
violations per inspection
48.0%
of violations were serious
#40,383
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 25 violations across 3 OSHA inspections (8.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Dyna-Pak Corporation compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Dyna-Pak Corporation runs moderately below peers (0.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$8,325 Bottom 41% least affordable more affordable than 41% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Dyna-Pak Corporation.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.98.014.020.126.1OSHA inspectionsViolations citedHALIBURTON INTERNATI…, OSHA inspections: 3 · Violations cited: 21SCHREIBER FOODS, OSHA inspections: 3 · Violations cited: 14THE BAKER COMPANY, OSHA inspections: 3 · Violations cited: 21COLORADO BETTER KITC…, OSHA inspections: 3 · Violations cited: 10NEVADA PRECISION SHE…, OSHA inspections: 3 · Violations cited: 13INTEGRITY FUSION PRO…, OSHA inspections: 3 · Violations cited: 7FRONTERA TEXTILE DIS…, OSHA inspections: 3 · Violations cited: 5ATLANTIC PRECAST CON…, OSHA inspections: 3 · Violations cited: 21R. M. PALMER COMPANY, OSHA inspections: 3 · Violations cited: 8CHALMERS & KUBECK NO…, OSHA inspections: 3 · Violations cited: 8CORAL INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 6BETTS COMPANY, OSHA inspections: 3 · Violations cited: 3ONGNA WOOD PRODUCTS …, OSHA inspections: 3 · Violations cited: 17SHM NEB, LLC, OSHA inspections: 3 · Violations cited: 10COLEMAN COMPANY, INC, OSHA inspections: 3 · Violations cited: 3THE ARTHUR CORPORATION, OSHA inspections: 3 · Violations cited: 16ARLINGTON INDUSTRIES…, OSHA inspections: 3 · Violations cited: 4MIDWEST MANUFACTURIN…, OSHA inspections: 3 · Violations cited: 6HOUSE OF RAEFORD FAR…, OSHA inspections: 3 · Violations cited: 4ROTELLA'S ITALIAN BA…, OSHA inspections: 3 · Violations cited: 3Dyna-Pak Corporation, OSHA inspections: 3 · Violations cited: 25
Dyna-Pak Corporation has 3 OSHA inspections on record and 25 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Dyna-Pak Corporation in the Manufacturing enforcement ledger

Manufacturing sector: Dyna-Pak Corporation is the #17,841 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($8,325).

How Dyna-Pak Corporation Compares

Dyna-Pak Corporation's 8.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2011-03-01

Last Inspection

2020-10-29

Inspection Span

10 yrs

Violations / Inspection

8.3

Avg Penalty / Inspection

$2,775

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 8.3 violations per visit. That's $2,775 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

48.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

13

Other-Than-Serious

52.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$12,150

Current Penalty Amount

$8,325

Penalty Reduction

31.5%

What this shows Penalties were reduced by $3,825 from the initial assessment of $12,150. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Dyna-Pak Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Dyna-Pak Corporation Industry Avg
Inspections 3 2.6
Violations 25 8.0
Total Penalty $8,325 $15,763
Avg Penalty per Inspection $2,775 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Dyna-Pak Corporation, both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($8,325 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Dyna-Pak Corporation vs Reliant Industries INC side-by-side →

What to do with this record

Use Dyna-Pak Corporation's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Dyna-Pak Corporation against Reliant Industries INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Dyna-Pak Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Dyna-Pak Corporation safe to work at?
Based on OSHA records, Dyna-Pak Corporation's workplace safety record is concerning, with multiple serious compliance issues. The employer has 25 violations across 3 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dyna-Pak Corporation have?
Dyna-Pak Corporation has 25 OSHA violations on record, including 12 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $8,325.
How many OSHA inspections has Dyna-Pak Corporation had?
Dyna-Pak Corporation has had 3 OSHA inspections, with the first recorded on 2011-03-01 and the most recent on 2020-10-29. This averages 8.3 violations per inspection.
What is the total penalty amount for Dyna-Pak Corporation?
Dyna-Pak Corporation has been assessed $8,325 in current OSHA penalties, reduced from an initial assessment of $12,150 (a 31.5% reduction).
Does Dyna-Pak Corporation have any serious or willful violations?
Yes. Dyna-Pak Corporation has 12 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Dyna-Pak Corporation operate in?
Dyna-Pak Corporation operates in the Manufacturing sector (NAICS code 326111). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Dyna-Pak Corporation rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Dyna-Pak Corporation ranks #40,383 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Dyna-Pak Corporation's safety record compare to industry average?
Dyna-Pak Corporation's total OSHA penalty of $8,325 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Pinnacle Metal Products in Columbus, OH is a similar manufacturing employer with $8,330 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.