PlainWorker
Employers › TN

Construction · MEMPHIS, TN

DUNBAR MECHANICAL CONTRACTORS

OSHA records show a concerning safety record: 6 violations across 3 inspections — below the Construction industry average for penalties.

3
OSHA inspections
6
Violations cited
$152
OSHA penalties
$1,155
Back wages owed

DUNBAR MECHANICAL CONTRACTORS in MEMPHIS, TN has been the subject of 3 OSHA workplace inspections and 6 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $152. The employer also has Wage and Hour Division (WHD) compliance actions on record, covering Fair Labor Standards Act enforcement including minimum wage and overtime violations. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

DUNBAR MECHANICAL CONTRACTORS has been inspected 3 times by OSHA over 1 year. These inspections resulted in 6 violations, averaging 2.0 violations per inspection. Compared to the Construction industry average of 2 inspections per employer, DUNBAR MECHANICAL CONTRACTORS has been inspected more frequently. The Department of Labor also found wage violations, with $1,155 in back wages owed to 5 workers.

2.0
violations per inspection
0.0%
of violations were serious
0.02×
Construction industry-avg penalty
$1,155
in back wages recovered

How DUNBAR MECHANICAL CONTRACTORS compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows DUNBAR MECHANICAL CONTRACTORS sits below the Construction per-employer average, a comparatively lighter enforcement footprint than its peers.

Source U.S. Department of Labor — OSHA enforcement extracts As of 2026

What the Data Says About DUNBAR MECHANICAL CONTRACTORS

The federal enforcement record for DUNBAR MECHANICAL CONTRACTORS in MEMPHIS, TN includes 3 OSHA inspections and 6 violations, translating to 2.00 violations per inspection. Of those violations, 0 (0.0%) were classified as serious, 0 (0.0%) as willful, and 2 (33.3%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $152 in initial penalties against this employer, later adjusted to a current total of $152 — no reduction from the original assessment. Average penalty per inspection works out to $51. Against the Construction industry average of $6,657 per employer, this record runs below peers. The Wage and Hour Division added 2 cases producing $1,155 in back wages owed to 5 affected workers.

Inspection activity spans from 2013-05-07 to 2014-09-09, a window of roughly 1 year. This record draws directly from the U.S. Department of Labor's public enforcement data at data.dol.gov. Penalty amounts reflect final adjudicated figures after any settlement, informal conference, or formal contest. Workers, journalists, and researchers can use these figures to compare this employer's compliance posture against industry peers and to identify workplaces with elevated safety risks or repeat non-compliance.

OSHA Inspection History

Total Inspections
3
First Inspection
2013-05-07
Last Inspection
2014-09-09
Inspection Span
1 year
Violations per Inspection
2.0
Avg Penalty per Inspection
$51
Industry Avg per Inspection
$3,325

Violation Breakdown

0
Serious
0.0% of total
0
Willful
0.0% of total
2
Repeat
33.3% of total
4
Other-Than-Serious
66.7% of total

Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Penalty Analysis

Initial Penalty Assessed
$152
Current Penalty Amount
$152
Penalty Reduction
None
Combined Financial Impact (OSHA + WHD)
$1,307

Wage & Hour Findings

WHD Cases
2
Back Wages Owed
$1,155
Employees Affected
5
WHD Violations
8
Avg Back Wages per Employee
$231
Avg Back Wages per Case
$578

The Department of Labor's Wage and Hour Division found that DUNBAR MECHANICAL CONTRACTORS owed $1,155 in back wages to 5 employees across 2 cases and 8 violations. WHD enforces federal labor laws including the Fair Labor Standards Act (FLSA), covering minimum wage, overtime pay, and child labor standards.

Industry Safety Context: Construction

How DUNBAR MECHANICAL CONTRACTORS compares to the Construction sector, which has 60,370 employers tracked by PlainWorker.

Metric DUNBAR MECHANICAL CONTRACTORS Industry Avg
Inspections 3 2.0
Violations 6 3.3
Total Penalty $152 $6,657
Avg Penalty per Inspection $51 $3,325
View all 60,370 employers in Construction →

Explore related data

Construction safety record →

Inspections, violations, and penalties across the Construction sector.
TN enforcement →

Top violators and statewide OSHA & WHD totals for TN.
Most-penalized employers →

The 100 employers carrying the heaviest OSHA penalties nationwide.

Workplace Safety Guides

Understanding OSHA Inspections

What triggers an inspection and what to expect during the process
How to Read an OSHA Inspection Report

Decode violation types, penalty amounts, and compliance outcomes
Your Rights Under OSHA

Know your workplace safety rights and how to exercise them
Wage Theft Explained

Common forms of wage theft and how to recover unpaid wages
Most Dangerous Industries

Which industries face the highest rates of violations and penalties
Industries With Most OSHA Violations

Data-driven breakdown of violation leaders by sector

Nearby & Similar Employers in Construction

KEYSTONE CONSTRUCTION & MAINTENANCE
MIDDLETOWN, CT
3 inspections $6.55M
Spencer Construction LLC
TUCSON, AZ
0 inspections $0
Southwest Valley Constructors
Albuquerque, NM
0 inspections $0
GenStrong
Rio Grande, PR
0 inspections $0
MCC INTERNATIONAL SAIPAN LTD. CO.
SAIPAN, MP
5 inspections $76,693

Compare DUNBAR MECHANICAL CONTRACTORS vs KEYSTONE CONSTRUCTION & MAINTENANCE side-by-side →

Frequently Asked Questions

Is DUNBAR MECHANICAL CONTRACTORS safe to work at? ▼
Based on OSHA records, DUNBAR MECHANICAL CONTRACTORS's workplace safety record is concerning, with multiple serious compliance issues. The employer has 6 violations across 3 inspections. Compared to Construction industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does DUNBAR MECHANICAL CONTRACTORS have? ▼
DUNBAR MECHANICAL CONTRACTORS has 6 OSHA violations on record, including 0 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $152.
How many OSHA inspections has DUNBAR MECHANICAL CONTRACTORS had? ▼
DUNBAR MECHANICAL CONTRACTORS has had 3 OSHA inspections, with the first recorded on 2013-05-07 and the most recent on 2014-09-09. This averages 2.0 violations per inspection.
What is the total penalty amount for DUNBAR MECHANICAL CONTRACTORS? ▼
DUNBAR MECHANICAL CONTRACTORS has been assessed $152 in current OSHA penalties. Additionally, $1,155 in back wages were owed through WHD enforcement.
Does DUNBAR MECHANICAL CONTRACTORS have any serious or willful violations? ▼
Yes. DUNBAR MECHANICAL CONTRACTORS has 0 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has DUNBAR MECHANICAL CONTRACTORS been cited for wage theft? ▼
Yes. The Department of Labor's Wage and Hour Division has recorded 2 enforcement cases against DUNBAR MECHANICAL CONTRACTORS, resulting in $1,155 in back wages owed to 5 affected employees. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does DUNBAR MECHANICAL CONTRACTORS operate in? ▼
DUNBAR MECHANICAL CONTRACTORS operates in the Construction sector (NAICS code 238220). This industry has 60,370 employers tracked by PlainWorker, with 120,874 total OSHA inspections and $401.89M in cumulative penalties.
What are my rights if I work at DUNBAR MECHANICAL CONTRACTORS? ▼
Under the Occupational Safety and Health Act, employees at DUNBAR MECHANICAL CONTRACTORS have the right to a safe workplace, the right to report hazards without retaliation, the right to request an OSHA inspection, and the right to access their own exposure and medical records. Workers can also refuse dangerous work if they believe they face imminent danger and their employer has failed to address the hazard.
How do I file an OSHA complaint against DUNBAR MECHANICAL CONTRACTORS? ▼
You can file a complaint with OSHA online at osha.gov/workers/file-complaint, by calling 1-800-321-OSHA (6742), or by visiting your local OSHA area office. Complaints can be filed confidentially. OSHA is required to respond to all complaints and will prioritize those alleging imminent danger. You are protected from employer retaliation under Section 11(c) of the OSH Act.
What should I do if DUNBAR MECHANICAL CONTRACTORS owes me wages? ▼
If you believe DUNBAR MECHANICAL CONTRACTORS owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $1,155 in back wages owed by this employer across 2 cases.
How does DUNBAR MECHANICAL CONTRACTORS's safety record compare to industry average? ▼
DUNBAR MECHANICAL CONTRACTORS's total OSHA penalty of $152 is below the Construction industry average of $6,657 per employer. The employer has 3 inspections compared to the industry average of 2.0 per employer.

Explore PlainWorker

Construction Industry

All 60,370 employers in this sector
Employers in TN

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

Related Data Sources

Safety Grade on PlainSafetyScore → Salary Data on WageDex → Labor Market on PlainLabor → Workforce Data on PlainEmploy →

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Read our methodology — how this data is sourced, computed, and verified.

Verify with OSHA establishment search →