Construction · San Pedro, CA
Drill Tech Drilling & Shoring INC
According to OSHA enforcement records (2010–2026), Drill Tech Drilling & Shoring INC ranks #96,732 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 4 inspections.
- $250
- OSHA penalties
- 1
- Violations cited
- 4
- OSHA inspections
- #96,732
- of 99,447 penalized employers
Drill Tech Drilling & Shoring INC in San Pedro, CA has been the subject of 4 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $250. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.
The record in one line
OSHA has kept close, sustained watch on Drill Tech Drilling & Shoring INC: 4 inspections in 1 year, several times a year. These inspections resulted in just 1 violation, averaging 0.3 per inspection - fewer than typical. According to OSHA enforcement records, its total current penalty ranks #96,732 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Against the Construction industry average of 2 inspections per employer, this runs moderately above peers (2.0x the sector average) on inspection frequency. For comparison, Preston Construction CO in Johnson City, TN is another construction employer with 2 OSHA inspections on record and $250 in current penalties.
- 0.3
- violations per inspection
- 0.0%
- of violations were serious
- #96,732
- of 99,447 penalized employers
Compliance score
- B OSHA safety compliance: 1 violation across 4 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.
How this employer compares on OSHA penalties
Total current penalty vs the Construction per-employer average
- Drill Tech Drilling & … $250
Drill Tech Drilling & Shoring INC
$250 in penalties
- Construction avg
Construction industry average (per employer)
$6,767 in penalties
What this shows Drill Tech Drilling & Shoring INC runs well below peers (0.04x the sector average) in total OSHA penalties.
Where this penalty ranks nationally
Total current OSHA penalty vs every U.S. employer with a nonzero penalty
$250 Top 3% most affordable more affordable than 97% of 99,447 U.S. employers with a penalty
Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.
Source U.S. Department of Labor, OSHA enforcement extracts · 2026
Does more inspection scrutiny mean more findings?
Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Drill Tech Drilling & Shoring INC.
Drill Tech Drilling & Shoring INC in the Construction enforcement ledger
Among 33,222 Construction employers with OSHA penalties on file, Drill Tech Drilling & Shoring INC ranks #32,195 at $250 current penalty.
How Drill Tech Drilling & Shoring INC Compares
Drill Tech Drilling & Shoring INC's 0.25 violations per inspection compares to the Construction sector average of 3.3 violations per employer.
Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs well below peers (0.04x the sector average).
Enforcement detail
OSHA Inspection History
Total Inspections
4
First Inspection
2013-06-21
Last Inspection
2014-03-27
Inspection Span
1 yr
Violations / Inspection
0.3
Avg Penalty / Inspection
$63
Industry Avg / Inspection
$3,361
What this shows 4 inspections over 1 year, averaging 0.3 violations per visit. That's $63 per inspection vs. the Construction average of $3,361.
Enforcement detail
Violation Breakdown
0
Serious
0.0% of total
0
Willful
0.0% of total
0
Repeat
0.0% of total
1
Other-Than-Serious
100.0% of total
What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.
Enforcement detail
Penalty Analysis
Initial Penalty Assessed
$450
Current Penalty Amount
$250
Penalty Reduction
44.4%
What this shows Penalties were reduced by $200 from the initial assessment of $450. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.
Industry Safety Context: Construction
How Drill Tech Drilling & Shoring INC compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.
| Metric | Drill Tech Drilling & Shoring INC | Industry Avg |
|---|---|---|
| Inspections | 4 | 2.0 |
| Violations | 1 | 3.3 |
| Total Penalty | $250 | $6,767 |
| Avg Penalty per Inspection | $63 | $3,361 |
Nationwide Construction peers with similar penalties or inspection counts
Two OSHA-record peer sets for Drill Tech Drilling & Shoring INC, both outside CA so the neighborhoods are not geographic containment.
Similar current OSHA penalty
Nearest same-sector employers by current assessed penalty ($250 here).
Similar OSHA inspection count
Same-sector employers with a comparable inspection history outside this state (4 inspections here).
Nearby & Similar Employers in Construction
Showing 5 of 61259 other employers tracked in this sector.
Compare Drill Tech Drilling & Shoring INC vs Preston Construction CO side-by-side →
What to do with this record
Use Drill Tech Drilling & Shoring INC's enforcement history as one data point, not the whole picture.
- A single employer's record can look unusual in isolation. Compare Drill Tech Drilling & Shoring INC against Preston Construction CO, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
- See whether Drill Tech Drilling & Shoring INC's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
- Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers
Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.
Frequently Asked Questions
Is Drill Tech Drilling & Shoring INC safe to work at? ▼
How many OSHA violations does Drill Tech Drilling & Shoring INC have? ▼
How many OSHA inspections has Drill Tech Drilling & Shoring INC had? ▼
What is the total penalty amount for Drill Tech Drilling & Shoring INC? ▼
What industry does Drill Tech Drilling & Shoring INC operate in? ▼
Where does Drill Tech Drilling & Shoring INC rank nationally on OSHA penalties? ▼
How does Drill Tech Drilling & Shoring INC's safety record compare to industry average? ▼
Data Sources & Methodology ▼
Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).
Source: OSHA Enforcement Data
Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.
Source: Wage and Hour Division (WHD)
Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.
Employer Matching
Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.