Wholesale Trade · Chicago, IL

Dockside Steel Processing, LLC

According to OSHA enforcement records (2010–2026), Dockside Steel Processing, LLC has a concerning safety record: 28 violations across 6 inspections. See the full breakdown below.

Top 5% by penalty57% serious
$54,197
OSHA penalties
28
Violations cited
6
OSHA inspections
#4,516
of 100,495 penalized employers

Dockside Steel Processing, LLC in Chicago, IL has been the subject of 6 OSHA workplace inspections and 28 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $54,197. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dockside Steel Processing, LLC 6 times over 11 years, roughly once every couple of years. These inspections resulted in 28 violations, averaging 4.7 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top 5% of penalized employers nationally. Of these, 16 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this runs well above peers (3.1x the sector average) on inspection frequency. For comparison, Mercury Plastics INC in City of Industry, CA is another wholesale trade employer with 2 OSHA inspections on record and $54,325 in current penalties.

4.7
violations per inspection
57.1%
of violations were serious
96%
of penalized employers rank lower

How Dockside Steel Processing, LLC compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows Dockside Steel Processing, LLC runs far above peers (6.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$54,197 Bottom 4% least affordable more affordable than 4% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Below this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Below this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). This entry sits in this band. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Dockside Steel Processing, LLC

The federal enforcement record for Dockside Steel Processing, LLC in Chicago, IL includes 6 OSHA inspections and 28 violations, translating to 4.67 violations per inspection. Of those violations, 16 (57.1%) were classified as serious, 0 (0.0%) as willful, and 7 (25.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $117,992 in initial penalties against this employer, later adjusted to a current total of $54,197 - a 54.1% reduction. Average penalty per inspection works out to $9,033. Against the Wholesale Trade industry average of $9,023 per employer, this record runs far above peers (6.0x the sector average).

Inspection activity spans from 2013-02-25 to 2024-07-26, a window of roughly 11 years.

Enforcement detail

OSHA Inspection History

Total Inspections

6

First Inspection

2013-02-25

Last Inspection

2024-07-26

Inspection Span

11 yrs

Violations / Inspection

4.7

Avg Penalty / Inspection

$9,033

Industry Avg / Inspection

$4,678

What this shows 6 inspections over 11 years, averaging 4.7 violations per visit. That's $9,033 per inspection vs. the Wholesale Trade average of $4,678.

Enforcement detail

Violation Breakdown

16

Serious

57.1% of total

0

Willful

0.0% of total

7

Repeat

25.0% of total

5

Other-Than-Serious

17.9% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$117,992

Current Penalty Amount

$54,197

Penalty Reduction

54.1%

What this shows Penalties were reduced by $63,795 from the initial assessment of $117,992. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How Dockside Steel Processing, LLC compares to the Wholesale Trade sector, which has 6,960 employers tracked by PlainWorker.

Metric Dockside Steel Processing, LLC Industry Avg
Inspections 6 1.9
Violations 28 5.4
Total Penalty $54,197 $9,023
Avg Penalty per Inspection $9,033 $4,678

Nearby & Similar Employers in Wholesale Trade

Compare Dockside Steel Processing, LLC vs F.W. Webb (Woburn #55) side-by-side →

Frequently Asked Questions

Is Dockside Steel Processing, LLC safe to work at?
Based on OSHA records, Dockside Steel Processing, LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 28 violations across 6 inspections, including 16 serious violations. Compared to Wholesale Trade industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dockside Steel Processing, LLC have?
Dockside Steel Processing, LLC has 28 OSHA violations on record, including 16 serious, 0 willful, and 7 repeat violations. The total current penalty amount is $54,197.
How many OSHA inspections has Dockside Steel Processing, LLC had?
Dockside Steel Processing, LLC has had 6 OSHA inspections, with the first recorded on 2013-02-25 and the most recent on 2024-07-26. This averages 4.7 violations per inspection.
What is the total penalty amount for Dockside Steel Processing, LLC?
Dockside Steel Processing, LLC has been assessed $54,197 in current OSHA penalties, reduced from an initial assessment of $117,992 (a 54.1% reduction).
Does Dockside Steel Processing, LLC have any serious or willful violations?
Yes. Dockside Steel Processing, LLC has 16 serious violations, and 7 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Dockside Steel Processing, LLC operate in?
Dockside Steel Processing, LLC operates in the Wholesale Trade sector (NAICS code 423510). This industry has 6,960 employers tracked by PlainWorker, with 13,424 total OSHA inspections and $62.80M in cumulative penalties.
How does Dockside Steel Processing, LLC's safety record compare to industry average?
Dockside Steel Processing, LLC's total OSHA penalty of $54,197 is above the Wholesale Trade industry average of $9,023 per employer (6.0x the average). The employer has 6 inspections compared to the industry average of 1.9 per employer. For a direct comparison, Mercury Plastics INC in City of Industry, CA is a similar wholesale trade employer with $54,325 in current penalties.

Explore PlainWorker

What to check next

Dockside Steel Processing, LLC's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 6 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.