PlainWorker
Employers › TN

Manufacturing · Memphis, TN

Dixie Metal Products LLC

According to OSHA enforcement records (2010–2026), Dixie Metal Products LLC ranks #80,356 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Lower half by penalty25% serious
$1,600
OSHA penalties
8
Violations cited
2
OSHA inspections
#80,356
of 99,447 penalized employers

Dixie Metal Products LLC in Memphis, TN has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,600. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dixie Metal Products LLC 2 times across a longer 8-year span, an infrequent cadence. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #80,356 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Advanced Fluid Systems in York, PA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

4.0
violations per inspection
25.0%
of violations were serious
#80,356
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Dixie Metal Products LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Dixie Metal Products LLC runs well below peers (0.10x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,600 Top 19% most affordable more affordable than 81% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Dixie Metal Products LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.39.719.028.437.7OSHA inspectionsViolations citedWAREHOUSE 2000 INC, OSHA inspections: 2 · Violations cited: 34MARSHALL DURBIN COMP…, OSHA inspections: 2 · Violations cited: 16PRODUCERS MEAT & PRO…, OSHA inspections: 2 · Violations cited: 10Vasq Sheetmetal LLC, OSHA inspections: 2 · Violations cited: 8ESTAD STAMPING & MFG…, OSHA inspections: 2 · Violations cited: 21POWERTEX SPORTSWEAR,…, OSHA inspections: 2 · Violations cited: 31CARPENTER CONTRACTOR…, OSHA inspections: 2 · Violations cited: 36KEYSTONE CONSOLIDATE…, OSHA inspections: 2 · Violations cited: 2NOVAGARD SOLUTIONS, …, OSHA inspections: 2 · Violations cited: 2TELLA TOOL & MFG. CO., OSHA inspections: 2 · Violations cited: 7HIGGINS SUPPLY COMPA…, OSHA inspections: 2 · Violations cited: 17PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 5MOTOR CASTINGS COMPANY, OSHA inspections: 2 · Violations cited: 10BOARDMAN, INC., OSHA inspections: 2 · Violations cited: 14PLANET STONE, INC., OSHA inspections: 2 · Violations cited: 9PACIFIC COAST SEAFOOD, OSHA inspections: 2 · Violations cited: 13WELTER FOREST PRODUCTS, OSHA inspections: 2 · Violations cited: 10TECHNICAL POLYMERS, …, OSHA inspections: 2 · Violations cited: 16HILL PHOENIX, INC., OSHA inspections: 2 · Violations cited: 8PROCESSBARRON D/B/A …, OSHA inspections: 2 · Violations cited: 12Dixie Metal Products…, OSHA inspections: 2 · Violations cited: 8
Dixie Metal Products LLC has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Dixie Metal Products LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Dixie Metal Products LLC ranks #30,763 at $1,600 current penalty.

How Dixie Metal Products LLC Compares

Dixie Metal Products LLC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.10x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-10-10

Last Inspection

2022-11-18

Inspection Span

8 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$800

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 8 years, averaging 4.0 violations per visit. That's $800 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

25.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

75.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,600

Current Penalty Amount

$1,600

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Dixie Metal Products LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Dixie Metal Products LLC Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $1,600 $15,763
Avg Penalty per Inspection $800 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Dixie Metal Products LLC, both outside TN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,600 here).

Piedmont Wood Products, INC. $1,600 NC Global Stainless Products INC $1,600 MI Moore Metal Plating Corporation $1,600 LA Sisneros Brothers $1,600 NM

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Warehouse 2000 INC 2 insp. Firebaugh, CA Marshall Durbin Companies 2 insp. Hattiesburg, MS Producers Meat & Provisions, INC. 2 insp. San Diego, CA Vasq Sheetmetal LLC 2 insp. Arlington, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Piedmont Wood Products, INC.
Taylorsville, NC
2 inspections $1,600
Sisneros Brothers
Belen, NM
2 inspections $1,600
Southern Shavings Company, INC.
Cherryville, NC
2 inspections $1,600
Millbrook Reel INC
Pawtucket, RI
2 inspections $1,600
Advanced Fluid Systems
York, PA
0 inspections $0

Compare Dixie Metal Products LLC vs Piedmont Wood Products, INC. side-by-side →

What to do with this record

Use Dixie Metal Products LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Dixie Metal Products LLC against Piedmont Wood Products, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Dixie Metal Products LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Dixie Metal Products LLC safe to work at? ▼
Based on OSHA records, Dixie Metal Products LLC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dixie Metal Products LLC have? ▼
Dixie Metal Products LLC has 8 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,600.
How many OSHA inspections has Dixie Metal Products LLC had? ▼
Dixie Metal Products LLC has had 2 OSHA inspections, with the first recorded on 2014-10-10 and the most recent on 2022-11-18. This averages 4.0 violations per inspection.
What is the total penalty amount for Dixie Metal Products LLC? ▼
Dixie Metal Products LLC has been assessed $1,600 in current OSHA penalties.
Does Dixie Metal Products LLC have any serious or willful violations? ▼
Yes. Dixie Metal Products LLC has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Dixie Metal Products LLC operate in? ▼
Dixie Metal Products LLC operates in the Manufacturing sector (NAICS code 332996). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Dixie Metal Products LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Dixie Metal Products LLC ranks #80,356 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Dixie Metal Products LLC's safety record compare to industry average? ▼
Dixie Metal Products LLC's total OSHA penalty of $1,600 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Advanced Fluid Systems in York, PA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.