Manufacturing · Atlanta, GA

Diversified Metal Fabricators, INC.

According to OSHA enforcement records (2010–2026), Diversified Metal Fabricators, INC. ranks #75,701 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 1 violations across 4 inspections.

Lower half by penalty100% serious
$2,100
OSHA penalties
1
Violations cited
4
OSHA inspections
#75,701
of 99,447 penalized employers

Diversified Metal Fabricators, INC. in Atlanta, GA has been the subject of 4 OSHA workplace inspections and 1 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $2,100. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Diversified Metal Fabricators, INC. 4 times across a longer 11-year span, an infrequent cadence. These inspections resulted in just 1 violation, averaging 0.3 per inspection - fewer than typical. According to OSHA enforcement records, its total current penalty ranks #75,701 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Beaming White LLC in Vancouver, WA is another manufacturing employer with 4 OSHA inspections on record and $2,100 in current penalties.

0.3
violations per inspection
100.0%
of violations were serious
#75,701
of 99,447 penalized employers

Compliance score

B 86/100
  • B OSHA safety compliance: 1 violation across 4 OSHA inspections (0.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Diversified Metal Fabricators, INC. runs well below peers (0.13x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$2,100 Top 24% most affordable more affordable than 76% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Diversified Metal Fabricators, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0010.220.430.740.9OSHA inspectionsViolations citedDENISON PHARMACEUTIC…, OSHA inspections: 4 · Violations cited: 6UNIVERSAL COMPONENT …, OSHA inspections: 4 · Violations cited: 39BROKEN ARROW POWDER …, OSHA inspections: 4 · Violations cited: 35AMERICAN SHOWA, INC., OSHA inspections: 4 · Violations cited: 14FRANKLIN FIBRE-LAMIT…, OSHA inspections: 4 · Violations cited: 12CARE CASKETS INT'L, …, OSHA inspections: 4 · Violations cited: 35NATIONAL DIVERSIFIED…, OSHA inspections: 4 · Violations cited: 9EUROTRANCIATURA U.S.…, OSHA inspections: 4 · Violations cited: 12METALCRAFT OF MAYVIL…, OSHA inspections: 4 · Violations cited: 12CREATE-A-PACK FOODS,…, OSHA inspections: 4 · Violations cited: 9TYSON FOODS, INC., OSHA inspections: 4 · Violations cited: 6SUPERIOR MARINE WAYS…, OSHA inspections: 4 · Violations cited: 12SINCLAIR & RUSH, INC., OSHA inspections: 4 · Violations cited: 10SPUNSTRAND, INC., OSHA inspections: 4 · Violations cited: 18CONSOLIDATED PRINTIN…, OSHA inspections: 4 · Violations cited: 10BRIGGS & STRATTON CO…, OSHA inspections: 4 · Violations cited: 4NORTHEASTERN NONWOVE…, OSHA inspections: 4 · Violations cited: 18COX CONTAINER, LLC, OSHA inspections: 4 · Violations cited: 27NYLOK LLC, OSHA inspections: 4 · Violations cited: 34DENKA PERFORMANCE EL…, OSHA inspections: 4 · Violations cited: 4Diversified Metal Fa…, OSHA inspections: 4 · Violations cited: 1
Diversified Metal Fabricators, INC. has 4 OSHA inspections on record and 1 violation cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Diversified Metal Fabricators, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Diversified Metal Fabricators, INC. is the #29,383 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($2,100).

How Diversified Metal Fabricators, INC. Compares

Diversified Metal Fabricators, INC.'s 0.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.13x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2014-01-16

Last Inspection

2024-11-08

Inspection Span

11 yrs

Violations / Inspection

0.3

Avg Penalty / Inspection

$525

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 11 years, averaging 0.3 violations per visit. That's $525 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$3,500

Current Penalty Amount

$2,100

Penalty Reduction

40.0%

What this shows Penalties were reduced by $1,400 from the initial assessment of $3,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Diversified Metal Fabricators, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Diversified Metal Fabricators, INC. Industry Avg
Inspections 4 2.6
Violations 1 8.0
Total Penalty $2,100 $15,763
Avg Penalty per Inspection $525 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Diversified Metal Fabricators, INC., both outside GA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Diversified Metal Fabricators, INC. vs Betsy & Adam LTD. side-by-side →

What to do with this record

Use Diversified Metal Fabricators, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Diversified Metal Fabricators, INC. against Betsy & Adam LTD., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Diversified Metal Fabricators, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Diversified Metal Fabricators, INC. safe to work at?
Based on OSHA records, Diversified Metal Fabricators, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 1 violations across 4 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Diversified Metal Fabricators, INC. have?
Diversified Metal Fabricators, INC. has 1 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $2,100.
How many OSHA inspections has Diversified Metal Fabricators, INC. had?
Diversified Metal Fabricators, INC. has had 4 OSHA inspections, with the first recorded on 2014-01-16 and the most recent on 2024-11-08. This averages 0.3 violations per inspection.
What is the total penalty amount for Diversified Metal Fabricators, INC.?
Diversified Metal Fabricators, INC. has been assessed $2,100 in current OSHA penalties, reduced from an initial assessment of $3,500 (a 40.0% reduction).
Does Diversified Metal Fabricators, INC. have any serious or willful violations?
Yes. Diversified Metal Fabricators, INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Diversified Metal Fabricators, INC. operate in?
Diversified Metal Fabricators, INC. operates in the Manufacturing sector (NAICS code 336510). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Diversified Metal Fabricators, INC. rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Diversified Metal Fabricators, INC. ranks #75,701 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Diversified Metal Fabricators, INC.'s safety record compare to industry average?
Diversified Metal Fabricators, INC.'s total OSHA penalty of $2,100 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Beaming White LLC in Vancouver, WA is a similar manufacturing employer with $2,100 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.