PlainWorker
Employers › MD

Manufacturing · Rockville, MD

Dimensional Marble & Tile, INC.

According to OSHA enforcement records (2010–2026), Dimensional Marble & Tile, INC. ranks #46,299 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 33 violations across 4 inspections.

Upper half by penalty39% serious
$6,870
OSHA penalties
33
Violations cited
4
OSHA inspections
#46,299
of 99,447 penalized employers

Dimensional Marble & Tile, INC. in Rockville, MD has been the subject of 4 OSHA workplace inspections and 33 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,870. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dimensional Marble & Tile, INC. 4 times over 5 years, roughly once every couple of years. These inspections resulted in 33 violations, averaging 8.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #46,299 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, T.M. Cobb Company in San Bernardino, CA is another manufacturing employer with 2 OSHA inspections on record and $6,870 in current penalties.

8.3
violations per inspection
39.4%
of violations were serious
#46,299
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 33 violations across 4 OSHA inspections (8.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Dimensional Marble & Tile, INC. runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,870 Bottom 47% least affordable more affordable than 47% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Dimensional Marble & Tile, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.00.49.017.526.034.5OSHA inspectionsViolations citedSUGAR CREEK PACKING …, OSHA inspections: 4 · Violations cited: 18MARENGO TOOL & DIE W…, OSHA inspections: 4 · Violations cited: 16AMERICAN CRYSTAL SUGAR, OSHA inspections: 4 · Violations cited: 9ANOPLATE CORPORATION, OSHA inspections: 4 · Violations cited: 26TITAN MODULAR SYSTEM…, OSHA inspections: 4 · Violations cited: 25BALLYMORE COMPANY, I…, OSHA inspections: 4 · Violations cited: 17AROOSTOOK TRUSSES, I…, OSHA inspections: 4 · Violations cited: 8DRAINAGE PRODUCTS, I…, OSHA inspections: 4 · Violations cited: 14WVA MANUFACTURING, LLC, OSHA inspections: 4 · Violations cited: 9MICROFLEX, INC., OSHA inspections: 4 · Violations cited: 7G & V MACHINE CO., I…, OSHA inspections: 4 · Violations cited: 7FISCHER USA STAINLES…, OSHA inspections: 4 · Violations cited: 12MAGNODE CORPORATION, OSHA inspections: 4 · Violations cited: 9RYERSON INC., OSHA inspections: 4 · Violations cited: 9ROADRUNNER PHARMACY,…, OSHA inspections: 4 · Violations cited: 12ARCONIC US LLC, OSHA inspections: 4 · Violations cited: 7JOHN DEERE OTTUMWA W…, OSHA inspections: 4 · Violations cited: 5FINELINE INDUSTRIES,…, OSHA inspections: 4 · Violations cited: 24AER MANUFACTURING, L…, OSHA inspections: 4 · Violations cited: 2GKN AEROSPACE, OSHA inspections: 4 · Violations cited: 7Dimensional Marble &…, OSHA inspections: 4 · Violations cited: 33
Dimensional Marble & Tile, INC. has 4 OSHA inspections on record and 33 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Dimensional Marble & Tile, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Dimensional Marble & Tile, INC. is the #20,022 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($6,870).

How Dimensional Marble & Tile, INC. Compares

Dimensional Marble & Tile, INC.'s 8.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2016-08-31

Last Inspection

2022-01-04

Inspection Span

5 yrs

Violations / Inspection

8.3

Avg Penalty / Inspection

$1,718

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 5 years, averaging 8.3 violations per visit. That's $1,718 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

39.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

20

Other-Than-Serious

60.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,523

Current Penalty Amount

$6,870

Penalty Reduction

8.7%

What this shows Penalties were reduced by $653 from the initial assessment of $7,523. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Dimensional Marble & Tile, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Dimensional Marble & Tile, INC. Industry Avg
Inspections 4 2.6
Violations 33 8.0
Total Penalty $6,870 $15,763
Avg Penalty per Inspection $1,718 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Dimensional Marble & Tile, INC., both outside MD so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,870 here).

T.M. Cobb Company $6,870 CA T. a. Pelsue Company $6,873 CO I-30 Pallet CO., INC. $6,873 TX Charles Schillinger CO. $6,873 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Sugar Creek Packing CO. 4 insp. Washington Court House, OH Marengo Tool & Die Works, INC. 4 insp. Marengo, IL American Crystal Sugar 4 insp. Sidney, MT Anoplate Corporation 4 insp. Syracuse, NY

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

T.M. Cobb Company
San Bernardino, CA
2 inspections $6,870
Southeast Duct Specialist, Inc.
Hollywood, FL
0 inspections $0
T. a. Pelsue Company
Englewood, CO
2 inspections $6,873
I-30 Pallet CO., INC.
Sulphur Springs, TX
2 inspections $6,873
Charles Schillinger CO.
Bensalem, PA
2 inspections $6,873

Compare Dimensional Marble & Tile, INC. vs T.M. Cobb Company side-by-side →

What to do with this record

Use Dimensional Marble & Tile, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Dimensional Marble & Tile, INC. against T.M. Cobb Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Dimensional Marble & Tile, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Dimensional Marble & Tile, INC. safe to work at? ▼
Based on OSHA records, Dimensional Marble & Tile, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 33 violations across 4 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dimensional Marble & Tile, INC. have? ▼
Dimensional Marble & Tile, INC. has 33 OSHA violations on record, including 13 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,870.
How many OSHA inspections has Dimensional Marble & Tile, INC. had? ▼
Dimensional Marble & Tile, INC. has had 4 OSHA inspections, with the first recorded on 2016-08-31 and the most recent on 2022-01-04. This averages 8.3 violations per inspection.
What is the total penalty amount for Dimensional Marble & Tile, INC.? ▼
Dimensional Marble & Tile, INC. has been assessed $6,870 in current OSHA penalties, reduced from an initial assessment of $7,523 (a 8.7% reduction).
Does Dimensional Marble & Tile, INC. have any serious or willful violations? ▼
Yes. Dimensional Marble & Tile, INC. has 13 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Dimensional Marble & Tile, INC. operate in? ▼
Dimensional Marble & Tile, INC. operates in the Manufacturing sector (NAICS code 327991). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Dimensional Marble & Tile, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Dimensional Marble & Tile, INC. ranks #46,299 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Dimensional Marble & Tile, INC.'s safety record compare to industry average? ▼
Dimensional Marble & Tile, INC.'s total OSHA penalty of $6,870 is below the Manufacturing industry average of $15,763 per employer. The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, T.M. Cobb Company in San Bernardino, CA is a similar manufacturing employer with $6,870 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.