PlainWorker
Employers › MI

Manufacturing · Imlay City, MI

Dietech Tool & Manufacturing INC

According to OSHA enforcement records (2010–2026), Dietech Tool & Manufacturing INC ranks #49,388 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 20 violations across 5 inspections.

Upper half by penalty50% serious
$6,150
OSHA penalties
20
Violations cited
5
OSHA inspections
#49,388
of 99,447 penalized employers

Dietech Tool & Manufacturing INC in Imlay City, MI has been the subject of 5 OSHA workplace inspections and 20 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $6,150. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dietech Tool & Manufacturing INC 5 times across a longer 12-year span, an infrequent cadence. These inspections resulted in 20 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #49,388 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.9x the sector average) on inspection frequency. For comparison, Paragon Tube Corporation in Fort Wayne, IN is another manufacturing employer with 2 OSHA inspections on record and $6,150 in current penalties.

4.0
violations per inspection
50.0%
of violations were serious
#49,388
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 20 violations across 5 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Dietech Tool & Manufacturing INC runs moderately below peers (0.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$6,150 Top 50% most affordable more affordable than 50% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Dietech Tool & Manufacturing INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both5.05.055.05.0013.927.841.755.5OSHA inspectionsViolations citedMB CONSULTANTS, LTD.…, OSHA inspections: 5 · Violations cited: 10FRESH MARK INC., OSHA inspections: 5 · Violations cited: 6CLEARWATER SPAS, OSHA inspections: 5 · Violations cited: 27ABBYLAND PORK PACK, …, OSHA inspections: 5 · Violations cited: 17KNEAD DOUGH BAKING C…, OSHA inspections: 5 · Violations cited: 7TUCKERMAN STEEL FABR…, OSHA inspections: 5 · Violations cited: 24REDWOOD MATERIALS INC, OSHA inspections: 5 · Violations cited: 3NYLON CORPORATION OF…, OSHA inspections: 5 · Violations cited: 4PITA PAN, OSHA inspections: 5 · Violations cited: 5EMPIRE METAL PRODUCT…, OSHA inspections: 5 · Violations cited: 16GRAPHIC PACKAGING IN…, OSHA inspections: 5 · Violations cited: 2ACTION INDUSTRIES, I…, OSHA inspections: 5 · Violations cited: 6AVALON PRECISION CAS…, OSHA inspections: 5 · Violations cited: 40TYK AMERICA, INC., OSHA inspections: 5 · Violations cited: 25FRANKLIN FOODS, INC., OSHA inspections: 5 · Violations cited: 20STEELER INC, OSHA inspections: 5 · Violations cited: 53DOOR COUNTY COOPERAT…, OSHA inspections: 5 · Violations cited: 34MORRIS BEAN & COMPANY, OSHA inspections: 5 · Violations cited: 22VENTRA SALEM, LLC, OSHA inspections: 5 · Violations cited: 10BRIGHTPET NUTRITION …, OSHA inspections: 5 · Violations cited: 10Dietech Tool & Manuf…, OSHA inspections: 5 · Violations cited: 20
Dietech Tool & Manufacturing INC has 5 OSHA inspections on record and 20 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Dietech Tool & Manufacturing INC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Dietech Tool & Manufacturing INC ranks #21,117 at $6,150 current penalty.

How Dietech Tool & Manufacturing INC Compares

Dietech Tool & Manufacturing INC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

5

First Inspection

2014-10-28

Last Inspection

2026-06-29

Inspection Span

12 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$1,230

Industry Avg / Inspection

$6,093

What this shows 5 inspections over 12 years, averaging 4.0 violations per visit. That's $1,230 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

10

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,100

Current Penalty Amount

$6,150

Penalty Reduction

24.1%

What this shows Penalties were reduced by $1,950 from the initial assessment of $8,100. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Dietech Tool & Manufacturing INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Dietech Tool & Manufacturing INC Industry Avg
Inspections 5 2.6
Violations 20 8.0
Total Penalty $6,150 $15,763
Avg Penalty per Inspection $1,230 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Dietech Tool & Manufacturing INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($6,150 here).

Galaxy Desserts, INC. $6,150 CA Paragon Tube Corporation $6,150 IN Tennessee Sheet Metal, INC. $6,150 TN Wrought Washer MFG., INC. $6,150 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (5 inspections here).

MB Consultants, LTD. (DBA Murray's Chicken) 5 insp. South Fallsburg, NY Fresh Mark INC. 5 insp. Canton, OH Clearwater Spas 5 insp. Woodinville, WA Abbyland Pork Pack, INC. 5 insp. Curtiss, WI

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Galaxy Desserts, INC.
Richmond, CA
2 inspections $6,150
Valley Steel Company
Saginaw, MI
3 inspections $6,150
Profile Industrial Packaging Corporation DBA Profile Films
Grand Rapids, MI
2 inspections $6,150
Lanzen-Mancelona
Mancelona, MI
4 inspections $6,150
Paragon Tube Corporation
Fort Wayne, IN
2 inspections $6,150

Compare Dietech Tool & Manufacturing INC vs Galaxy Desserts, INC. side-by-side →

What to do with this record

Use Dietech Tool & Manufacturing INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Dietech Tool & Manufacturing INC against Galaxy Desserts, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Dietech Tool & Manufacturing INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Dietech Tool & Manufacturing INC safe to work at? ▼
Based on OSHA records, Dietech Tool & Manufacturing INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 20 violations across 5 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dietech Tool & Manufacturing INC have? ▼
Dietech Tool & Manufacturing INC has 20 OSHA violations on record, including 10 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $6,150.
How many OSHA inspections has Dietech Tool & Manufacturing INC had? ▼
Dietech Tool & Manufacturing INC has had 5 OSHA inspections, with the first recorded on 2014-10-28 and the most recent on 2026-06-29. This averages 4.0 violations per inspection.
What is the total penalty amount for Dietech Tool & Manufacturing INC? ▼
Dietech Tool & Manufacturing INC has been assessed $6,150 in current OSHA penalties, reduced from an initial assessment of $8,100 (a 24.1% reduction).
Does Dietech Tool & Manufacturing INC have any serious or willful violations? ▼
Yes. Dietech Tool & Manufacturing INC has 10 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Dietech Tool & Manufacturing INC operate in? ▼
Dietech Tool & Manufacturing INC operates in the Manufacturing sector (NAICS code 336370). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Dietech Tool & Manufacturing INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Dietech Tool & Manufacturing INC ranks #49,388 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Dietech Tool & Manufacturing INC's safety record compare to industry average? ▼
Dietech Tool & Manufacturing INC's total OSHA penalty of $6,150 is below the Manufacturing industry average of $15,763 per employer. The employer has 5 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Paragon Tube Corporation in Fort Wayne, IN is a similar manufacturing employer with $6,150 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 5 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.