PlainWorker
Employers › MI

Manufacturing · Dexter, MI

Diecutting Service INC

According to OSHA enforcement records (2010–2026), Diecutting Service INC ranks #77,549 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 19 violations across 2 inspections.

Lower half by penalty58% serious
$1,900
OSHA penalties
19
Violations cited
2
OSHA inspections
#77,549
of 99,447 penalized employers

Diecutting Service INC in Dexter, MI has been the subject of 2 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $1,900. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Diecutting Service INC 2 times over 3 years, roughly once every couple of years. These inspections resulted in 19 violations, averaging 9.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #77,549 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 11 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Coblentz Sawmill in Grandin, MO is another manufacturing employer with 2 OSHA inspections on record and $1,900 in current penalties.

9.5
violations per inspection
57.9%
of violations were serious
#77,549
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 19 violations across 2 OSHA inspections (9.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Diecutting Service INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Diecutting Service INC runs well below peers (0.12x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$1,900 Top 22% most affordable more affordable than 78% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Diecutting Service INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.010.821.532.243.0OSHA inspectionsViolations citedORBITAL ATK INC., OSHA inspections: 2 · Violations cited: 12NEXHAUL, INC., OSHA inspections: 2 · Violations cited: 32BELGIOIOSO CHEESE, I…, OSHA inspections: 2 · Violations cited: 18LIPPERT COMPONENTS, …, OSHA inspections: 2 · Violations cited: 8SEMICONDUCTOR COMPON…, OSHA inspections: 2 · Violations cited: 3COLEPAK, INC., OSHA inspections: 2 · Violations cited: 8SINCLAIR CASPER REFI…, OSHA inspections: 2 · Violations cited: 41RENO REFRACTORIES, I…, OSHA inspections: 2 · Violations cited: 9MERCK, SHARPE & DOHM…, OSHA inspections: 2 · Violations cited: 2SIOUX CHIEF MANUFACT…, OSHA inspections: 2 · Violations cited: 4ROM CORPORATION, OSHA inspections: 2 · Violations cited: 8S & H CABINETS & MAN…, OSHA inspections: 2 · Violations cited: 7EMECO INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 25DOUBLE 'R' SHARPENING, OSHA inspections: 2 · Violations cited: 20TWIN MARQUIS, INC., OSHA inspections: 2 · Violations cited: 2JOHNSTOWN FEED MILL,…, OSHA inspections: 2 · Violations cited: 25GROVE INDUSTRIES INC, OSHA inspections: 2 · Violations cited: 23S-5! MANUFACTURING, OSHA inspections: 2 · Violations cited: 5INTERNATIONAL PAPER …, OSHA inspections: 2 · Violations cited: 2TRIAD METAL PRODUCTS…, OSHA inspections: 2 · Violations cited: 11Diecutting Service INC, OSHA inspections: 2 · Violations cited: 19
Diecutting Service INC has 2 OSHA inspections on record and 19 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Diecutting Service INC in the Manufacturing enforcement ledger

Manufacturing sector: Diecutting Service INC is the #29,981 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($1,900).

How Diecutting Service INC Compares

Diecutting Service INC's 9.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.12x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-11-18

Last Inspection

2017-02-14

Inspection Span

3 yrs

Violations / Inspection

9.5

Avg Penalty / Inspection

$950

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 3 years, averaging 9.5 violations per visit. That's $950 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

11

Serious

57.9% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

8

Other-Than-Serious

42.1% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$1,900

Current Penalty Amount

$1,900

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Diecutting Service INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Diecutting Service INC Industry Avg
Inspections 2 2.6
Violations 19 8.0
Total Penalty $1,900 $15,763
Avg Penalty per Inspection $950 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Diecutting Service INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($1,900 here).

Coblentz Sawmill $1,900 MO Engineered Recycling Company, LLC $1,900 NC Clarkdietrich Building Systems $1,900 OH Eurosport Daytona, INC. $1,900 FL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Orbital Atk INC. 2 insp. Independence, MO Nexhaul, INC. 2 insp. Rocky Mount, VA Belgioioso Cheese, INC. 2 insp. Appleton, WI Lippert Components, INC. 2 insp. Nampa, ID

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Coblentz Sawmill
Grandin, MO
2 inspections $1,900
Engineered Recycling Company, LLC
Charlotte, NC
2 inspections $1,900
A&G Associates, LLC. Dbatrigon Metal Products INC
Livonia, MI
2 inspections $1,900
Clarkdietrich Building Systems
Warren, OH
2 inspections $1,900
Eurosport Daytona, INC.
Ormond Beach, FL
3 inspections $1,900

Compare Diecutting Service INC vs Coblentz Sawmill side-by-side →

What to do with this record

Use Diecutting Service INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Diecutting Service INC against Coblentz Sawmill, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Diecutting Service INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Diecutting Service INC safe to work at? ▼
Based on OSHA records, Diecutting Service INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 2 inspections, including 11 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Diecutting Service INC have? ▼
Diecutting Service INC has 19 OSHA violations on record, including 11 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $1,900.
How many OSHA inspections has Diecutting Service INC had? ▼
Diecutting Service INC has had 2 OSHA inspections, with the first recorded on 2013-11-18 and the most recent on 2017-02-14. This averages 9.5 violations per inspection.
What is the total penalty amount for Diecutting Service INC? ▼
Diecutting Service INC has been assessed $1,900 in current OSHA penalties.
Does Diecutting Service INC have any serious or willful violations? ▼
Yes. Diecutting Service INC has 11 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Diecutting Service INC operate in? ▼
Diecutting Service INC operates in the Manufacturing sector (NAICS code 322299). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Diecutting Service INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Diecutting Service INC ranks #77,549 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Diecutting Service INC's safety record compare to industry average? ▼
Diecutting Service INC's total OSHA penalty of $1,900 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Coblentz Sawmill in Grandin, MO is a similar manufacturing employer with $1,900 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.