PlainWorker
Employers › GA

Manufacturing · Carrollton, GA

Die-Tech Industries, INC.

According to OSHA enforcement records (2010–2026), Die-Tech Industries, INC. ranks #4,818 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 11 violations across 5 inspections.

Top 5% by penalty82% serious
$52,110
OSHA penalties
11
Violations cited
5
OSHA inspections
#4,818
of 99,447 penalized employers

Die-Tech Industries, INC. in Carrollton, GA has been the subject of 5 OSHA workplace inspections and 11 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $52,110. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Die-Tech Industries, INC. 5 times over 9 years, roughly once every couple of years. These inspections resulted in 11 violations, averaging 2.2 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #4,818 of 99,447 penalized U.S. employers (the top 5% of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.9x the sector average) on inspection frequency. For comparison, Durez Corporation in Kenton, OH is another manufacturing employer with 5 OSHA inspections on record and $52,138 in current penalties.

2.2
violations per inspection
81.8%
of violations were serious
#4,818
of 99,447 penalized employers

Compliance score

D 58/100
  • D OSHA safety compliance: 11 violations across 5 OSHA inspections (2.2 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Die-Tech Industries, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Die-Tech Industries, INC. runs well above peers (3.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$52,110 Bottom 5% least affordable more affordable than 5% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). This entry sits in this band. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Die-Tech Industries, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both5.05.055.05.00.016.332.548.765.0OSHA inspectionsViolations citedDYNAMIC TOOL CO., INC., OSHA inspections: 5 · Violations cited: 62SPRAY PRODUCTS CORPO…, OSHA inspections: 5 · Violations cited: 31CARLSON TOOL & MANUF…, OSHA inspections: 5 · Violations cited: 10KNOWLTON MANUFACTURI…, OSHA inspections: 5 · Violations cited: 26CHANNELLOCK, INC., OSHA inspections: 5 · Violations cited: 16LYON SHIPYARD, OSHA inspections: 5 · Violations cited: 10CLEARWATER PAPER COR…, OSHA inspections: 5 · Violations cited: 24TECHO-BLOC INCORPORA…, OSHA inspections: 5 · Violations cited: 19TENNECO INC., OSHA inspections: 5 · Violations cited: 8EOS ENERGY STORAGE, OSHA inspections: 5 · Violations cited: 5CAN-ONE (USA), INC., OSHA inspections: 5 · Violations cited: 7LEACHGARNER, INC., OSHA inspections: 5 · Violations cited: 3ALLCAST, LLC, OSHA inspections: 5 · Violations cited: 6STANDARD IRON, INC., OSHA inspections: 5 · Violations cited: 9DUVINAGE LLC, OSHA inspections: 5 · Violations cited: 47LEPRINO FOODS COMPANY, OSHA inspections: 5 · Violations cited: 5MATHESON TRI-GAS INC, OSHA inspections: 5 · Violations cited: 16SANDERSON PIPE CORPO…, OSHA inspections: 5 · Violations cited: 12ARICA VESSEL LLC, OSHA inspections: 5 · Violations cited: 9DAKKOTA INTEGRATED S…, OSHA inspections: 5 · Violations cited: 5Die-Tech Industries,…, OSHA inspections: 5 · Violations cited: 11
Die-Tech Industries, INC. has 5 OSHA inspections on record and 11 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Die-Tech Industries, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Die-Tech Industries, INC. is the #2,458 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($52,110).

How Die-Tech Industries, INC. Compares

Die-Tech Industries, INC.'s 2.20 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (3.3x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

5

First Inspection

2014-05-02

Last Inspection

2023-08-09

Inspection Span

9 yrs

Violations / Inspection

2.2

Avg Penalty / Inspection

$10,422

Industry Avg / Inspection

$6,093

What this shows 5 inspections over 9 years, averaging 2.2 violations per visit. That's $10,422 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

81.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

18.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$71,607

Current Penalty Amount

$52,110

Penalty Reduction

27.2%

What this shows Penalties were reduced by $19,497 from the initial assessment of $71,607. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Die-Tech Industries, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Die-Tech Industries, INC. Industry Avg
Inspections 5 2.6
Violations 11 8.0
Total Penalty $52,110 $15,763
Avg Penalty per Inspection $10,422 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Die-Tech Industries, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($52,110 here).

Cornerstone Chemical Company, LLC $52,099 LA Durez Corporation $52,138 OH Omaha Standard Palfinger $52,080 IA Rotex Global, LLC $52,075 OH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (5 inspections here).

Dynamic Tool CO., INC. 5 insp. El Paso, TX Spray Products Corporation 5 insp. Plymouth Meeting, PA Carlson Tool & Manufacturing CORP. 5 insp. Mequon, WI Knowlton Manufacturing CO., INC. 5 insp. Cincinnati, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Cornerstone Chemical Company, LLC
Westwego, LA
2 inspections $52,099
Durez Corporation
Kenton, OH
5 inspections $52,138
Omaha Standard Palfinger
Council Bluffs, IA
6 inspections $52,080
Rotex Global, LLC
Cincinnati, OH
6 inspections $52,075
Morin Corporation
Bristol, CT
5 inspections $52,150

Compare Die-Tech Industries, INC. vs Cornerstone Chemical Company, LLC side-by-side →

What to do with this record

Use Die-Tech Industries, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Die-Tech Industries, INC. against Cornerstone Chemical Company, LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Die-Tech Industries, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Die-Tech Industries, INC. safe to work at? ▼
Based on OSHA records, Die-Tech Industries, INC.'s workplace safety record is mixed, with some compliance concerns. The employer has 11 violations across 5 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Die-Tech Industries, INC. have? ▼
Die-Tech Industries, INC. has 11 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $52,110.
How many OSHA inspections has Die-Tech Industries, INC. had? ▼
Die-Tech Industries, INC. has had 5 OSHA inspections, with the first recorded on 2014-05-02 and the most recent on 2023-08-09. This averages 2.2 violations per inspection.
What is the total penalty amount for Die-Tech Industries, INC.? ▼
Die-Tech Industries, INC. has been assessed $52,110 in current OSHA penalties, reduced from an initial assessment of $71,607 (a 27.2% reduction).
Does Die-Tech Industries, INC. have any serious or willful violations? ▼
Yes. Die-Tech Industries, INC. has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Die-Tech Industries, INC. operate in? ▼
Die-Tech Industries, INC. operates in the Manufacturing sector (NAICS code 336370). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Die-Tech Industries, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Die-Tech Industries, INC. ranks #4,818 (the top 5% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Die-Tech Industries, INC.'s safety record compare to industry average? ▼
Die-Tech Industries, INC.'s total OSHA penalty of $52,110 is above the Manufacturing industry average of $15,763 per employer (3.3x the average). The employer has 5 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Durez Corporation in Kenton, OH is a similar manufacturing employer with $52,138 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 5 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.