Manufacturing · Plaquemine, LA

Diamond Plastics Corporation

According to OSHA enforcement records (2010–2026), Diamond Plastics Corporation ranks #15,450 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 4 inspections.

Top 25% by penalty71% serious
$22,286
OSHA penalties
7
Violations cited
4
OSHA inspections
#15,450
of 99,447 penalized employers

Diamond Plastics Corporation in Plaquemine, LA has been the subject of 4 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,286. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Diamond Plastics Corporation 4 times over 3 years, roughly annually. These inspections resulted in 7 violations, averaging 1.8 per inspection. According to OSHA enforcement records, its total current penalty ranks #15,450 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Pilgrim's Pride Corporation in Athens, GA is another manufacturing employer with 4 OSHA inspections on record and $22,276 in current penalties.

1.8
violations per inspection
71.4%
of violations were serious
#15,450
of 99,447 penalized employers

Compliance score

C 65/100
  • C OSHA safety compliance: 7 violations across 4 OSHA inspections (1.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Diamond Plastics Corporation compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Diamond Plastics Corporation runs moderately above peers (1.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,286 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Diamond Plastics Corporation.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.02.112.322.532.742.9OSHA inspectionsViolations citedFALLS STAMPING & WEL…, OSHA inspections: 4 · Violations cited: 22GREAT DAY IMPROVEMEN…, OSHA inspections: 4 · Violations cited: 23THORWORKS INDUSTRIES…, OSHA inspections: 4 · Violations cited: 22SANTINI FOODS, INC., OSHA inspections: 4 · Violations cited: 8BLOOMER MACHINE & FA…, OSHA inspections: 4 · Violations cited: 17TRINITY FABRICATORS,…, OSHA inspections: 4 · Violations cited: 5PINNACLE MANUFACTURI…, OSHA inspections: 4 · Violations cited: 16METAL & WIRE PRODUCT…, OSHA inspections: 4 · Violations cited: 29METRO STEEL & PIPE S…, OSHA inspections: 4 · Violations cited: 11NATUREX INC, OSHA inspections: 4 · Violations cited: 20GENERAL ENGINES COMP…, OSHA inspections: 4 · Violations cited: 10AEROJET-GENERAL CORP…, OSHA inspections: 4 · Violations cited: 41NORKOL CONVERTING CO…, OSHA inspections: 4 · Violations cited: 17HOFFMASTER, OSHA inspections: 4 · Violations cited: 11VTI ARCHITECTURAL PR…, OSHA inspections: 4 · Violations cited: 11THE GOODYEAR TIRE & …, OSHA inspections: 4 · Violations cited: 17SYNERGY FLAVORS, INC., OSHA inspections: 4 · Violations cited: 23MAUGUS MANUFACTURING…, OSHA inspections: 4 · Violations cited: 9CHOBANI, LLC, OSHA inspections: 4 · Violations cited: 4TALENTI GELATO, LLC., OSHA inspections: 4 · Violations cited: 6Diamond Plastics Cor…, OSHA inspections: 4 · Violations cited: 7
Diamond Plastics Corporation has 4 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Diamond Plastics Corporation in the Manufacturing enforcement ledger

Manufacturing sector: Diamond Plastics Corporation is the #7,532 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($22,286).

How Diamond Plastics Corporation Compares

Diamond Plastics Corporation's 1.75 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (1.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2016-06-08

Last Inspection

2019-10-16

Inspection Span

3 yrs

Violations / Inspection

1.8

Avg Penalty / Inspection

$5,572

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 3 years, averaging 1.8 violations per visit. That's $5,572 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

71.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

28.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$58,350

Current Penalty Amount

$22,286

Penalty Reduction

61.8%

What this shows Penalties were reduced by $36,064 from the initial assessment of $58,350. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Diamond Plastics Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Diamond Plastics Corporation Industry Avg
Inspections 4 2.6
Violations 7 8.0
Total Penalty $22,286 $15,763
Avg Penalty per Inspection $5,572 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Diamond Plastics Corporation, both outside LA so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Diamond Plastics Corporation vs First Capitol Baking Company side-by-side →

What to do with this record

Use Diamond Plastics Corporation's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Diamond Plastics Corporation against First Capitol Baking Company, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Diamond Plastics Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Diamond Plastics Corporation safe to work at?
Based on OSHA records, Diamond Plastics Corporation's workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 4 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Diamond Plastics Corporation have?
Diamond Plastics Corporation has 7 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $22,286.
How many OSHA inspections has Diamond Plastics Corporation had?
Diamond Plastics Corporation has had 4 OSHA inspections, with the first recorded on 2016-06-08 and the most recent on 2019-10-16. This averages 1.8 violations per inspection.
What is the total penalty amount for Diamond Plastics Corporation?
Diamond Plastics Corporation has been assessed $22,286 in current OSHA penalties, reduced from an initial assessment of $58,350 (a 61.8% reduction).
Does Diamond Plastics Corporation have any serious or willful violations?
Yes. Diamond Plastics Corporation has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Diamond Plastics Corporation operate in?
Diamond Plastics Corporation operates in the Manufacturing sector (NAICS code 326122). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Diamond Plastics Corporation rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Diamond Plastics Corporation ranks #15,450 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Diamond Plastics Corporation's safety record compare to industry average?
Diamond Plastics Corporation's total OSHA penalty of $22,286 is above the Manufacturing industry average of $15,763 per employer (1.4x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Pilgrim's Pride Corporation in Athens, GA is a similar manufacturing employer with $22,276 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.