PlainWorker
Employers › MO

Manufacturing · Lebanon, MO

Detroit Tool Metal Products

According to OSHA enforcement records (2010–2026), Detroit Tool Metal Products ranks #9,329 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 5 violations across 4 inspections.

Top 10% by penalty100% serious
$32,724
OSHA penalties
5
Violations cited
4
OSHA inspections
#9,329
of 99,447 penalized employers

Detroit Tool Metal Products in Lebanon, MO has been the subject of 4 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $32,724. The employer also has 1 Wage and Hour Division (WHD) case on record, covering Fair Labor Standards Act enforcement. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has kept close, sustained watch on Detroit Tool Metal Products: 4 inspections in 1 year, several times a year. These inspections resulted in 5 violations, averaging 1.3 per inspection. According to OSHA enforcement records, its total current penalty ranks #9,329 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $0 in back wages owed to an undisclosed number of workers. For comparison, J.F. Fashion in Los Angeles, CA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

1.3
violations per inspection
100.0%
of violations were serious
#9,329
of 99,447 penalized employers
$0
in back wages recovered

Compliance score

B 82/100
  • C OSHA safety compliance: 5 violations across 4 OSHA inspections (1.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
  • A Wage & hour compliance: $0 in back wages owed across 1 WHD case ($0 per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.
Open my watchlist

How Detroit Tool Metal Products compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Detroit Tool Metal Products runs well above peers (2.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$32,724 Bottom 9% least affordable more affordable than 9% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). This entry sits in this band. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Detroit Tool Metal Products.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.01.410.21927.836.6OSHA inspectionsViolations citedHOEGANAES CORP, OSHA inspections: 4 · Violations cited: 35ARKAL AUTOMOTIVE USA…, OSHA inspections: 4 · Violations cited: 20NELLSON NUTRACEUTICA…, OSHA inspections: 4 · Violations cited: 10COFFIN TURBO PUMP INC, OSHA inspections: 4 · Violations cited: 24TEMTROL, INC., OSHA inspections: 4 · Violations cited: 14ECHO LAKE FOODS INC., OSHA inspections: 4 · Violations cited: 17JENSEN PRECAST, OSHA inspections: 4 · Violations cited: 8CURTIS PACKAGING COR…, OSHA inspections: 4 · Violations cited: 12OAKHURST INDUSTRIES,…, OSHA inspections: 4 · Violations cited: 14RICELAND FOODS, INC., OSHA inspections: 4 · Violations cited: 3DURABLE PRODUCTS INC, OSHA inspections: 4 · Violations cited: 31LOGAN MACHINE COMPANY, OSHA inspections: 4 · Violations cited: 24LASER FABRICATION & …, OSHA inspections: 4 · Violations cited: 19CORRY CONTRACT, INC., OSHA inspections: 4 · Violations cited: 29SCOUGAL RUBBER CORP, OSHA inspections: 4 · Violations cited: 27WILD GARLIC KITCHEN …, OSHA inspections: 4 · Violations cited: 17OWL'S HEAD ALLOYS, I…, OSHA inspections: 4 · Violations cited: 22PROOF RESEARCH, INC., OSHA inspections: 4 · Violations cited: 7SCHREIBER FOODS, INC., OSHA inspections: 4 · Violations cited: 4CNH INDUSTRIAL AMERI…, OSHA inspections: 4 · Violations cited: 4Detroit Tool Metal P…, OSHA inspections: 4 · Violations cited: 5
Detroit Tool Metal Products has 4 OSHA inspections on record and 5 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Detroit Tool Metal Products in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Detroit Tool Metal Products ranks #4,654 at $32,724 current penalty.

Combined federal exposure here: $32,724 OSHA penalties plus $0 WHD back wages (0.0% of the combined total is wage recovery).

How Detroit Tool Metal Products Compares

Detroit Tool Metal Products's 1.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well above peers (2.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2024-02-06

Last Inspection

2024-05-06

Inspection Span

1 yr

Violations / Inspection

1.3

Avg Penalty / Inspection

$8,181

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 1 year, averaging 1.3 violations per visit. That's $8,181 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$43,785

Current Penalty Amount

$32,724

Penalty Reduction

25.3%

Combined Impact (OSHA + WHD)

$32,724

What this shows Penalties were reduced by $11,061 from the initial assessment of $43,785. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$0
Employees Affected
0
WHD Violations
0

Industry Safety Context: Manufacturing

How Detroit Tool Metal Products compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Detroit Tool Metal Products Industry Avg
Inspections 4 2.6
Violations 5 8.0
Total Penalty $32,724 $15,763
Avg Penalty per Inspection $8,181 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Detroit Tool Metal Products, both outside MO so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($32,724 here).

Amadas Coach $32,725 VA Oeg Building Materials, INC. $32,711 NJ Morris Bean & Company $32,742 OH Alleguard, LLC. $32,705 OH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Hoeganaes CORP 4 insp. Gallatin, TN Arkal Automotive USA INC. 4 insp. Auburn, AL Nellson Nutraceutical LLC 4 insp. Irwindale, CA Coffin Turbo Pump INC 4 insp. Englewood, NJ

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Amadas Coach
Suffolk, VA
2 inspections $32,725
Oeg Building Materials, INC.
Sayreville, NJ
5 inspections $32,711
Morris Bean & Company
Yellow Springs, OH
5 inspections $32,742
Alleguard, LLC.
Lancaster, OH
3 inspections $32,705
J.F. Fashion
Los Angeles, CA
0 inspections $0

Compare Detroit Tool Metal Products vs Amadas Coach side-by-side →

What to do with this record

Use Detroit Tool Metal Products's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Detroit Tool Metal Products against Amadas Coach, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Detroit Tool Metal Products's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Detroit Tool Metal Products also carries $0 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Detroit Tool Metal Products safe to work at? ▼
Based on OSHA records, Detroit Tool Metal Products's workplace safety record is mixed, with some compliance concerns. The employer has 5 violations across 4 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Detroit Tool Metal Products have? ▼
Detroit Tool Metal Products has 5 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $32,724.
How many OSHA inspections has Detroit Tool Metal Products had? ▼
Detroit Tool Metal Products has had 4 OSHA inspections, with the first recorded on 2024-02-06 and the most recent on 2024-05-06. This averages 1.3 violations per inspection.
What is the total penalty amount for Detroit Tool Metal Products? ▼
Detroit Tool Metal Products has been assessed $32,724 in current OSHA penalties, reduced from an initial assessment of $43,785 (a 25.3% reduction). Additionally, $0 in back wages were owed through WHD enforcement.
Does Detroit Tool Metal Products have any serious or willful violations? ▼
Yes. Detroit Tool Metal Products has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has Detroit Tool Metal Products been cited for wage theft? ▼
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Detroit Tool Metal Products, resulting in $0 in back wages owed to an undisclosed number of workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Detroit Tool Metal Products operate in? ▼
Detroit Tool Metal Products operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
What should I do if Detroit Tool Metal Products owes me wages? ▼
If you believe Detroit Tool Metal Products owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $0 in back wages owed by this employer across 1 case.
Where does Detroit Tool Metal Products rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Detroit Tool Metal Products ranks #9,329 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Detroit Tool Metal Products's safety record compare to industry average? ▼
Detroit Tool Metal Products's total OSHA penalty of $32,724 is above the Manufacturing industry average of $15,763 per employer (2.1x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, J.F. Fashion in Los Angeles, CA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.