PlainWorker
Employers › MI

Manufacturing · Ferndale, MI

Detail Precision Products INC

According to OSHA enforcement records (2010–2026), Detail Precision Products INC ranks #29,164 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 22 violations across 2 inspections.

Upper half by penalty55% serious
$12,350
OSHA penalties
22
Violations cited
2
OSHA inspections
#29,164
of 99,447 penalized employers

Detail Precision Products INC in Ferndale, MI has been the subject of 2 OSHA workplace inspections and 22 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $12,350. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Detail Precision Products INC 2 times across a longer 8-year span, an infrequent cadence. These inspections turned up 22 violations, averaging 11.0 per inspection - an extremely dense concentration of citations. According to OSHA enforcement records, its total current penalty ranks #29,164 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 12 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Circle Gear & Machine CO. INC., in Cicero, IL is another manufacturing employer with 3 OSHA inspections on record and $12,350 in current penalties.

11.0
violations per inspection
54.5%
of violations were serious
#29,164
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 22 violations across 2 OSHA inspections (11.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Detail Precision Products INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Detail Precision Products INC runs moderately below peers (0.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$12,350 Bottom 29% least affordable more affordable than 29% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Detail Precision Products INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0019.438.858.277.7OSHA inspectionsViolations citedCAVCO INDUSTRIES INC., OSHA inspections: 2 · Violations cited: 28LIPPERT COMPONENTS, …, OSHA inspections: 2 · Violations cited: 1PECE FOUNDRY, INC., OSHA inspections: 2 · Violations cited: 48U S SALT, LLC, OSHA inspections: 2 · Violations cited: 67ELDORALDO STONE, LLC, OSHA inspections: 2 · Violations cited: 10HUMBOLDT SAWMILL COM…, OSHA inspections: 2 · Violations cited: 5MATERIAL DIFFERENCE …, OSHA inspections: 2 · Violations cited: 20TEAM INDUSTRIES ANDR…, OSHA inspections: 2 · Violations cited: 74H.B. FULLER COMPANY, OSHA inspections: 2 · Violations cited: 12ATLAS BOLT & SCREW C…, OSHA inspections: 2 · Violations cited: 6ARDAGH GLASS, INC., OSHA inspections: 2 · Violations cited: 5GRANEX INDUSTRIES, I…, OSHA inspections: 2 · Violations cited: 9AZZ INC DBA AZZ GALV…, OSHA inspections: 2 · Violations cited: 22SYMMETRY MEDICAL, INC., OSHA inspections: 2 · Violations cited: 13PANDUIT CORP., OSHA inspections: 2 · Violations cited: 2HEISE INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 19ELECTRICFIL CORPORAT…, OSHA inspections: 2 · Violations cited: 6ICCO CHEESE COMPANY,…, OSHA inspections: 2 · Violations cited: 5CAMBRIDGE INC, OSHA inspections: 2 · Violations cited: 603FM, L.L.C., OSHA inspections: 2 · Violations cited: 17Detail Precision Pro…, OSHA inspections: 2 · Violations cited: 22
Detail Precision Products INC has 2 OSHA inspections on record and 22 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Detail Precision Products INC in the Manufacturing enforcement ledger

Manufacturing sector: Detail Precision Products INC is the #13,466 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($12,350).

How Detail Precision Products INC Compares

Detail Precision Products INC's 11.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2016-10-26

Last Inspection

2025-03-04

Inspection Span

8 yrs

Violations / Inspection

11.0

Avg Penalty / Inspection

$6,175

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 8 years, averaging 11.0 violations per visit. That's $6,175 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

12

Serious

54.5% of total

0

Willful

0.0% of total

2

Repeat

9.1% of total

8

Other-Than-Serious

36.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$16,900

Current Penalty Amount

$12,350

Penalty Reduction

26.9%

What this shows Penalties were reduced by $4,550 from the initial assessment of $16,900. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Detail Precision Products INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Detail Precision Products INC Industry Avg
Inspections 2 2.6
Violations 22 8.0
Total Penalty $12,350 $15,763
Avg Penalty per Inspection $6,175 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Detail Precision Products INC, both outside MI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($12,350 here).

Circle Gear & Machine CO. INC., $12,350 IL Nexans Aerospace USA, LLC $12,350 NC Truss Systems, INC. $12,350 GA Dover Pumps & Process Solutions Segment, INC. $12,348 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Cavco Industries INC. 2 insp. Austin, TX Lippert Components, INC. 2 insp. Beeville, TX Pece Foundry, INC. 2 insp. Prairieville, LA U S Salt, LLC 2 insp. Watkins Glen, NY

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Circle Gear & Machine CO. INC.,
Cicero, IL
3 inspections $12,350
Nexans Aerospace USA, LLC
Elm City, NC
2 inspections $12,350
Truss Systems, INC.
Oxford, GA
3 inspections $12,350
Dover Pumps & Process Solutions Segment, INC.
Houston, TX
2 inspections $12,348
Wichita Concrete Pipe INC.
Wichita, KS
2 inspections $12,348

Compare Detail Precision Products INC vs Circle Gear & Machine CO. INC., side-by-side →

What to do with this record

Use Detail Precision Products INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Detail Precision Products INC against Circle Gear & Machine CO. INC.,, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Detail Precision Products INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Detail Precision Products INC safe to work at? ▼
Based on OSHA records, Detail Precision Products INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 22 violations across 2 inspections, including 12 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Detail Precision Products INC have? ▼
Detail Precision Products INC has 22 OSHA violations on record, including 12 serious, 0 willful, and 2 repeat violations. The total current penalty amount is $12,350.
How many OSHA inspections has Detail Precision Products INC had? ▼
Detail Precision Products INC has had 2 OSHA inspections, with the first recorded on 2016-10-26 and the most recent on 2025-03-04. This averages 11.0 violations per inspection.
What is the total penalty amount for Detail Precision Products INC? ▼
Detail Precision Products INC has been assessed $12,350 in current OSHA penalties, reduced from an initial assessment of $16,900 (a 26.9% reduction).
Does Detail Precision Products INC have any serious or willful violations? ▼
Yes. Detail Precision Products INC has 12 serious violations, and 2 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Detail Precision Products INC operate in? ▼
Detail Precision Products INC operates in the Manufacturing sector (NAICS code 336413). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Detail Precision Products INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Detail Precision Products INC ranks #29,164 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Detail Precision Products INC's safety record compare to industry average? ▼
Detail Precision Products INC's total OSHA penalty of $12,350 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Circle Gear & Machine CO. INC., in Cicero, IL is a similar manufacturing employer with $12,350 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.