PlainWorker
Employers › TX

Manufacturing · Daingerfield, TX

Delta Fabrication & Machine, INC.

According to OSHA enforcement records (2010–2026), Delta Fabrication & Machine, INC. ranks #20,138 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 15 violations across 2 inspections.

Top 25% by penalty87% serious
$17,800
OSHA penalties
15
Violations cited
2
OSHA inspections
#20,138
of 99,447 penalized employers

Delta Fabrication & Machine, INC. in Daingerfield, TX has been the subject of 2 OSHA workplace inspections and 15 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,800. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Delta Fabrication & Machine, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 15 violations, averaging 7.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #20,138 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 13 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Albon Manufacturing, LLC in Norman, OK is another manufacturing employer with 4 OSHA inspections on record and $17,800 in current penalties.

7.5
violations per inspection
86.7%
of violations were serious
#20,138
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 15 violations across 2 OSHA inspections (7.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Delta Fabrication & Machine, INC. sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,800 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Delta Fabrication & Machine, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.68.115.522.930.4OSHA inspectionsViolations citedSILVER BAY SEAFOODS, LLC, OSHA inspections: 2 · Violations cited: 5PRECISION BUILD SOLUTIONS, LLC, OSHA inspections: 2 · Violations cited: 7MEGLIO INTERIORS, LLC, OSHA inspections: 2 · Violations cited: 14WEST COAST IRON, INC., OSHA inspections: 2 · Violations cited: 12NITREX INC., OSHA inspections: 2 · Violations cited: 22ALLIED TUBE AND CONDUIT CORP., OSHA inspections: 2 · Violations cited: 16MASTERCRAFTERS, INC., OSHA inspections: 2 · Violations cited: 29COASTAL INDUSTRIES, INC., OSHA inspections: 2 · Violations cited: 15ASSONET INDUSTRIES, INCORPORATED, OSHA inspections: 2 · Violations cited: 20BALDWIN FILTERS INC, OSHA inspections: 2 · Violations cited: 7MICROTECH KNIVES, INC., OSHA inspections: 2 · Violations cited: 24ROYAL INTERPACK NORTH AMERICA, INC., OSHA inspections: 2 · Violations cited: 11PIQUA CHAMPION FOUNDRY, INC., OSHA inspections: 2 · Violations cited: 21THE EUCLID CHEMICAL COMPANY, OSHA inspections: 2 · Violations cited: 2B Y MARBLE INC, OSHA inspections: 2 · Violations cited: 10JV MANUFACTURING, INC., OSHA inspections: 2 · Violations cited: 3AJINOMOTO FOODS NORTH AMERICA INC., OSHA inspections: 2 · Violations cited: 13NORTHERN WIND, INC., OSHA inspections: 2 · Violations cited: 9ACM MACHINING INC, OSHA inspections: 2 · Violations cited: 8CHROMA COLOR CORPORATION, OSHA inspections: 2 · Violations cited: 6Delta Fabrication & Machine, INC., OSHA inspections: 2 · Violations cited: 15
Delta Fabrication & Machine, INC. has 2 OSHA inspections on record and 15 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Delta Fabrication & Machine, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Delta Fabrication & Machine, INC. is the #9,608 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($17,800).

How Delta Fabrication & Machine, INC. Compares

Delta Fabrication & Machine, INC.'s 7.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2013-09-04

Last Inspection

2013-09-04

Inspection Span

1 yr

Violations / Inspection

7.5

Avg Penalty / Inspection

$8,900

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 7.5 violations per visit. That's $8,900 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

13

Serious

86.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

13.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$54,600

Current Penalty Amount

$17,800

Penalty Reduction

67.4%

What this shows Penalties were reduced by $36,800 from the initial assessment of $54,600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Delta Fabrication & Machine, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Delta Fabrication & Machine, INC. Industry Avg
Inspections 2 2.6
Violations 15 8.0
Total Penalty $17,800 $15,763
Avg Penalty per Inspection $8,900 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Delta Fabrication & Machine, INC., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($17,800 here).

Majestic Industries LLC $17,800 MI Seymour Manufacturing CO INC $17,800 TN Smith Packing Company, INC. $17,800 NY Albon Manufacturing, LLC $17,800 OK

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Silver Bay Seafoods, LLC 2 insp. False Pass, AK Precision Build Solutions, LLC 2 insp. Tampa, FL Meglio Interiors, LLC 2 insp. Chamblee, GA West Coast Iron, INC. 2 insp. Spring Valley, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Majestic Industries LLC
Macomb, MI
3 inspections $17,800
Seymour Manufacturing CO INC
Crossville, TN
3 inspections $17,800
Smith Packing Company, INC.
Utica, NY
6 inspections $17,800
Albon Manufacturing, LLC
Norman, OK
4 inspections $17,800
Sealed Air Corporation
Modena, PA
2 inspections $17,800

Compare Delta Fabrication & Machine, INC. vs Majestic Industries LLC side-by-side →

What to do with this record

Use Delta Fabrication & Machine, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Delta Fabrication & Machine, INC. against Majestic Industries LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Delta Fabrication & Machine, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Delta Fabrication & Machine, INC. safe to work at? ▼
Based on OSHA records, Delta Fabrication & Machine, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 15 violations across 2 inspections, including 13 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Delta Fabrication & Machine, INC. have? ▼
Delta Fabrication & Machine, INC. has 15 OSHA violations on record, including 13 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $17,800.
How many OSHA inspections has Delta Fabrication & Machine, INC. had? ▼
Delta Fabrication & Machine, INC. has had 2 OSHA inspections, with the first recorded on 2013-09-04 and the most recent on 2013-09-04. This averages 7.5 violations per inspection.
What is the total penalty amount for Delta Fabrication & Machine, INC.? ▼
Delta Fabrication & Machine, INC. has been assessed $17,800 in current OSHA penalties, reduced from an initial assessment of $54,600 (a 67.4% reduction).
Does Delta Fabrication & Machine, INC. have any serious or willful violations? ▼
Yes. Delta Fabrication & Machine, INC. has 13 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Delta Fabrication & Machine, INC. operate in? ▼
Delta Fabrication & Machine, INC. operates in the Manufacturing sector (NAICS code 332312). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Delta Fabrication & Machine, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Delta Fabrication & Machine, INC. ranks #20,138 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Delta Fabrication & Machine, INC.'s safety record compare to industry average? ▼
Delta Fabrication & Machine, INC.'s total OSHA penalty of $17,800 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Albon Manufacturing, LLC in Norman, OK is a similar manufacturing employer with $17,800 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.