Construction · Reno, NV

Dan Mills Construction

According to OSHA enforcement records (2010–2026), Dan Mills Construction ranks #11,347 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 9 violations across 5 inspections.

Top 25% by penalty33% serious
$28,455
OSHA penalties
9
Violations cited
5
OSHA inspections
#11,347
of 99,447 penalized employers

Dan Mills Construction in Reno, NV has been the subject of 5 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $28,455. Separately, the Department of Labor's Wage and Hour Division found $0 in back wages owed to an undisclosed number of workers. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Dan Mills Construction 5 times over 3 years, roughly annually. These inspections resulted in 9 violations, averaging 1.8 per inspection. According to OSHA enforcement records, its total current penalty ranks #11,347 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs well above peers (2.5x the sector average) on inspection frequency. The Department of Labor also found wage violations, with $0 in back wages owed to an undisclosed number of workers. For comparison, Maxtech Industries, Inc in Bronx, NY is another construction employer with 0 OSHA inspections on record and $0 in current penalties.

1.8
violations per inspection
33.3%
of violations were serious
#11,347
of 99,447 penalized employers
$0
in back wages recovered

Compliance score

C 78/100
  • D OSHA safety compliance: 9 violations across 5 OSHA inspections (1.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
  • A Wage & hour compliance: $0 in back wages owed across 1 WHD case ($0 per case), vs. national p10 $2K (best) / p90 $58K (worst) among 91,622 employers with a WHD case on file.
Open my watchlist

How Dan Mills Construction compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows Dan Mills Construction runs well above peers (4.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$28,455 Bottom 11% least affordable more affordable than 11% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). This entry sits in this band. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Dan Mills Construction.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both5.05.055.05.007.915.823.631.5OSHA inspectionsViolations citedJUAN HECTOR JIMENEZ, OSHA inspections: 5 · Violations cited: 13WJP BUILDERS CORP., OSHA inspections: 5 · Violations cited: 19ALI'I BUILDERS LLC, OSHA inspections: 5 · Violations cited: 30ISMAEL SANCHEZ, OSHA inspections: 5 · Violations cited: 18M3 MARSHALL CONTRACT…, OSHA inspections: 5 · Violations cited: 14QUALITY ROOFING, INC., OSHA inspections: 5 · Violations cited: 4ART OF THE CRAFT LAT…, OSHA inspections: 5 · Violations cited: 6BLAIR CONSTRUCTION I…, OSHA inspections: 5 · Violations cited: 0ROLAC CONTRACTING, I…, OSHA inspections: 5 · Violations cited: 0MONTOUR FALLS VILL DPW, OSHA inspections: 5 · Violations cited: 14MAUNA KEA ROOFING LLC, OSHA inspections: 5 · Violations cited: 6LEND LEASE (US) CONS…, OSHA inspections: 5 · Violations cited: 1NEW BEDFORD DEPARTME…, OSHA inspections: 5 · Violations cited: 11BUFFALO CONSTRUCTION…, OSHA inspections: 5 · Violations cited: 0SERENUS JOHNSON CONS…, OSHA inspections: 5 · Violations cited: 1SPENCE BROTHERS, OSHA inspections: 5 · Violations cited: 0JOHN MORIARTY & ASSO…, OSHA inspections: 5 · Violations cited: 0BLUE RIDGE TOWERS, OSHA inspections: 5 · Violations cited: 0CAROCON CORPORATION, OSHA inspections: 5 · Violations cited: 0OVID TN HIGHWAY DEPT, OSHA inspections: 5 · Violations cited: 8Dan Mills Construction, OSHA inspections: 5 · Violations cited: 9
Dan Mills Construction has 5 OSHA inspections on record and 9 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Dan Mills Construction in the Construction enforcement ledger

Among 33,222 Construction employers with OSHA penalties on file, Dan Mills Construction ranks #2,754 at $28,455 current penalty.

Combined federal exposure here: $28,455 OSHA penalties plus $0 WHD back wages (0.0% of the combined total is wage recovery).

How Dan Mills Construction Compares

Dan Mills Construction's 1.80 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs well above peers (4.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

5

First Inspection

2010-06-15

Last Inspection

2013-02-21

Inspection Span

3 yrs

Violations / Inspection

1.8

Avg Penalty / Inspection

$5,691

Industry Avg / Inspection

$3,361

What this shows 5 inspections over 3 years, averaging 1.8 violations per visit. That's $5,691 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

3

Serious

33.3% of total

0

Willful

0.0% of total

1

Repeat

11.1% of total

5

Other-Than-Serious

55.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$36,800

Current Penalty Amount

$28,455

Penalty Reduction

22.7%

Combined Impact (OSHA + WHD)

$28,455

What this shows Penalties were reduced by $8,345 from the initial assessment of $36,800. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Wage & Hour Findings

WHD Cases
1
Back Wages Owed
$0
Employees Affected
0
WHD Violations
1

Industry Safety Context: Construction

How Dan Mills Construction compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric Dan Mills Construction Industry Avg
Inspections 5 2.0
Violations 9 3.3
Total Penalty $28,455 $6,767
Avg Penalty per Inspection $5,691 $3,361

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for Dan Mills Construction, both outside NV so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($28,455 here).

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (5 inspections here).

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Compare Dan Mills Construction vs CRI Construction side-by-side →

What to do with this record

Use Dan Mills Construction's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Dan Mills Construction against CRI Construction, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Dan Mills Construction's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Dan Mills Construction also carries $0 in Wage and Hour Division back-wages, a separate enforcement track from OSHA safety violations. How wage-theft enforcement works

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Dan Mills Construction safe to work at?
Based on OSHA records, Dan Mills Construction's workplace safety record is concerning, with multiple serious compliance issues. The employer has 9 violations across 5 inspections, including 3 serious violations. Compared to Construction industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Dan Mills Construction have?
Dan Mills Construction has 9 OSHA violations on record, including 3 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $28,455.
How many OSHA inspections has Dan Mills Construction had?
Dan Mills Construction has had 5 OSHA inspections, with the first recorded on 2010-06-15 and the most recent on 2013-02-21. This averages 1.8 violations per inspection.
What is the total penalty amount for Dan Mills Construction?
Dan Mills Construction has been assessed $28,455 in current OSHA penalties, reduced from an initial assessment of $36,800 (a 22.7% reduction). Additionally, $0 in back wages were owed through WHD enforcement.
Does Dan Mills Construction have any serious or willful violations?
Yes. Dan Mills Construction has 3 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
Has Dan Mills Construction been cited for wage theft?
Yes. The Department of Labor's Wage and Hour Division has recorded 1 enforcement case against Dan Mills Construction, resulting in $0 in back wages owed to an undisclosed number of workers. These cases involve violations of federal labor laws including minimum wage, overtime, and other worker protections.
What industry does Dan Mills Construction operate in?
Dan Mills Construction operates in the Construction sector (NAICS code 238130). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
What should I do if Dan Mills Construction owes me wages?
If you believe Dan Mills Construction owes you wages, you can file a complaint with the Department of Labor's Wage and Hour Division at dol.gov/agencies/whd/contact/complaints or by calling 1-866-487-9243. WHD investigates violations of the Fair Labor Standards Act including unpaid minimum wage, overtime, and unauthorized deductions. The DOL has previously found $0 in back wages owed by this employer across 1 case.
Where does Dan Mills Construction rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Dan Mills Construction ranks #11,347 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Dan Mills Construction's safety record compare to industry average?
Dan Mills Construction's total OSHA penalty of $28,455 is above the Construction industry average of $6,767 per employer (4.2x the average). The employer has 5 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Maxtech Industries, Inc in Bronx, NY is a similar construction employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 5 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.