PlainWorker
Employers › CA

Manufacturing · Fairfield, CA

D & y Door and Millwork, INC.

According to OSHA enforcement records (2010–2026), D & y Door and Millwork, INC. ranks #18,928 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 19 violations across 2 inspections.

Top 25% by penalty37% serious
$18,735
OSHA penalties
19
Violations cited
2
OSHA inspections
#18,928
of 99,447 penalized employers

D & y Door and Millwork, INC. in Fairfield, CA has been the subject of 2 OSHA workplace inspections and 19 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $18,735. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected D & y Door and Millwork, INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 19 violations, averaging 9.5 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #18,928 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Meyer Machine & Equipment, INC DBA Hardy Pro-Air Systems & Service in Antioch, IL is another manufacturing employer with 2 OSHA inspections on record and $18,743 in current penalties.

9.5
violations per inspection
36.8%
of violations were serious
#18,928
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 19 violations across 2 OSHA inspections (9.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How D & y Door and Millwork, INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows D & y Door and Millwork, INC. sits roughly in line with peers (1.2x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$18,735 Bottom 19% least affordable more affordable than 19% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is D & y Door and Millwork, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.39.919.529.138.8OSHA inspectionsViolations citedREGAL INDUSTRIAL COR…, OSHA inspections: 2 · Violations cited: 23LAB 9 MODULAR LLC, OSHA inspections: 2 · Violations cited: 12TWITCHELL CORPORATION, OSHA inspections: 2 · Violations cited: 22CHEP RECYCLED PALLET…, OSHA inspections: 2 · Violations cited: 6GRAHAM LUMBER COMPAN…, OSHA inspections: 2 · Violations cited: 2ACH FOAM TECHNOLOGIE…, OSHA inspections: 2 · Violations cited: 13TIGHITCO, INC., OSHA inspections: 2 · Violations cited: 16AMERICAN MADE TIRES, OSHA inspections: 2 · Violations cited: 37U.S. PAPER MILLS CORP., OSHA inspections: 2 · Violations cited: 8WINCO/DWL INTERNATIO…, OSHA inspections: 2 · Violations cited: 8SYFRETT FEED CO., INC., OSHA inspections: 2 · Violations cited: 21INTEGRATED LAMINATE …, OSHA inspections: 2 · Violations cited: 29TBRSP, LLC, OSHA inspections: 2 · Violations cited: 23SIGNATURE CABINETRY, OSHA inspections: 2 · Violations cited: 15MILLWORK EXPRESSIONS…, OSHA inspections: 2 · Violations cited: 28MB DYNAMICS INC., OSHA inspections: 2 · Violations cited: 33SOUTHERN FOREST PROD…, OSHA inspections: 2 · Violations cited: 12KRAFT HEINZ FOODS CO…, OSHA inspections: 2 · Violations cited: 6NASHVILLE FABRICATIO…, OSHA inspections: 2 · Violations cited: 29HARD ROCK STONE & TI…, OSHA inspections: 2 · Violations cited: 15D & y Door and Millw…, OSHA inspections: 2 · Violations cited: 19
D & y Door and Millwork, INC. has 2 OSHA inspections on record and 19 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

D & y Door and Millwork, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, D & y Door and Millwork, INC. ranks #9,101 at $18,735 current penalty.

How D & y Door and Millwork, INC. Compares

D & y Door and Millwork, INC.'s 9.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.2x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-05-15

Last Inspection

2019-05-15

Inspection Span

1 yr

Violations / Inspection

9.5

Avg Penalty / Inspection

$9,368

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 9.5 violations per visit. That's $9,368 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

36.8% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

12

Other-Than-Serious

63.2% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$37,155

Current Penalty Amount

$18,735

Penalty Reduction

49.6%

What this shows Penalties were reduced by $18,420 from the initial assessment of $37,155. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How D & y Door and Millwork, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric D & y Door and Millwork, INC. Industry Avg
Inspections 2 2.6
Violations 19 8.0
Total Penalty $18,735 $15,763
Avg Penalty per Inspection $9,368 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for D & y Door and Millwork, INC., both outside CA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($18,735 here).

G & J Pepsi-Cola Bottlers, INC. $18,738 OH United Utilities Specialists, L.L.C. $18,739 OK Woodland Industries, INC. $18,728 GA Meyer Machine & Equipment, INC DBA Hardy Pro-Air Systems & Service $18,743 IL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Regal Industrial Corporation 2 insp. Millville, NJ Lab 9 Modular LLC 2 insp. Littleton, MA Twitchell Corporation 2 insp. Dothan, AL Chep Recycled Pallet Solutions, LLC 2 insp. Scarborough, ME

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

G & J Pepsi-Cola Bottlers, INC.
Columbus, OH
3 inspections $18,738
United Utilities Specialists, L.L.C.
Bixby, OK
2 inspections $18,739
Gallo Glass Company
Modesto, CA
11 inspections $18,730
Woodland Industries, INC.
Griffin, GA
6 inspections $18,728
Meyer Machine & Equipment, INC DBA Hardy Pro-Air Systems & Service
Antioch, IL
2 inspections $18,743

Compare D & y Door and Millwork, INC. vs G & J Pepsi-Cola Bottlers, INC. side-by-side →

What to do with this record

Use D & y Door and Millwork, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare D & y Door and Millwork, INC. against G & J Pepsi-Cola Bottlers, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether D & y Door and Millwork, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is D & y Door and Millwork, INC. safe to work at? ▼
Based on OSHA records, D & y Door and Millwork, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 19 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does D & y Door and Millwork, INC. have? ▼
D & y Door and Millwork, INC. has 19 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $18,735.
How many OSHA inspections has D & y Door and Millwork, INC. had? ▼
D & y Door and Millwork, INC. has had 2 OSHA inspections, with the first recorded on 2019-05-15 and the most recent on 2019-05-15. This averages 9.5 violations per inspection.
What is the total penalty amount for D & y Door and Millwork, INC.? ▼
D & y Door and Millwork, INC. has been assessed $18,735 in current OSHA penalties, reduced from an initial assessment of $37,155 (a 49.6% reduction).
Does D & y Door and Millwork, INC. have any serious or willful violations? ▼
Yes. D & y Door and Millwork, INC. has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does D & y Door and Millwork, INC. operate in? ▼
D & y Door and Millwork, INC. operates in the Manufacturing sector (NAICS code 321911). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does D & y Door and Millwork, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, D & y Door and Millwork, INC. ranks #18,928 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does D & y Door and Millwork, INC.'s safety record compare to industry average? ▼
D & y Door and Millwork, INC.'s total OSHA penalty of $18,735 is above the Manufacturing industry average of $15,763 per employer (1.2x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Meyer Machine & Equipment, INC DBA Hardy Pro-Air Systems & Service in Antioch, IL is a similar manufacturing employer with $18,743 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.