PlainWorker
Employers › NY

Manufacturing · Avon, NY

D. P. Tool & Machine INC

According to OSHA enforcement records (2010–2026), D. P. Tool & Machine INC ranks #35,766 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Upper half by penalty71% serious
$9,784
OSHA penalties
7
Violations cited
2
OSHA inspections
#35,766
of 99,447 penalized employers

D. P. Tool & Machine INC in Avon, NY has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $9,784. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected D. P. Tool & Machine INC 2 times across a longer 13-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #35,766 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 5 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Cleveland Plating, LLC in Cleveland, OH is another manufacturing employer with 2 OSHA inspections on record and $9,780 in current penalties.

3.5
violations per inspection
71.4%
of violations were serious
#35,766
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How D. P. Tool & Machine INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows D. P. Tool & Machine INC runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$9,784 Bottom 36% least affordable more affordable than 36% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is D. P. Tool & Machine INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.818.235.552.870.2OSHA inspectionsViolations citedNAKANISHI MANUFACTUR…, OSHA inspections: 2 · Violations cited: 23WILMINGTON FIBRE SPE…, OSHA inspections: 2 · Violations cited: 24KD ACQUISITION I, LL…, OSHA inspections: 2 · Violations cited: 11MERIDIAN MANUFACTURI…, OSHA inspections: 2 · Violations cited: 67DOWNEY METAL PRODUCT…, OSHA inspections: 2 · Violations cited: 21ALQUIST 3D, LLC, OSHA inspections: 2 · Violations cited: 6PIED PIPER PET FOOD …, OSHA inspections: 2 · Violations cited: 15O'NEAL MANUFACTURING…, OSHA inspections: 2 · Violations cited: 6RONPAK INC, OSHA inspections: 2 · Violations cited: 9DART CONTAINER CORPO…, OSHA inspections: 2 · Violations cited: 5POTOMAC ARCHITECTURA…, OSHA inspections: 2 · Violations cited: 11MICHAEL DAWKINS GROU…, OSHA inspections: 2 · Violations cited: 24GEORGIA PACIFIC WOOD…, OSHA inspections: 2 · Violations cited: 5STURM, RUGER & COMPA…, OSHA inspections: 2 · Violations cited: 21MOUNTAIN CITY MEAT C…, OSHA inspections: 2 · Violations cited: 14TRI-STATE LUMBER & L…, OSHA inspections: 2 · Violations cited: 4SUPERIOR FOODS COMPA…, OSHA inspections: 2 · Violations cited: 11BOCAR US, INC., OSHA inspections: 2 · Violations cited: 13ADVANCED FIBER, LLC, OSHA inspections: 2 · Violations cited: 9CUSTOM MOBILE EQUIPM…, OSHA inspections: 2 · Violations cited: 9D. P. Tool & Machine…, OSHA inspections: 2 · Violations cited: 7
D. P. Tool & Machine INC has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

D. P. Tool & Machine INC in the Manufacturing enforcement ledger

Manufacturing sector: D. P. Tool & Machine INC is the #16,056 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($9,784).

How D. P. Tool & Machine INC Compares

D. P. Tool & Machine INC's 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-05-31

Last Inspection

2025-09-23

Inspection Span

13 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$4,892

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 13 years, averaging 3.5 violations per visit. That's $4,892 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

5

Serious

71.4% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

28.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$17,375

Current Penalty Amount

$9,784

Penalty Reduction

43.7%

What this shows Penalties were reduced by $7,591 from the initial assessment of $17,375. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How D. P. Tool & Machine INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric D. P. Tool & Machine INC Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $9,784 $15,763
Avg Penalty per Inspection $4,892 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for D. P. Tool & Machine INC, both outside NY so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($9,784 here).

Rustique Enterprises, INC. $9,783 MO Adco International Plastics Corporation $9,785 GA Boyd Lighting Company $9,786 CO Cleveland Plating, LLC $9,780 OH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Nakanishi Manufacturing Corporation 2 insp. Winterville, GA Wilmington Fibre Specialty Company, INC. 2 insp. New Castle, DE KD Acquisition I, LLC (DBA Coleman Natural Foods) 2 insp. Braselton, GA Meridian Manufacturing Group, INC. 2 insp. Storm Lake, IA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Rustique Enterprises, INC.
O Fallon, MO
2 inspections $9,783
Adco International Plastics Corporation
Marietta, GA
3 inspections $9,785
Boyd Lighting Company
Colorado Springs, CO
2 inspections $9,786
Cleveland Plating, LLC
Cleveland, OH
2 inspections $9,780
E-B Display Company INC
Massillon, OH
3 inspections $9,780

Compare D. P. Tool & Machine INC vs Rustique Enterprises, INC. side-by-side →

What to do with this record

Use D. P. Tool & Machine INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare D. P. Tool & Machine INC against Rustique Enterprises, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether D. P. Tool & Machine INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is D. P. Tool & Machine INC safe to work at? ▼
Based on OSHA records, D. P. Tool & Machine INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 5 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does D. P. Tool & Machine INC have? ▼
D. P. Tool & Machine INC has 7 OSHA violations on record, including 5 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $9,784.
How many OSHA inspections has D. P. Tool & Machine INC had? ▼
D. P. Tool & Machine INC has had 2 OSHA inspections, with the first recorded on 2012-05-31 and the most recent on 2025-09-23. This averages 3.5 violations per inspection.
What is the total penalty amount for D. P. Tool & Machine INC? ▼
D. P. Tool & Machine INC has been assessed $9,784 in current OSHA penalties, reduced from an initial assessment of $17,375 (a 43.7% reduction).
Does D. P. Tool & Machine INC have any serious or willful violations? ▼
Yes. D. P. Tool & Machine INC has 5 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does D. P. Tool & Machine INC operate in? ▼
D. P. Tool & Machine INC operates in the Manufacturing sector (NAICS code 332721). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does D. P. Tool & Machine INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, D. P. Tool & Machine INC ranks #35,766 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does D. P. Tool & Machine INC's safety record compare to industry average? ▼
D. P. Tool & Machine INC's total OSHA penalty of $9,784 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Cleveland Plating, LLC in Cleveland, OH is a similar manufacturing employer with $9,780 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.