PlainWorker
Employers › MO

Manufacturing · Belton, MO

Custom Steel Manufacturing, INC

According to OSHA enforcement records (2010–2026), Custom Steel Manufacturing, INC ranks #20,386 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 14 violations across 2 inspections.

Top 25% by penalty50% serious
$17,571
OSHA penalties
14
Violations cited
2
OSHA inspections
#20,386
of 99,447 penalized employers

Custom Steel Manufacturing, INC in Belton, MO has been the subject of 2 OSHA workplace inspections and 14 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $17,571. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Custom Steel Manufacturing, INC 2 times across a longer 6-year span, an infrequent cadence. These inspections resulted in 14 violations, averaging 7.0 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #20,386 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Flanders Precisionaire of NY in Hudson, NY is another manufacturing employer with 3 OSHA inspections on record and $17,568 in current penalties.

7.0
violations per inspection
50.0%
of violations were serious
#20,386
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 14 violations across 2 OSHA inspections (7.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Custom Steel Manufacturing, INC sits roughly in line with peers (1.1x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$17,571 Bottom 20% least affordable more affordable than 20% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). This entry sits in this band. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Custom Steel Manufacturing, INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.0016.53349.566OSHA inspectionsViolations citedTHE VALLEY FERTILIZE…, OSHA inspections: 2 · Violations cited: 63MCDOWELL AND WALKER,…, OSHA inspections: 2 · Violations cited: 164C FOODS CORP., OSHA inspections: 2 · Violations cited: 6KRESTMARK INDUSTRIES…, OSHA inspections: 2 · Violations cited: 18NORDSON XALOY INCORP…, OSHA inspections: 2 · Violations cited: 3MEXICHEM FLUOR INC., OSHA inspections: 2 · Violations cited: 6GARELICK FARMS, LLC, OSHA inspections: 2 · Violations cited: 13TYLER PRODUCTS SALES…, OSHA inspections: 2 · Violations cited: 15I SCHUMANN & CO. LLC, OSHA inspections: 2 · Violations cited: 7GREYSTONE LOGISTICS …, OSHA inspections: 2 · Violations cited: 14SEMANO INC., OSHA inspections: 2 · Violations cited: 21BLACKPOWDER PRODUCTS…, OSHA inspections: 2 · Violations cited: 10THE EUCLID CHEMICAL …, OSHA inspections: 2 · Violations cited: 4YYK ENTERPRISES OPER…, OSHA inspections: 2 · Violations cited: 14HARBOR FURNITURE MAN…, OSHA inspections: 2 · Violations cited: 22H. E. TOOL & DIE CORP., OSHA inspections: 2 · Violations cited: 44SANYO FOODS CORPORAT…, OSHA inspections: 2 · Violations cited: 10BUZZI UNICEM USA, OSHA inspections: 2 · Violations cited: 5SPECIALIZED BICYCLE …, OSHA inspections: 2 · Violations cited: 11EXXONMOBIL BATON ROU…, OSHA inspections: 2 · Violations cited: 9Custom Steel Manufac…, OSHA inspections: 2 · Violations cited: 14
Custom Steel Manufacturing, INC has 2 OSHA inspections on record and 14 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Custom Steel Manufacturing, INC in the Manufacturing enforcement ledger

In Manufacturing, Custom Steel Manufacturing, INC sits at penalty rank #9,730 of 35,243 penalized establishments ($17,571 assessed).

How Custom Steel Manufacturing, INC Compares

Custom Steel Manufacturing, INC's 7.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (1.1x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2019-05-14

Last Inspection

2025-05-02

Inspection Span

6 yrs

Violations / Inspection

7.0

Avg Penalty / Inspection

$8,786

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 6 years, averaging 7.0 violations per visit. That's $8,786 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

7

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

7

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$43,861

Current Penalty Amount

$17,571

Penalty Reduction

59.9%

What this shows Penalties were reduced by $26,290 from the initial assessment of $43,861. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Custom Steel Manufacturing, INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Custom Steel Manufacturing, INC Industry Avg
Inspections 2 2.6
Violations 14 8.0
Total Penalty $17,571 $15,763
Avg Penalty per Inspection $8,786 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Custom Steel Manufacturing, INC, both outside MO so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($17,571 here).

Flanders Precisionaire of NY $17,568 NY National Beef Packing CO LLC $17,575 KS Felman Production LLC $17,566 WV Fab-Braze Corporation $17,577 NH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

The Valley Fertilizer and Chemical Company Incorporated 2 insp. Mount Jackson, VA McDowell and Walker, INC. 2 insp. Afton, NY 4c Foods CORP. 2 insp. Brooklyn, NY Krestmark Industries, LP 2 insp. Dallas, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

J.B. Design Inc.
Rosemead, CA
0 inspections $0
Flanders Precisionaire of NY
Hudson, NY
3 inspections $17,568
National Beef Packing CO LLC
Dodge City, KS
2 inspections $17,575
Felman Production LLC
Letart, WV
5 inspections $17,566
Fab-Braze Corporation
Nashua, NH
3 inspections $17,577

Compare Custom Steel Manufacturing, INC vs J.B. Design Inc. side-by-side →

What to do with this record

Use Custom Steel Manufacturing, INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Custom Steel Manufacturing, INC against J.B. Design Inc., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Custom Steel Manufacturing, INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Custom Steel Manufacturing, INC safe to work at? ▼
Based on OSHA records, Custom Steel Manufacturing, INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 14 violations across 2 inspections, including 7 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Custom Steel Manufacturing, INC have? ▼
Custom Steel Manufacturing, INC has 14 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $17,571.
How many OSHA inspections has Custom Steel Manufacturing, INC had? ▼
Custom Steel Manufacturing, INC has had 2 OSHA inspections, with the first recorded on 2019-05-14 and the most recent on 2025-05-02. This averages 7.0 violations per inspection.
What is the total penalty amount for Custom Steel Manufacturing, INC? ▼
Custom Steel Manufacturing, INC has been assessed $17,571 in current OSHA penalties, reduced from an initial assessment of $43,861 (a 59.9% reduction).
Does Custom Steel Manufacturing, INC have any serious or willful violations? ▼
Yes. Custom Steel Manufacturing, INC has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Custom Steel Manufacturing, INC operate in? ▼
Custom Steel Manufacturing, INC operates in the Manufacturing sector (NAICS code 332999). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Custom Steel Manufacturing, INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Custom Steel Manufacturing, INC ranks #20,386 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Custom Steel Manufacturing, INC's safety record compare to industry average? ▼
Custom Steel Manufacturing, INC's total OSHA penalty of $17,571 is above the Manufacturing industry average of $15,763 per employer (1.1x the average). The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Flanders Precisionaire of NY in Hudson, NY is a similar manufacturing employer with $17,568 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.