PlainWorker
Employers › FL

Manufacturing · Fort Myers, FL

Crowther Roofing & Sheet Metal of Florida, INC.

According to OSHA enforcement records (2010–2026), Crowther Roofing & Sheet Metal of Florida, INC. has a relatively clean safety record: 2 violations across 2 inspections. See the full breakdown below.

Upper half by penalty100% serious
$9,639
OSHA penalties
2
Violations cited
2
OSHA inspections
#36,417
of 100,495 penalized employers

Crowther Roofing & Sheet Metal of Florida, INC. in Fort Myers, FL has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $9,639. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Crowther Roofing & Sheet Metal of Florida, INC. 2 times across a longer 7-year span, an infrequent cadence. These inspections resulted in 2 violations, averaging 1.0 per inspection. Its total OSHA penalty ranks in the upper half of penalized employers nationally. Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Butterball LLC in Carthage, MO is another manufacturing employer with 5 OSHA inspections on record and $9,639 in current penalties.

1.0
violations per inspection
100.0%
of violations were serious
64%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Crowther Roofing & Sheet Metal of Florida, INC. runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$9,639 Bottom 36% least affordable more affordable than 36% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). This entry sits in this band. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Crowther Roofing & Sheet Metal of Florida, INC.

The federal enforcement record for Crowther Roofing & Sheet Metal of Florida, INC. in Fort Myers, FL includes 2 OSHA inspections and 2 violations, translating to 1.00 violations per inspection. Of those violations, 2 (100.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $9,639 in initial penalties against this employer, later adjusted to a current total of $9,639 - no reduction from the original assessment. Average penalty per inspection works out to $4,820. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately below peers (0.6x the sector average).

Inspection activity spans from 2014-02-25 to 2020-10-27, a window of roughly 7 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2014-02-25

Last Inspection

2020-10-27

Inspection Span

7 yrs

Violations / Inspection

1.0

Avg Penalty / Inspection

$4,820

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 7 years, averaging 1.0 violations per visit. That's $4,820 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

2

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$9,639

Current Penalty Amount

$9,639

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Crowther Roofing & Sheet Metal of Florida, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Crowther Roofing & Sheet Metal of Florida, INC. Industry Avg
Inspections 2 2.5
Violations 2 7.8
Total Penalty $9,639 $15,410
Avg Penalty per Inspection $4,820 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Bimbo Bakeries USA, INC.
Houston, TX
2 inspections $9,639
Encon Colorado
Denver, CO
3 inspections $9,639
Gateway Packaging INC DBA Proampac
Granite City, IL
2 inspections $9,639
Butterball LLC
Carthage, MO
5 inspections $9,639
Sterling Steel Company, LLC
Sterling, IL
2 inspections $9,639

Compare Crowther Roofing & Sheet Metal of Florida, INC. vs Bimbo Bakeries USA, INC. side-by-side →

Frequently Asked Questions

Is Crowther Roofing & Sheet Metal of Florida, INC. safe to work at? ▼
Based on OSHA records, Crowther Roofing & Sheet Metal of Florida, INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Crowther Roofing & Sheet Metal of Florida, INC. have? ▼
Crowther Roofing & Sheet Metal of Florida, INC. has 2 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $9,639.
How many OSHA inspections has Crowther Roofing & Sheet Metal of Florida, INC. had? ▼
Crowther Roofing & Sheet Metal of Florida, INC. has had 2 OSHA inspections, with the first recorded on 2014-02-25 and the most recent on 2020-10-27. This averages 1.0 violations per inspection.
What is the total penalty amount for Crowther Roofing & Sheet Metal of Florida, INC.? ▼
Crowther Roofing & Sheet Metal of Florida, INC. has been assessed $9,639 in current OSHA penalties.
Does Crowther Roofing & Sheet Metal of Florida, INC. have any serious or willful violations? ▼
Yes. Crowther Roofing & Sheet Metal of Florida, INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Crowther Roofing & Sheet Metal of Florida, INC. operate in? ▼
Crowther Roofing & Sheet Metal of Florida, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Crowther Roofing & Sheet Metal of Florida, INC.'s safety record compare to industry average? ▼
Crowther Roofing & Sheet Metal of Florida, INC.'s total OSHA penalty of $9,639 is below the Manufacturing industry average of $15,410 per employer. The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Butterball LLC in Carthage, MO is a similar manufacturing employer with $9,639 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in FL

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Crowther Roofing & Sheet Metal of Florida, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

  • See how Crowther Roofing & Sheet Metal of Florida, INC. compares to the 45,665 other employers in Manufacturing. Manufacturing record
  • Put this employer head-to-head with another on inspections, penalties, and back wages. Compare employers
  • Review the full OSHA & wage-enforcement picture for FL. FL state record

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.