PlainWorker
Employers › KS

Manufacturing · Abilene, KS

Crown TL, INC

According to OSHA enforcement records (2010–2026), Crown TL, INC has a relatively clean safety record: 0 violations across 3 inspections. See the full breakdown below.

$0
OSHA penalties
0
Violations cited
3
OSHA inspections

Crown TL, INC in Abilene, KS has been the subject of 3 OSHA workplace inspections and 0 citations since 2010, according to enforcement records from the U.S. Department of Labor. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Crown TL, INC 3 times across a longer 13-year span, an infrequent cadence. None of these inspections resulted in a citation. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Honeywell International, INC. in Mars Hill, NC is another manufacturing employer with 2 OSHA inspections on record and $0 in current penalties.

0.0
violations per inspection
0.0%
of violations were serious

Compliance score

A 90/100
  • A OSHA safety compliance: 0 violations across 3 OSHA inspections (0.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Crown TL, INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0010.821.532.343.0OSHA inspectionsViolations citedDOSKOCIL MANUFACTURI…, OSHA inspections: 3 · Violations cited: 9ASSOCIATED MATERIALS…, OSHA inspections: 3 · Violations cited: 17THERMWELL PRODUCTS C…, OSHA inspections: 3 · Violations cited: 18CB MANUFACTURING & S…, OSHA inspections: 3 · Violations cited: 30SAM DONG OHIO, INC., OSHA inspections: 3 · Violations cited: 10TOM'S QUALITY MILLWO…, OSHA inspections: 3 · Violations cited: 20DOMINION LIQUID TECH…, OSHA inspections: 3 · Violations cited: 11SENOX CORPORATION, OSHA inspections: 3 · Violations cited: 4Q&B FOODS INC., OSHA inspections: 3 · Violations cited: 13AMERICAN FOODS GROUP…, OSHA inspections: 3 · Violations cited: 17RANDOLPH PACKING CO., OSHA inspections: 3 · Violations cited: 8GMP METAL PRODUCTS, OSHA inspections: 3 · Violations cited: 13O-FLEX METAL FINISHING, OSHA inspections: 3 · Violations cited: 18WILLIAM E. DAILEY PR…, OSHA inspections: 3 · Violations cited: 8NORTHWAY INDUSTRIES,…, OSHA inspections: 3 · Violations cited: 7HYDRO EXTRUSION USA …, OSHA inspections: 3 · Violations cited: 4REED LUMBER CO., OSHA inspections: 3 · Violations cited: 6KOCH FOODS LLC, OSHA inspections: 3 · Violations cited: 13ROLLED SHAPES & ENGI…, OSHA inspections: 3 · Violations cited: 41LAVOI CORPORATION DB…, OSHA inspections: 3 · Violations cited: 2Crown TL, INC, OSHA inspections: 3 · Violations cited: 0
Crown TL, INC has 3 OSHA inspections on record and 0 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

How Crown TL, INC Compares

3 OSHA inspections on record for Crown TL, INC in Abilene, KS, zero violations cited, a cleaner record than the Manufacturing sector average of 8.0 violations per employer.

No OSHA penalty has been assessed against Crown TL, INC to date. The Manufacturing sector average runs $15,763 per employer.

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2012-01-04

Last Inspection

2025-01-22

Inspection Span

13 yrs

Violations / Inspection

0.0

Avg Penalty / Inspection

$0

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 13 years, averaging 0.0 violations per visit. That's $0 per inspection vs. the Manufacturing average of $6,093.

Industry Safety Context: Manufacturing

How Crown TL, INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Crown TL, INC Industry Avg
Inspections 3 2.6
Violations 0 8.0
Total Penalty $0 $15,763
Avg Penalty per Inspection $0 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Crown TL, INC, both outside KS so the neighborhoods are not geographic containment.

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Doskocil Manufacturing INC 3 insp. Arlington, TX Associated Materials Incorporated 3 insp. Cedar Rapids, IA Thermwell Products CO., INC. 3 insp. Mahwah, NJ CB Manufacturing & Sales Company, INC. 3 insp. Dayton, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

United Felts, INC.
Martinsville, VA
3 inspections $0
Honeywell International, INC.
Mars Hill, NC
2 inspections $0
Jeld-Wen, INC.
Ringtown, PA
2 inspections $0
Burly Products
Post Falls, ID
2 inspections $0
Easco Hand Tools, INC. DBA Danaher Tool Group
Gastonia, NC
2 inspections $0

Compare Crown TL, INC vs United Felts, INC. side-by-side →

What to do with this record

Use Crown TL, INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Crown TL, INC against United Felts, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Crown TL, INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Crown TL, INC safe to work at? ▼
Based on OSHA records, Crown TL, INC's workplace safety record is relatively clean, with fewer violations than typical. The employer has 0 violations across 3 inspections. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Crown TL, INC have? ▼
Crown TL, INC has 0 OSHA violations on record, including 0 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $0.
How many OSHA inspections has Crown TL, INC had? ▼
Crown TL, INC has had 3 OSHA inspections, with the first recorded on 2012-01-04 and the most recent on 2025-01-22. This averages 0.0 violations per inspection.
What is the total penalty amount for Crown TL, INC? ▼
Crown TL, INC has been assessed $0 in current OSHA penalties.
What industry does Crown TL, INC operate in? ▼
Crown TL, INC operates in the Manufacturing sector (NAICS code 337110). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
How does Crown TL, INC's safety record compare to industry average? ▼
Crown TL, INC's total OSHA penalty of $0 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Honeywell International, INC. in Mars Hill, NC is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.