PlainWorker
Employers › GA

Manufacturing · Woodbury, GA

Crown Technology, LLC

According to OSHA enforcement records (2010–2026), Crown Technology, LLC ranks #24,558 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 9 violations across 3 inspections.

Top 25% by penalty100% serious
$14,738
OSHA penalties
9
Violations cited
3
OSHA inspections
#24,558
of 99,447 penalized employers

Crown Technology, LLC in Woodbury, GA has been the subject of 3 OSHA workplace inspections and 9 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $14,738. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Crown Technology, LLC 3 times over 4 years, roughly once every couple of years. These inspections resulted in 9 violations, averaging 3.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #24,558 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 9 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, United States Gypsum Company in North Kansas City, MO is another manufacturing employer with 2 OSHA inspections on record and $14,734 in current penalties.

3.0
violations per inspection
100.0%
of violations were serious
#24,558
of 99,447 penalized employers

Compliance score

F 46/100
  • F OSHA safety compliance: 9 violations across 3 OSHA inspections (3.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Crown Technology, LLC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Crown Technology, LLC sits roughly in line with peers (0.9x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$14,738 Bottom 25% least affordable more affordable than 25% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Crown Technology, LLC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.04.413.22230.839.6OSHA inspectionsViolations citedMORTEX PRODUCTS, INC., OSHA inspections: 3 · Violations cited: 11ABC COKE-DIVISION OF…, OSHA inspections: 3 · Violations cited: 34EATON CORPORATION, OSHA inspections: 3 · Violations cited: 38ALKON CORPORATION, OSHA inspections: 3 · Violations cited: 14TATE & LYLE INGREDIE…, OSHA inspections: 3 · Violations cited: 9U.S. ZINC CORPORATION, OSHA inspections: 3 · Violations cited: 9RAFFIELD FISHERIES, …, OSHA inspections: 3 · Violations cited: 26SOLARIS PAPER INC, OSHA inspections: 3 · Violations cited: 6PENNAKEM LLC, OSHA inspections: 3 · Violations cited: 17R BRAUN INC., OSHA inspections: 3 · Violations cited: 27MARQUEZ BROTHERS INT…, OSHA inspections: 3 · Violations cited: 20JOHNS MANVILLE, INC., OSHA inspections: 3 · Violations cited: 14FECON, INC., OSHA inspections: 3 · Violations cited: 11HANDI-FOIL CORP., OSHA inspections: 3 · Violations cited: 8TENNESSEE BUSINESS F…, OSHA inspections: 3 · Violations cited: 6OMYA INC., OSHA inspections: 3 · Violations cited: 6COLUMBUS MARBLE WORK…, OSHA inspections: 3 · Violations cited: 23LITE METALS COMPANY, OSHA inspections: 3 · Violations cited: 8CAB INCORPORATED, OSHA inspections: 3 · Violations cited: 7BETTENDORF STANFORD …, OSHA inspections: 3 · Violations cited: 8Crown Technology, LLC, OSHA inspections: 3 · Violations cited: 9
Crown Technology, LLC has 3 OSHA inspections on record and 9 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Crown Technology, LLC in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Crown Technology, LLC ranks #11,596 at $14,738 current penalty.

How Crown Technology, LLC Compares

Crown Technology, LLC's 3.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty sits roughly in line with peers (0.9x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-08-27

Last Inspection

2014-11-13

Inspection Span

4 yrs

Violations / Inspection

3.0

Avg Penalty / Inspection

$4,913

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 4 years, averaging 3.0 violations per visit. That's $4,913 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

9

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$17,550

Current Penalty Amount

$14,738

Penalty Reduction

16.0%

What this shows Penalties were reduced by $2,812 from the initial assessment of $17,550. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Crown Technology, LLC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Crown Technology, LLC Industry Avg
Inspections 3 2.6
Violations 9 8.0
Total Penalty $14,738 $15,763
Avg Penalty per Inspection $4,913 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Crown Technology, LLC, both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($14,738 here).

Metal Cladding, INC. $14,740 NY Bluetriton $14,740 CA Supertrapp Industries, INC. $14,735 OH New Core, INC. $14,742 TX

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Mortex Products, INC. 3 insp. Fort Worth, TX Abc Coke-Division of Drummond Company 3 insp. Tarrant, AL Eaton Corporation 3 insp. Horseheads, NY Alkon Corporation 3 insp. Fremont, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Metal Cladding, INC.
Lockport, NY
3 inspections $14,740
Bluetriton
Cabazon, CA
3 inspections $14,740
Supertrapp Industries, INC.
Cleveland, OH
2 inspections $14,735
New Core, INC.
Harlingen, TX
2 inspections $14,742
United States Gypsum Company
North Kansas City, MO
2 inspections $14,734

Compare Crown Technology, LLC vs Metal Cladding, INC. side-by-side →

What to do with this record

Use Crown Technology, LLC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Crown Technology, LLC against Metal Cladding, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Crown Technology, LLC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Crown Technology, LLC safe to work at? ▼
Based on OSHA records, Crown Technology, LLC's workplace safety record is mixed, with some compliance concerns. The employer has 9 violations across 3 inspections, including 9 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Crown Technology, LLC have? ▼
Crown Technology, LLC has 9 OSHA violations on record, including 9 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $14,738.
How many OSHA inspections has Crown Technology, LLC had? ▼
Crown Technology, LLC has had 3 OSHA inspections, with the first recorded on 2010-08-27 and the most recent on 2014-11-13. This averages 3.0 violations per inspection.
What is the total penalty amount for Crown Technology, LLC? ▼
Crown Technology, LLC has been assessed $14,738 in current OSHA penalties, reduced from an initial assessment of $17,550 (a 16.0% reduction).
Does Crown Technology, LLC have any serious or willful violations? ▼
Yes. Crown Technology, LLC has 9 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Crown Technology, LLC operate in? ▼
Crown Technology, LLC operates in the Manufacturing sector (NAICS code 325211). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Crown Technology, LLC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Crown Technology, LLC ranks #24,558 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Crown Technology, LLC's safety record compare to industry average? ▼
Crown Technology, LLC's total OSHA penalty of $14,738 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, United States Gypsum Company in North Kansas City, MO is a similar manufacturing employer with $14,734 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.