PlainWorker
Employers › UT

Manufacturing · Draper, UT

Cottonwood Mill and Cabinet, INC.

According to OSHA enforcement records (2010–2026), Cottonwood Mill and Cabinet, INC. ranks #61,804 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 8 violations across 2 inspections.

Lower half by penalty75% serious
$3,973
OSHA penalties
8
Violations cited
2
OSHA inspections
#61,804
of 99,447 penalized employers

Cottonwood Mill and Cabinet, INC. in Draper, UT has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,973. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Cottonwood Mill and Cabinet, INC. 2 times across a longer 9-year span, an infrequent cadence. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #61,804 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Wazee Crane LLC in Broomfield, CO is another manufacturing employer with 2 OSHA inspections on record and $3,972 in current penalties.

4.0
violations per inspection
75.0%
of violations were serious
#61,804
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 8 violations across 2 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Cottonwood Mill and Cabinet, INC. runs well below peers (0.25x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,973 Top 38% most affordable more affordable than 62% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Cottonwood Mill and Cabinet, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.01.69.116.523.931.4OSHA inspectionsViolations citedTAYLOR FARMS NEW JER…, OSHA inspections: 2 · Violations cited: 21UGN, INC., OSHA inspections: 2 · Violations cited: 12PINNACLE MARBLE & GR…, OSHA inspections: 2 · Violations cited: 22HIXSON LUMBER COMPAN…, OSHA inspections: 2 · Violations cited: 8E.J. BROOKS, OSHA inspections: 2 · Violations cited: 20CROWN POLY, INC., OSHA inspections: 2 · Violations cited: 21PACKAGING CORPORATIO…, OSHA inspections: 2 · Violations cited: 10SAGER CREEK VEGETABL…, OSHA inspections: 2 · Violations cited: 24PRESTIGE MARBLE & GR…, OSHA inspections: 2 · Violations cited: 30SANTOS BAKERY, OSHA inspections: 2 · Violations cited: 9GWS TOOL GROUP DBA A…, OSHA inspections: 2 · Violations cited: 21L A. PILLOW & FIBER,…, OSHA inspections: 2 · Violations cited: 5EAST BAKING COMPANY …, OSHA inspections: 2 · Violations cited: 6EVERGREEN PLASTICS, …, OSHA inspections: 2 · Violations cited: 22BOTTLING GROUP, LLC.…, OSHA inspections: 2 · Violations cited: 10BUDZAR INDUSTRIES, OSHA inspections: 2 · Violations cited: 24BWAY CORPORATION DBA…, OSHA inspections: 2 · Violations cited: 3TEXAS STEEL CONVERSI…, OSHA inspections: 2 · Violations cited: 13LIGNETICS GROUP, OSHA inspections: 2 · Violations cited: 15QUIKRETE CALIFORNIA,…, OSHA inspections: 2 · Violations cited: 3Cottonwood Mill and …, OSHA inspections: 2 · Violations cited: 8
Cottonwood Mill and Cabinet, INC. has 2 OSHA inspections on record and 8 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Cottonwood Mill and Cabinet, INC. in the Manufacturing enforcement ledger

Among 35,243 Manufacturing employers with OSHA penalties on file, Cottonwood Mill and Cabinet, INC. ranks #25,216 at $3,973 current penalty.

How Cottonwood Mill and Cabinet, INC. Compares

Cottonwood Mill and Cabinet, INC.'s 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.25x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-01-06

Last Inspection

2025-11-06

Inspection Span

9 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$1,987

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 9 years, averaging 4.0 violations per visit. That's $1,987 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

75.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

25.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$7,945

Current Penalty Amount

$3,973

Penalty Reduction

50.0%

What this shows Penalties were reduced by $3,972 from the initial assessment of $7,945. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Cottonwood Mill and Cabinet, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Cottonwood Mill and Cabinet, INC. Industry Avg
Inspections 2 2.6
Violations 8 8.0
Total Penalty $3,973 $15,763
Avg Penalty per Inspection $1,987 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Cottonwood Mill and Cabinet, INC., both outside UT so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,973 here).

Hooker Furnishing Corporation $3,973 VA Safe-T-Pull, INC. $3,973 ND Wazee Crane LLC $3,972 CO Lee Plastics INC. $3,972 MA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Taylor Farms New Jersey, INC. 2 insp. Swedesboro, NJ Ugn, INC. 2 insp. Monroe, OH Pinnacle Marble & Granite, INC. 2 insp. Dallas, TX Hixson Lumber Company, LLC 2 insp. Rison, AR

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Hooker Furnishing Corporation
Bedford, VA
2 inspections $3,973
Safe-T-Pull, INC.
Park River, ND
2 inspections $3,973
Wazee Crane LLC
Broomfield, CO
2 inspections $3,972
Lee Plastics INC.
Sterling, MA
2 inspections $3,972
Kutzner Manufacturing CO
Telford, PA
2 inspections $3,972

Compare Cottonwood Mill and Cabinet, INC. vs Hooker Furnishing Corporation side-by-side →

What to do with this record

Use Cottonwood Mill and Cabinet, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Cottonwood Mill and Cabinet, INC. against Hooker Furnishing Corporation, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Cottonwood Mill and Cabinet, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Cottonwood Mill and Cabinet, INC. safe to work at? ▼
Based on OSHA records, Cottonwood Mill and Cabinet, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Cottonwood Mill and Cabinet, INC. have? ▼
Cottonwood Mill and Cabinet, INC. has 8 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,973.
How many OSHA inspections has Cottonwood Mill and Cabinet, INC. had? ▼
Cottonwood Mill and Cabinet, INC. has had 2 OSHA inspections, with the first recorded on 2017-01-06 and the most recent on 2025-11-06. This averages 4.0 violations per inspection.
What is the total penalty amount for Cottonwood Mill and Cabinet, INC.? ▼
Cottonwood Mill and Cabinet, INC. has been assessed $3,973 in current OSHA penalties, reduced from an initial assessment of $7,945 (a 50.0% reduction).
Does Cottonwood Mill and Cabinet, INC. have any serious or willful violations? ▼
Yes. Cottonwood Mill and Cabinet, INC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Cottonwood Mill and Cabinet, INC. operate in? ▼
Cottonwood Mill and Cabinet, INC. operates in the Manufacturing sector (NAICS code 337110). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Cottonwood Mill and Cabinet, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Cottonwood Mill and Cabinet, INC. ranks #61,804 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Cottonwood Mill and Cabinet, INC.'s safety record compare to industry average? ▼
Cottonwood Mill and Cabinet, INC.'s total OSHA penalty of $3,973 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Wazee Crane LLC in Broomfield, CO is a similar manufacturing employer with $3,972 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.