PlainWorker
Employers › TX

Manufacturing · Round Rock, TX

Cortec Precision Sheetmetal, INC.

According to OSHA enforcement records (2010–2026), Cortec Precision Sheetmetal, INC. has a concerning safety record: 7 violations across 2 inspections. See the full breakdown below.

Top 25% by penalty86% serious
$20,408
OSHA penalties
7
Violations cited
2
OSHA inspections
#17,122
of 100,495 penalized employers

Cortec Precision Sheetmetal, INC. in Round Rock, TX has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $20,408. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Cortec Precision Sheetmetal, INC. 2 times across a longer 5-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Zimmerman Manufacturing, LLC in New Holland, PA is another manufacturing employer with 2 OSHA inspections on record and $20,412 in current penalties.

3.5
violations per inspection
85.7%
of violations were serious
83%
of penalized employers rank lower

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Cortec Precision Sheetmetal, INC. runs moderately above peers (1.3x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$20,408 Bottom 17% least affordable more affordable than 17% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Cortec Precision Sheetmetal, INC.

The federal enforcement record for Cortec Precision Sheetmetal, INC. in Round Rock, TX includes 2 OSHA inspections and 7 violations, translating to 3.50 violations per inspection. Of those violations, 6 (85.7%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $15,680 in initial penalties against this employer, later adjusted to a current total of $20,408 - no reduction from the original assessment. Average penalty per inspection works out to $10,204. Against the Manufacturing industry average of $15,410 per employer, this record runs moderately above peers (1.3x the sector average).

Inspection activity spans from 2012-01-25 to 2016-11-08, a window of roughly 5 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2012-01-25

Last Inspection

2016-11-08

Inspection Span

5 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$10,204

Industry Avg / Inspection

$6,092

What this shows 2 inspections over 5 years, averaging 3.5 violations per visit. That's $10,204 per inspection vs. the Manufacturing average of $6,092.

Enforcement detail

Violation Breakdown

6

Serious

85.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$15,680

Current Penalty Amount

$20,408

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Manufacturing

How Cortec Precision Sheetmetal, INC. compares to the Manufacturing sector, which has 45,665 employers tracked by PlainWorker.

Metric Cortec Precision Sheetmetal, INC. Industry Avg
Inspections 2 2.5
Violations 7 7.8
Total Penalty $20,408 $15,410
Avg Penalty per Inspection $10,204 $6,092
View all 45,665 employers in Manufacturing →

Nearby & Similar Employers in Manufacturing

Prodigy Boats LLC
Jasper, GA
4 inspections $20,408
Nepw Logistics, INC.
Scarborough, ME
4 inspections $20,406
LSC Communications US, INC
Menasha, WI
2 inspections $20,412
Zimmerman Manufacturing, LLC
New Holland, PA
2 inspections $20,412
Lear Corporation
Arlington, TX
10 inspections $15,838

Compare Cortec Precision Sheetmetal, INC. vs Prodigy Boats LLC side-by-side →

Frequently Asked Questions

Is Cortec Precision Sheetmetal, INC. safe to work at? ▼
Based on OSHA records, Cortec Precision Sheetmetal, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Cortec Precision Sheetmetal, INC. have? ▼
Cortec Precision Sheetmetal, INC. has 7 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $20,408.
How many OSHA inspections has Cortec Precision Sheetmetal, INC. had? ▼
Cortec Precision Sheetmetal, INC. has had 2 OSHA inspections, with the first recorded on 2012-01-25 and the most recent on 2016-11-08. This averages 3.5 violations per inspection.
What is the total penalty amount for Cortec Precision Sheetmetal, INC.? ▼
Cortec Precision Sheetmetal, INC. has been assessed $20,408 in current OSHA penalties.
Does Cortec Precision Sheetmetal, INC. have any serious or willful violations? ▼
Yes. Cortec Precision Sheetmetal, INC. has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Cortec Precision Sheetmetal, INC. operate in? ▼
Cortec Precision Sheetmetal, INC. operates in the Manufacturing sector (NAICS code 332116). This industry has 45,665 employers tracked by PlainWorker, with 115,522 total OSHA inspections and $703.72M in cumulative penalties.
How does Cortec Precision Sheetmetal, INC.'s safety record compare to industry average? ▼
Cortec Precision Sheetmetal, INC.'s total OSHA penalty of $20,408 is above the Manufacturing industry average of $15,410 per employer (1.3x the average). The employer has 2 inspections compared to the industry average of 2.5 per employer. For a direct comparison, Zimmerman Manufacturing, LLC in New Holland, PA is a similar manufacturing employer with $20,412 in current penalties.

Explore PlainWorker

Manufacturing Industry

All 45,665 employers in this sector
Employers in TX

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Cortec Precision Sheetmetal, INC.'s record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.