Construction · Tamuning, GU
Core Tech International Corporation
According to OSHA enforcement records (2010–2026), Core Tech International Corporation ranks #55,488 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 5 violations across 6 inspections.
- $5,000
- OSHA penalties
- 5
- Violations cited
- 6
- OSHA inspections
- #55,488
- of 99,447 penalized employers
Core Tech International Corporation in Tamuning, GU has been the subject of 6 OSHA workplace inspections and 5 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $5,000. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.
The record in one line
OSHA has inspected Core Tech International Corporation 6 times across a longer 15-year span, an infrequent cadence. These inspections resulted in 5 violations, averaging 0.8 per inspection, on the lighter side. According to OSHA enforcement records, its total current penalty ranks #55,488 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 3 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs well above peers (3.0x the sector average) on inspection frequency. For comparison, Marco Contractors, INC. in Owensboro, KY is another construction employer with 2 OSHA inspections on record and $5,000 in current penalties.
- 0.8
- violations per inspection
- 60.0%
- of violations were serious
- #55,488
- of 99,447 penalized employers
Compliance score
- C OSHA safety compliance: 5 violations across 6 OSHA inspections (0.8 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.
Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.
How this employer compares on OSHA penalties
Total current penalty vs the Construction per-employer average
- Core Tech Internationa…
Core Tech International Corporation
$5,000 in penalties
- Construction avg
Construction industry average (per employer)
$6,767 in penalties
What this shows Core Tech International Corporation runs moderately below peers (0.7x the sector average) in total OSHA penalties.
Where this penalty ranks nationally
Total current OSHA penalty vs every U.S. employer with a nonzero penalty
$5,000 Top 44% most affordable more affordable than 56% of 99,447 U.S. employers with a penalty
Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.
Source U.S. Department of Labor, OSHA enforcement extracts · 2026
Does more inspection scrutiny mean more findings?
Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Core Tech International Corporation.
Core Tech International Corporation in the Construction enforcement ledger
Among 33,222 Construction employers with OSHA penalties on file, Core Tech International Corporation ranks #16,612 at $5,000 current penalty.
How Core Tech International Corporation Compares
Core Tech International Corporation's 0.83 violations per inspection compares to the Construction sector average of 3.3 violations per employer.
Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).
Enforcement detail
OSHA Inspection History
Total Inspections
6
First Inspection
2010-01-11
Last Inspection
2025-05-14
Inspection Span
15 yrs
Violations / Inspection
0.8
Avg Penalty / Inspection
$833
Industry Avg / Inspection
$3,361
What this shows 6 inspections over 15 years, averaging 0.8 violations per visit. That's $833 per inspection vs. the Construction average of $3,361.
Enforcement detail
Violation Breakdown
3
Serious
60.0% of total
0
Willful
0.0% of total
1
Repeat
20.0% of total
1
Other-Than-Serious
20.0% of total
What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.
Enforcement detail
Penalty Analysis
Initial Penalty Assessed
$5,600
Current Penalty Amount
$5,000
Penalty Reduction
10.7%
What this shows Penalties were reduced by $600 from the initial assessment of $5,600. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.
Industry Safety Context: Construction
How Core Tech International Corporation compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.
| Metric | Core Tech International Corporation | Industry Avg |
|---|---|---|
| Inspections | 6 | 2.0 |
| Violations | 5 | 3.3 |
| Total Penalty | $5,000 | $6,767 |
| Avg Penalty per Inspection | $833 | $3,361 |
Nationwide Construction peers with similar penalties or inspection counts
Two OSHA-record peer sets for Core Tech International Corporation, both outside GU so the neighborhoods are not geographic containment.
Similar current OSHA penalty
Nearest same-sector employers by current assessed penalty ($5,000 here).
Similar OSHA inspection count
Same-sector employers with a comparable inspection history outside this state (6 inspections here).
Nearby & Similar Employers in Construction
Showing 5 of 61259 other employers tracked in this sector.
Compare Core Tech International Corporation vs The G. B. Group, INC. side-by-side →
What to do with this record
Use Core Tech International Corporation's enforcement history as one data point, not the whole picture.
- A single employer's record can look unusual in isolation. Compare Core Tech International Corporation against The G. B. Group, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
- See whether Core Tech International Corporation's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
- Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers
Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.
Frequently Asked Questions
Is Core Tech International Corporation safe to work at? ▼
How many OSHA violations does Core Tech International Corporation have? ▼
How many OSHA inspections has Core Tech International Corporation had? ▼
What is the total penalty amount for Core Tech International Corporation? ▼
Does Core Tech International Corporation have any serious or willful violations? ▼
What industry does Core Tech International Corporation operate in? ▼
Where does Core Tech International Corporation rank nationally on OSHA penalties? ▼
How does Core Tech International Corporation's safety record compare to industry average? ▼
Data Sources & Methodology ▼
Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).
Source: OSHA Enforcement Data
Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.
Source: Wage and Hour Division (WHD)
Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.
Employer Matching
Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.