Manufacturing · Traverse City, MI

Cone Drive Operations INC

According to OSHA enforcement records (2010–2026), Cone Drive Operations INC ranks #59,778 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 7 violations across 3 inspections.

Lower half by penalty86% serious
$4,250
OSHA penalties
7
Violations cited
3
OSHA inspections
#59,778
of 99,447 penalized employers

Cone Drive Operations INC in Traverse City, MI has been the subject of 3 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $4,250. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Cone Drive Operations INC 3 times across a longer 10-year span, an infrequent cadence. These inspections resulted in 7 violations, averaging 2.3 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #59,778 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 6 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, JE Putt Trucking in Bainbridge, PA is another manufacturing employer with 0 OSHA inspections on record and $0 in current penalties.

2.3
violations per inspection
85.7%
of violations were serious
#59,778
of 99,447 penalized employers

Compliance score

D 56/100
  • D OSHA safety compliance: 7 violations across 3 OSHA inspections (2.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Cone Drive Operations INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Cone Drive Operations INC runs well below peers (0.27x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$4,250 Top 40% most affordable more affordable than 60% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Cone Drive Operations INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.02.511.019.528.036.5OSHA inspectionsViolations citedUNITED HOSPITAL SUPP…, OSHA inspections: 3 · Violations cited: 21GERMAN PELLETS OF TE…, OSHA inspections: 3 · Violations cited: 13RBC INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 35SCHAEFFLER TRANSMISS…, OSHA inspections: 3 · Violations cited: 10THE ATLAS GROUP, OSHA inspections: 3 · Violations cited: 6BELL WOODEN PRODUCTS…, OSHA inspections: 3 · Violations cited: 18GEM INDUSTRIES, INC., OSHA inspections: 3 · Violations cited: 19UNYTITE, INC., OSHA inspections: 3 · Violations cited: 8OSHKOSH DOOR COMPANY, OSHA inspections: 3 · Violations cited: 21BELMONT SAUSAGE COMP…, OSHA inspections: 3 · Violations cited: 4HARTZELL FAN, INC., OSHA inspections: 3 · Violations cited: 17T3 MANUFACTURING, INC., OSHA inspections: 3 · Violations cited: 22CITY BREWING COMPANY…, OSHA inspections: 3 · Violations cited: 7INNOVAR STRUCTURES, …, OSHA inspections: 3 · Violations cited: 18ALERIS ROLLED PRODUC…, OSHA inspections: 3 · Violations cited: 13MACROCAP LABS, INC., OSHA inspections: 3 · Violations cited: 10ENKEI FLORIDA, INC., OSHA inspections: 3 · Violations cited: 16TYOGA CONTAINER COMP…, OSHA inspections: 3 · Violations cited: 8HYUNDAI TRANSYS GEOR…, OSHA inspections: 3 · Violations cited: 5KIMCHUK INC, OSHA inspections: 3 · Violations cited: 26Cone Drive Operation…, OSHA inspections: 3 · Violations cited: 7
Cone Drive Operations INC has 3 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Cone Drive Operations INC in the Manufacturing enforcement ledger

Manufacturing sector: Cone Drive Operations INC is the #24,558 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($4,250).

How Cone Drive Operations INC Compares

Cone Drive Operations INC's 2.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.27x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2013-02-14

Last Inspection

2022-11-01

Inspection Span

10 yrs

Violations / Inspection

2.3

Avg Penalty / Inspection

$1,417

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 10 years, averaging 2.3 violations per visit. That's $1,417 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

6

Serious

85.7% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

14.3% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$8,500

Current Penalty Amount

$4,250

Penalty Reduction

50.0%

What this shows Penalties were reduced by $4,250 from the initial assessment of $8,500. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Cone Drive Operations INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Cone Drive Operations INC Industry Avg
Inspections 3 2.6
Violations 7 8.0
Total Penalty $4,250 $15,763
Avg Penalty per Inspection $1,417 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Cone Drive Operations INC, both outside MI so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Cone Drive Operations INC vs JE Putt Trucking side-by-side →

What to do with this record

Use Cone Drive Operations INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Cone Drive Operations INC against JE Putt Trucking, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Cone Drive Operations INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Cone Drive Operations INC safe to work at?
Based on OSHA records, Cone Drive Operations INC's workplace safety record is mixed, with some compliance concerns. The employer has 7 violations across 3 inspections, including 6 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Cone Drive Operations INC have?
Cone Drive Operations INC has 7 OSHA violations on record, including 6 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $4,250.
How many OSHA inspections has Cone Drive Operations INC had?
Cone Drive Operations INC has had 3 OSHA inspections, with the first recorded on 2013-02-14 and the most recent on 2022-11-01. This averages 2.3 violations per inspection.
What is the total penalty amount for Cone Drive Operations INC?
Cone Drive Operations INC has been assessed $4,250 in current OSHA penalties, reduced from an initial assessment of $8,500 (a 50.0% reduction).
Does Cone Drive Operations INC have any serious or willful violations?
Yes. Cone Drive Operations INC has 6 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Cone Drive Operations INC operate in?
Cone Drive Operations INC operates in the Manufacturing sector (NAICS code 333612). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Cone Drive Operations INC rank nationally on OSHA penalties?
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Cone Drive Operations INC ranks #59,778 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Cone Drive Operations INC's safety record compare to industry average?
Cone Drive Operations INC's total OSHA penalty of $4,250 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, JE Putt Trucking in Bainbridge, PA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.