PlainWorker
Employers › TX

Wholesale Trade · Houston, TX

Computerized Millwork Services INC.

According to OSHA enforcement records (2010–2026), Computerized Millwork Services INC. ranks #15,521 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Top 25% by penalty57% serious
$22,182
OSHA penalties
7
Violations cited
2
OSHA inspections
#15,521
of 99,447 penalized employers

Computerized Millwork Services INC. in Houston, TX has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $22,182. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Computerized Millwork Services INC. 2 times over 2 years, roughly annually. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #15,521 of 99,447 penalized U.S. employers (the top quarter of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Westland Floral CO Carpinteria INC in Carpinteria, CA is another wholesale trade employer with 2 OSHA inspections on record and $22,250 in current penalties.

3.5
violations per inspection
57.1%
of violations were serious
#15,521
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows Computerized Millwork Services INC. runs well above peers (2.4x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$22,182 Bottom 16% least affordable more affordable than 16% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Wholesale Trade employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Computerized Millwork Services INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.110.52131.441.9OSHA inspectionsViolations citedFERRARO FOODS, INC., OSHA inspections: 2 · Violations cited: 8ALLEN BROTHERS 1893,…, OSHA inspections: 2 · Violations cited: 5PREMIER METAL RECYCL…, OSHA inspections: 2 · Violations cited: 40PARIS PRODUCE COMPAN…, OSHA inspections: 2 · Violations cited: 8SCHMALZ'S EUROPEAN P…, OSHA inspections: 2 · Violations cited: 4JULIUS SILVERT, INC., OSHA inspections: 2 · Violations cited: 4SALT CITY, INC., OSHA inspections: 2 · Violations cited: 7R PLANET EARTH, OSHA inspections: 2 · Violations cited: 2J & S Wholesale & Re…, OSHA inspections: 2 · Violations cited: 15NEW YORK GRAPHIC SOC…, OSHA inspections: 2 · Violations cited: 20JOSHEN PAPER & PACKA…, OSHA inspections: 2 · Violations cited: 7BOBBY'S AUTO PARTS, …, OSHA inspections: 2 · Violations cited: 11CYCLE TEX, INC, OSHA inspections: 2 · Violations cited: 4AGGREGATE INDUSTRIES…, OSHA inspections: 2 · Violations cited: 4BUDGET AUTO WRECKING, OSHA inspections: 2 · Violations cited: 6DUDA ENERGY, LLC, OSHA inspections: 2 · Violations cited: 5WINZER CORPORATION, OSHA inspections: 2 · Violations cited: 8BARNETT IMPLEMENT CO…, OSHA inspections: 2 · Violations cited: 5OUTLET TIRE & SERVIC…, OSHA inspections: 2 · Violations cited: 15PROTEK WINE, INC., OSHA inspections: 2 · Violations cited: 8Computerized Millwor…, OSHA inspections: 2 · Violations cited: 7
Computerized Millwork Services INC. has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Wholesale Trade peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Computerized Millwork Services INC. in the Wholesale Trade enforcement ledger

Among 4,429 Wholesale Trade employers with OSHA penalties on file, Computerized Millwork Services INC. ranks #699 at $22,182 current penalty.

How Computerized Millwork Services INC. Compares

Computerized Millwork Services INC.'s 3.50 violations per inspection compares to the Wholesale Trade sector average of 5.5 violations per employer.

Against the Wholesale Trade industry average of $9,112 per employer, this employer's current OSHA penalty runs well above peers (2.4x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2021-04-12

Last Inspection

2023-01-25

Inspection Span

2 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$11,091

Industry Avg / Inspection

$4,665

What this shows 2 inspections over 2 years, averaging 3.5 violations per visit. That's $11,091 per inspection vs. the Wholesale Trade average of $4,665.

Enforcement detail

Violation Breakdown

4

Serious

57.1% of total

0

Willful

0.0% of total

1

Repeat

14.3% of total

2

Other-Than-Serious

28.6% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$33,328

Current Penalty Amount

$22,182

Penalty Reduction

33.4%

What this shows Penalties were reduced by $11,146 from the initial assessment of $33,328. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How Computerized Millwork Services INC. compares to the Wholesale Trade sector, which has 6,881 employers tracked by PlainWorker.

Metric Computerized Millwork Services INC. Industry Avg
Inspections 2 2.0
Violations 7 5.5
Total Penalty $22,182 $9,112
Avg Penalty per Inspection $11,091 $4,665
View all 6,881 employers in Wholesale Trade →

Nationwide Wholesale Trade peers with similar penalties or inspection counts

Two OSHA-record peer sets for Computerized Millwork Services INC., both outside TX so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($22,182 here).

L & D Trucking and Scrap, INC. $22,182 AL Julius Silvert, INC. $22,190 PA Westland Floral CO Carpinteria INC $22,250 CA Zaloudek Grain Company $22,250 OK

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Ferraro Foods, INC. 2 insp. Piscataway, NJ Allen Brothers 1893, LLC 2 insp. Chicago, IL Premier Metal Recycling, INC. 2 insp. Chicago, IL Paris Produce Company INC. 2 insp. Pleasantville, NJ

Nearby & Similar Employers in Wholesale Trade

Showing 5 of 6880 other employers tracked in this sector.

L & D Trucking and Scrap, INC.
Theodore, AL
3 inspections $22,182
Julius Silvert, INC.
Philadelphia, PA
2 inspections $22,190
Westland Floral CO Carpinteria INC
Carpinteria, CA
2 inspections $22,250
Zaloudek Grain Company
Kremlin, OK
2 inspections $22,250
Lamb & Associates Packaging, INC.
Maumelle, AR
2 inspections $22,092

Compare Computerized Millwork Services INC. vs L & D Trucking and Scrap, INC. side-by-side →

What to do with this record

Use Computerized Millwork Services INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Computerized Millwork Services INC. against L & D Trucking and Scrap, INC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Computerized Millwork Services INC.'s inspection and penalty record is typical for Wholesale Trade or an outlier against the sector's own average. View the Wholesale Trade sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Computerized Millwork Services INC. safe to work at? ▼
Based on OSHA records, Computerized Millwork Services INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 4 serious violations. Compared to Wholesale Trade industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Computerized Millwork Services INC. have? ▼
Computerized Millwork Services INC. has 7 OSHA violations on record, including 4 serious, 0 willful, and 1 repeat violations. The total current penalty amount is $22,182.
How many OSHA inspections has Computerized Millwork Services INC. had? ▼
Computerized Millwork Services INC. has had 2 OSHA inspections, with the first recorded on 2021-04-12 and the most recent on 2023-01-25. This averages 3.5 violations per inspection.
What is the total penalty amount for Computerized Millwork Services INC.? ▼
Computerized Millwork Services INC. has been assessed $22,182 in current OSHA penalties, reduced from an initial assessment of $33,328 (a 33.4% reduction).
Does Computerized Millwork Services INC. have any serious or willful violations? ▼
Yes. Computerized Millwork Services INC. has 4 serious violations, and 1 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Computerized Millwork Services INC. operate in? ▼
Computerized Millwork Services INC. operates in the Wholesale Trade sector (NAICS code 423310). This industry has 6,881 employers tracked by PlainWorker, with 13,442 total OSHA inspections and $62.70M in cumulative penalties.
Where does Computerized Millwork Services INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Computerized Millwork Services INC. ranks #15,521 (the top quarter of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Computerized Millwork Services INC.'s safety record compare to industry average? ▼
Computerized Millwork Services INC.'s total OSHA penalty of $22,182 is above the Wholesale Trade industry average of $9,112 per employer (2.4x the average). The employer has 2 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Westland Floral CO Carpinteria INC in Carpinteria, CA is a similar wholesale trade employer with $22,250 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.