PlainWorker
Employers › OH

Manufacturing · Mentor, OH

Component Repair Technologies INC.

According to OSHA enforcement records (2010–2026), Component Repair Technologies INC. ranks #37,908 of 99,447 penalized U.S. employers by total current penalty, with a relatively clean safety record: 2 violations across 2 inspections.

Upper half by penalty50% serious
$9,054
OSHA penalties
2
Violations cited
2
OSHA inspections
#37,908
of 99,447 penalized employers

Component Repair Technologies INC. in Mentor, OH has been the subject of 2 OSHA workplace inspections and 2 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $9,054. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Component Repair Technologies INC. 2 times over 1 year - more than twice a year on average. These inspections resulted in 2 violations, averaging 1.0 per inspection. According to OSHA enforcement records, its total current penalty ranks #37,908 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 1 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Tracker Marine LLC in Lebanon, MO is another manufacturing employer with 2 OSHA inspections on record and $9,054 in current penalties.

1.0
violations per inspection
50.0%
of violations were serious
#37,908
of 99,447 penalized employers

Compliance score

C 75/100
  • C OSHA safety compliance: 2 violations across 2 OSHA inspections (1.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Component Repair Technologies INC. runs moderately below peers (0.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$9,054 Bottom 38% least affordable more affordable than 38% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). This entry sits in this band. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Component Repair Technologies INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.00.87.614.521.428.3OSHA inspectionsViolations citedSIMTEK INC., OSHA inspections: 2 · Violations cited: 25ACTION ENGINEERING, …, OSHA inspections: 2 · Violations cited: 27AMPAC MOBILE HOLDING…, OSHA inspections: 2 · Violations cited: 2GALPERTI INC., OSHA inspections: 2 · Violations cited: 12MERCURY PAPER, INC., OSHA inspections: 2 · Violations cited: 14ATG SUPPLY INC., OSHA inspections: 2 · Violations cited: 3BORAL CONCRETE PRODU…, OSHA inspections: 2 · Violations cited: 9SABIC INNOVATIVE PLA…, OSHA inspections: 2 · Violations cited: 5PLASTIC TECHNOLOGIES…, OSHA inspections: 2 · Violations cited: 12SCHULT INDUSTRIES, OSHA inspections: 2 · Violations cited: 8PAK-LITE, INC., OSHA inspections: 2 · Violations cited: 7ALL AMERICAN SPACE S…, OSHA inspections: 2 · Violations cited: 13GAMMA AEROSPACE, OSHA inspections: 2 · Violations cited: 13AZTECA BAKERY LLC, OSHA inspections: 2 · Violations cited: 6AMERICAN PUZZLE COMP…, OSHA inspections: 2 · Violations cited: 5VAL TECH HOLDINGS, I…, OSHA inspections: 2 · Violations cited: 10WATSON MCDANIEL COMP…, OSHA inspections: 2 · Violations cited: 11J. L. CLARK, INC., OSHA inspections: 2 · Violations cited: 3TOUCHMARK, INCORPORA…, OSHA inspections: 2 · Violations cited: 14DIXIE IRON WORKS, LTD., OSHA inspections: 2 · Violations cited: 4Component Repair Tec…, OSHA inspections: 2 · Violations cited: 2
Component Repair Technologies INC. has 2 OSHA inspections on record and 2 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Component Repair Technologies INC. in the Manufacturing enforcement ledger

In Manufacturing, Component Repair Technologies INC. sits at penalty rank #16,889 of 35,243 penalized establishments ($9,054 assessed).

How Component Repair Technologies INC. Compares

Component Repair Technologies INC.'s 1.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.6x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2018-10-11

Last Inspection

2018-12-04

Inspection Span

1 yr

Violations / Inspection

1.0

Avg Penalty / Inspection

$4,527

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 1 year, averaging 1.0 violations per visit. That's $4,527 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

1

Serious

50.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

1

Other-Than-Serious

50.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$18,477

Current Penalty Amount

$9,054

Penalty Reduction

51.0%

What this shows Penalties were reduced by $9,423 from the initial assessment of $18,477. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Component Repair Technologies INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Component Repair Technologies INC. Industry Avg
Inspections 2 2.6
Violations 2 8.0
Total Penalty $9,054 $15,763
Avg Penalty per Inspection $4,527 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Component Repair Technologies INC., both outside OH so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($9,054 here).

Specialty Rolled Metals LLC $9,054 WI Tracker Marine LLC $9,054 MO Olin - Blue Cube Operations, LLC $9,054 LA Michie Corporation $9,054 NH

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

Simtek INC. 2 insp. Amityville, NY Action Engineering, INC. 2 insp. Tucker, GA Ampac Mobile Holdings LLC 2 insp. Mobile, AL Galperti INC. 2 insp. Houston, TX

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Specialty Rolled Metals LLC
Beaver Dam, WI
2 inspections $9,054
Tracker Marine LLC
Lebanon, MO
2 inspections $9,054
Olin - Blue Cube Operations, LLC
Plaquemine, LA
2 inspections $9,054
Michie Corporation
Henniker, NH
3 inspections $9,054
Gates Rubber Company
Poplar Bluff, MO
2 inspections $9,054

Compare Component Repair Technologies INC. vs Specialty Rolled Metals LLC side-by-side →

What to do with this record

Use Component Repair Technologies INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Component Repair Technologies INC. against Specialty Rolled Metals LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Component Repair Technologies INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Component Repair Technologies INC. safe to work at? ▼
Based on OSHA records, Component Repair Technologies INC.'s workplace safety record is relatively clean, with fewer violations than typical. The employer has 2 violations across 2 inspections, including 1 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Component Repair Technologies INC. have? ▼
Component Repair Technologies INC. has 2 OSHA violations on record, including 1 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $9,054.
How many OSHA inspections has Component Repair Technologies INC. had? ▼
Component Repair Technologies INC. has had 2 OSHA inspections, with the first recorded on 2018-10-11 and the most recent on 2018-12-04. This averages 1.0 violations per inspection.
What is the total penalty amount for Component Repair Technologies INC.? ▼
Component Repair Technologies INC. has been assessed $9,054 in current OSHA penalties, reduced from an initial assessment of $18,477 (a 51.0% reduction).
Does Component Repair Technologies INC. have any serious or willful violations? ▼
Yes. Component Repair Technologies INC. has 1 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Component Repair Technologies INC. operate in? ▼
Component Repair Technologies INC. operates in the Manufacturing sector (NAICS code 336412). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Component Repair Technologies INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Component Repair Technologies INC. ranks #37,908 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Component Repair Technologies INC.'s safety record compare to industry average? ▼
Component Repair Technologies INC.'s total OSHA penalty of $9,054 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Tracker Marine LLC in Lebanon, MO is a similar manufacturing employer with $9,054 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.