PlainWorker
Employers › GA

Manufacturing · Marietta, GA

Commercial Stainless Fabricators, INC.

According to OSHA enforcement records (2010–2026), Commercial Stainless Fabricators, INC. ranks #1,039 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 29 violations across 4 inspections.

Top 1% by penalty48% serious
$138,450
OSHA penalties
29
Violations cited
4
OSHA inspections
#1,039
of 99,447 penalized employers

Commercial Stainless Fabricators, INC. in Marietta, GA has been the subject of 4 OSHA workplace inspections and 29 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $138,450. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Commercial Stainless Fabricators, INC. 4 times over 6 years, roughly once every couple of years. These inspections resulted in 29 violations, averaging 7.3 per inspection - a notably high rate. According to OSHA enforcement records, its total current penalty ranks #1,039 of 99,447 penalized U.S. employers (the top 1% of penalized employers nationally). Of these, 14 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Voith Hydro in York, PA is another manufacturing employer with 1 OSHA inspection on record and $0 in current penalties.

7.3
violations per inspection
48.3%
of violations were serious
#1,039
of 99,447 penalized employers

Compliance score

F 0/100
  • F OSHA safety compliance: 29 violations across 4 OSHA inspections (7.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How this employer compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Commercial Stainless Fabricators, INC. runs far above peers (8.8x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$138,450 Bottom 1% least affordable more affordable than 1% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Below this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Below this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Below this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Below this entry. $50,000+: 5,150 U.S. employers with a penalty (5%). This entry ($138,450) is well above this band, the chart's rightmost open-ended bucket. This employer: $138,450 $0 $55,000+ every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Commercial Stainless Fabricators, INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both4.04.044.04.0010.521.031.542.0OSHA inspectionsViolations citedSAFEWAY, INC., OSHA inspections: 4 · Violations cited: 22HAGEL METAL FABRICAT…, OSHA inspections: 4 · Violations cited: 18WOOD-MODE LLC, OSHA inspections: 4 · Violations cited: 12LONG FALLS PAPERBOAR…, OSHA inspections: 4 · Violations cited: 26GRAY METAL PRODUCTS …, OSHA inspections: 4 · Violations cited: 17DORSEY TRAILER LLC, OSHA inspections: 4 · Violations cited: 16MANUFACTURING SOLUTI…, OSHA inspections: 4 · Violations cited: 27DENTALEZ ALABAMA, INC., OSHA inspections: 4 · Violations cited: 19ATHENS FOODS INC., OSHA inspections: 4 · Violations cited: 21BARNHARDT MANUFACTUR…, OSHA inspections: 4 · Violations cited: 17WB MANUFACTURING, LLC, OSHA inspections: 4 · Violations cited: 9POCINO FOODS COMPANY, OSHA inspections: 4 · Violations cited: 20ADVANCE PALLET, INCO…, OSHA inspections: 4 · Violations cited: 11BAY WOOD PRODUCTS, I…, OSHA inspections: 4 · Violations cited: 17ROSKAM BAKING COMPAN…, OSHA inspections: 4 · Violations cited: 4DUREX, INC., OSHA inspections: 4 · Violations cited: 4SIMMONS PET FOOD INC., OSHA inspections: 4 · Violations cited: 4PENFLEX CORPORATION, OSHA inspections: 4 · Violations cited: 4CS WIND AMERICA, INC., OSHA inspections: 4 · Violations cited: 1WYLIE STEEL FABRICAT…, OSHA inspections: 4 · Violations cited: 40Commercial Stainless…, OSHA inspections: 4 · Violations cited: 29
Commercial Stainless Fabricators, INC. has 4 OSHA inspections on record and 29 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Commercial Stainless Fabricators, INC. in the Manufacturing enforcement ledger

Manufacturing sector: Commercial Stainless Fabricators, INC. is the #572 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($138,450).

How Commercial Stainless Fabricators, INC. Compares

Commercial Stainless Fabricators, INC.'s 7.25 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs far above peers (8.8x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

4

First Inspection

2015-10-22

Last Inspection

2022-02-09

Inspection Span

6 yrs

Violations / Inspection

7.3

Avg Penalty / Inspection

$34,613

Industry Avg / Inspection

$6,093

What this shows 4 inspections over 6 years, averaging 7.3 violations per visit. That's $34,613 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

14

Serious

48.3% of total

0

Willful

0.0% of total

5

Repeat

17.2% of total

10

Other-Than-Serious

34.5% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$142,637

Current Penalty Amount

$138,450

Penalty Reduction

2.9%

What this shows Penalties were reduced by $4,187 from the initial assessment of $142,637. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Commercial Stainless Fabricators, INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Commercial Stainless Fabricators, INC. Industry Avg
Inspections 4 2.6
Violations 29 8.0
Total Penalty $138,450 $15,763
Avg Penalty per Inspection $34,613 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Commercial Stainless Fabricators, INC., both outside GA so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($138,450 here).

Coreslab Structures, INC $138,426 MO Blue Diamond Steel Casting LLC $138,320 MI Cleary Pallet Sales, INC. $138,188 IL Pyongsan America, INC. $138,136 AL

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (4 inspections here).

Safeway, INC. 4 insp. Denver, CO Hagel Metal Fabrication, INC. 4 insp. East Peoria, IL Wood-Mode LLC 4 insp. Kreamer, PA Long Falls Paperboard LLC 4 insp. Brattleboro, VT

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Coreslab Structures, INC
Marshall, MO
4 inspections $138,426
HPC Hackett Precision Company, Inc.
Nashville, TN
0 inspections $0
Voith Hydro
York, PA
1 inspections $0
Blue Diamond Steel Casting LLC
Pigeon, MI
23 inspections $138,320
La Super Michoacana, Inc.
Austin, TX
0 inspections $0

Compare Commercial Stainless Fabricators, INC. vs Coreslab Structures, INC side-by-side →

What to do with this record

Use Commercial Stainless Fabricators, INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Commercial Stainless Fabricators, INC. against Coreslab Structures, INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Commercial Stainless Fabricators, INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Commercial Stainless Fabricators, INC. safe to work at? ▼
Based on OSHA records, Commercial Stainless Fabricators, INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 29 violations across 4 inspections, including 14 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Commercial Stainless Fabricators, INC. have? ▼
Commercial Stainless Fabricators, INC. has 29 OSHA violations on record, including 14 serious, 0 willful, and 5 repeat violations. The total current penalty amount is $138,450.
How many OSHA inspections has Commercial Stainless Fabricators, INC. had? ▼
Commercial Stainless Fabricators, INC. has had 4 OSHA inspections, with the first recorded on 2015-10-22 and the most recent on 2022-02-09. This averages 7.3 violations per inspection.
What is the total penalty amount for Commercial Stainless Fabricators, INC.? ▼
Commercial Stainless Fabricators, INC. has been assessed $138,450 in current OSHA penalties, reduced from an initial assessment of $142,637 (a 2.9% reduction).
Does Commercial Stainless Fabricators, INC. have any serious or willful violations? ▼
Yes. Commercial Stainless Fabricators, INC. has 14 serious violations, and 5 repeat violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Commercial Stainless Fabricators, INC. operate in? ▼
Commercial Stainless Fabricators, INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Commercial Stainless Fabricators, INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Commercial Stainless Fabricators, INC. ranks #1,039 (the top 1% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Commercial Stainless Fabricators, INC.'s safety record compare to industry average? ▼
Commercial Stainless Fabricators, INC.'s total OSHA penalty of $138,450 is above the Manufacturing industry average of $15,763 per employer (8.8x the average). The employer has 4 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Voith Hydro in York, PA is a similar manufacturing employer with $0 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 4 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.