PlainWorker
Employers › HI

Manufacturing · Waipahu, HI

Commercial Sheetmetal CO. INC.

According to OSHA enforcement records (2010–2026), Commercial Sheetmetal CO. INC. ranks #62,843 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 7 violations across 2 inspections.

Lower half by penalty29% serious
$3,792
OSHA penalties
7
Violations cited
2
OSHA inspections
#62,843
of 99,447 penalized employers

Commercial Sheetmetal CO. INC. in Waipahu, HI has been the subject of 2 OSHA workplace inspections and 7 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $3,792. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Commercial Sheetmetal CO. INC. 2 times over 4 years, roughly once every couple of years. These inspections resulted in 7 violations, averaging 3.5 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #62,843 of 99,447 penalized U.S. employers (the lower half of penalized employers nationally). Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this runs moderately below peers (0.8x the sector average) on inspection frequency. For comparison, Millco Woodworking LLC in Hall, NY is another manufacturing employer with 6 OSHA inspections on record and $3,794 in current penalties.

3.5
violations per inspection
28.6%
of violations were serious
#62,843
of 99,447 penalized employers

Compliance score

F 39/100
  • F OSHA safety compliance: 7 violations across 2 OSHA inspections (3.5 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Commercial Sheetmetal CO. INC. compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Commercial Sheetmetal CO. INC. runs well below peers (0.24x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$3,792 Top 37% most affordable more affordable than 63% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). This entry sits in this band. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Above this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Above this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Commercial Sheetmetal CO. INC..

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both1.92.022.02.03.27.61216.420.8OSHA inspectionsViolations citedEAST WEST SEAFOOD'S,…, OSHA inspections: 2 · Violations cited: 18BLUE CUBE OPERATIONS…, OSHA inspections: 2 · Violations cited: 8LYONDELL BASELL, OSHA inspections: 2 · Violations cited: 5PRIME CONVERTING COR…, OSHA inspections: 2 · Violations cited: 7AUTANA COMPOSITES, LLC, OSHA inspections: 2 · Violations cited: 12AIR-FLO MFG. CO. INC., OSHA inspections: 2 · Violations cited: 11BRAYMAN PRECAST, LLC, OSHA inspections: 2 · Violations cited: 19FREDERICK GOLDMAN INC., OSHA inspections: 2 · Violations cited: 15NORTHWEST CONFECTION…, OSHA inspections: 2 · Violations cited: 12PRECISION COMPACTED …, OSHA inspections: 2 · Violations cited: 13CITGO PETROLEUM CORP…, OSHA inspections: 2 · Violations cited: 4ATHA INTERIOR TRIM, …, OSHA inspections: 2 · Violations cited: 20BRAMLI USA, INC., OSHA inspections: 2 · Violations cited: 9ATKORE INTERNATIONAL, OSHA inspections: 2 · Violations cited: 8BIMBO QSR COLORADO, …, OSHA inspections: 2 · Violations cited: 5GLOBAL PRECISION PAR…, OSHA inspections: 2 · Violations cited: 12KENT FOUNDRY COMPANY, OSHA inspections: 2 · Violations cited: 15PIONEER CUSTOM MOLDI…, OSHA inspections: 2 · Violations cited: 10OLDS PRODUCTS CO. OF…, OSHA inspections: 2 · Violations cited: 8PRIMROSE CANDY COMPANY, OSHA inspections: 2 · Violations cited: 6Commercial Sheetmeta…, OSHA inspections: 2 · Violations cited: 7
Commercial Sheetmetal CO. INC. has 2 OSHA inspections on record and 7 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Commercial Sheetmetal CO. INC. in the Manufacturing enforcement ledger

Manufacturing sector: Commercial Sheetmetal CO. INC. is the #25,558 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($3,792).

How Commercial Sheetmetal CO. INC. Compares

Commercial Sheetmetal CO. INC.'s 3.50 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs well below peers (0.24x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2017-07-21

Last Inspection

2021-03-23

Inspection Span

4 yrs

Violations / Inspection

3.5

Avg Penalty / Inspection

$1,896

Industry Avg / Inspection

$6,093

What this shows 2 inspections over 4 years, averaging 3.5 violations per visit. That's $1,896 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

2

Serious

28.6% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

71.4% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$5,415

Current Penalty Amount

$3,792

Penalty Reduction

30.0%

What this shows Penalties were reduced by $1,623 from the initial assessment of $5,415. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Commercial Sheetmetal CO. INC. compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Commercial Sheetmetal CO. INC. Industry Avg
Inspections 2 2.6
Violations 7 8.0
Total Penalty $3,792 $15,763
Avg Penalty per Inspection $1,896 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Commercial Sheetmetal CO. INC., both outside HI so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($3,792 here).

Harimatec INC $3,792 GA Millco Woodworking LLC $3,794 NY Taggart Enterprises INC. $3,790 CO V & L Tool, LLC $3,795 WI

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (2 inspections here).

East West Seafood's, LLC 2 insp. Seattle, WA Blue Cube Operations LLC 2 insp. Freeport, TX Lyondell Basell 2 insp. LA Porte, TX Prime Converting Corporation 2 insp. Rancho Cucamonga, CA

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Harimatec INC
Duluth, GA
2 inspections $3,792
Absolute Machine
Colorado Springs, CO
0 inspections $0
Empire Specialty Cheese LLC
Conewango Valley, NY
0 inspections $0
Millco Woodworking LLC
Hall, NY
6 inspections $3,794
Taggart Enterprises INC.
Parker, CO
2 inspections $3,790

Compare Commercial Sheetmetal CO. INC. vs Harimatec INC side-by-side →

What to do with this record

Use Commercial Sheetmetal CO. INC.'s enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Commercial Sheetmetal CO. INC. against Harimatec INC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Commercial Sheetmetal CO. INC.'s inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Commercial Sheetmetal CO. INC. safe to work at? ▼
Based on OSHA records, Commercial Sheetmetal CO. INC.'s workplace safety record is concerning, with multiple serious compliance issues. The employer has 7 violations across 2 inspections, including 2 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Commercial Sheetmetal CO. INC. have? ▼
Commercial Sheetmetal CO. INC. has 7 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $3,792.
How many OSHA inspections has Commercial Sheetmetal CO. INC. had? ▼
Commercial Sheetmetal CO. INC. has had 2 OSHA inspections, with the first recorded on 2017-07-21 and the most recent on 2021-03-23. This averages 3.5 violations per inspection.
What is the total penalty amount for Commercial Sheetmetal CO. INC.? ▼
Commercial Sheetmetal CO. INC. has been assessed $3,792 in current OSHA penalties, reduced from an initial assessment of $5,415 (a 30.0% reduction).
Does Commercial Sheetmetal CO. INC. have any serious or willful violations? ▼
Yes. Commercial Sheetmetal CO. INC. has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Commercial Sheetmetal CO. INC. operate in? ▼
Commercial Sheetmetal CO. INC. operates in the Manufacturing sector (NAICS code 332322). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Commercial Sheetmetal CO. INC. rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Commercial Sheetmetal CO. INC. ranks #62,843 (the lower half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Commercial Sheetmetal CO. INC.'s safety record compare to industry average? ▼
Commercial Sheetmetal CO. INC.'s total OSHA penalty of $3,792 is below the Manufacturing industry average of $15,763 per employer. The employer has 2 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Millco Woodworking LLC in Hall, NY is a similar manufacturing employer with $3,794 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.