PlainWorker
Employers › GA

Wholesale Trade · Cochran, GA

Cochran Oil Mill & Ginnery

According to OSHA enforcement records (2010–2026), Cochran Oil Mill & Ginnery has a concerning safety record: 8 violations across 2 inspections. See the full breakdown below.

Top 25% by penalty25% serious
$23,663
OSHA penalties
8
Violations cited
2
OSHA inspections
#14,402
of 100,495 penalized employers

Cochran Oil Mill & Ginnery in Cochran, GA has been the subject of 2 OSHA workplace inspections and 8 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $23,663. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Cochran Oil Mill & Ginnery 2 times over 2 years, roughly annually. These inspections resulted in 8 violations, averaging 4.0 per inspection, above what's typical for a single visit. Its total OSHA penalty ranks in the top quarter of penalized employers nationally. Of these, 2 were classified as serious - indicating hazards that could cause death or serious harm. Against the Wholesale Trade industry average of 2 inspections per employer, this sits roughly in line with peers (1.0x the sector average) on inspection frequency. For comparison, Star Valley Medical Center in Afton, WY is another wholesale trade employer with 0 OSHA inspections on record and $0 in current penalties.

4.0
violations per inspection
25.0%
of violations were serious
86%
of penalized employers rank lower

How Cochran Oil Mill & Ginnery compares on OSHA penalties

Total current penalty vs the Wholesale Trade per-employer average

in penalties

What this shows Cochran Oil Mill & Ginnery runs well above peers (2.6x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$23,663 Bottom 14% least affordable more affordable than 14% of 100,495 U.S. employers with a penalty

$0–$5,000: 44,435 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,628 U.S. employers with a penalty (21%). Below this entry. $10,000–$15,000: 11,165 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,629 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,205 U.S. employers with a penalty (4%). This entry sits in this band. $25,000–$30,000: 2,885 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,052 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,483 U.S. employers with a penalty (1%). Above this entry. $40,000–$45,000: 1,120 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 792 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,101 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

What the Data Says About Cochran Oil Mill & Ginnery

The federal enforcement record for Cochran Oil Mill & Ginnery in Cochran, GA includes 2 OSHA inspections and 8 violations, translating to 4.00 violations per inspection. Of those violations, 2 (25.0%) were classified as serious, 0 (0.0%) as willful, and 0 (0.0%) as repeat. Serious violations denote hazards likely to cause death or serious physical harm; willful and repeat categories indicate intentional disregard or recurrence of previously cited hazards.

OSHA assessed $41,148 in initial penalties against this employer, later adjusted to a current total of $23,663 - a 42.5% reduction. Average penalty per inspection works out to $11,832. Against the Wholesale Trade industry average of $9,023 per employer, this record runs well above peers (2.6x the sector average).

Inspection activity spans from 2024-06-05 to 2026-02-18, a window of roughly 2 years.

Enforcement detail

OSHA Inspection History

Total Inspections

2

First Inspection

2024-06-05

Last Inspection

2026-02-18

Inspection Span

2 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$11,832

Industry Avg / Inspection

$4,678

What this shows 2 inspections over 2 years, averaging 4.0 violations per visit. That's $11,832 per inspection vs. the Wholesale Trade average of $4,678.

Enforcement detail

Violation Breakdown

2

Serious

25.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

6

Other-Than-Serious

75.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$41,148

Current Penalty Amount

$23,663

Penalty Reduction

42.5%

What this shows Penalties were reduced by $17,485 from the initial assessment of $41,148. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Wholesale Trade

How Cochran Oil Mill & Ginnery compares to the Wholesale Trade sector, which has 6,960 employers tracked by PlainWorker.

Metric Cochran Oil Mill & Ginnery Industry Avg
Inspections 2 1.9
Violations 8 5.4
Total Penalty $23,663 $9,023
Avg Penalty per Inspection $11,832 $4,678
View all 6,960 employers in Wholesale Trade →

Nearby & Similar Employers in Wholesale Trade

FRP Engineering Solutions, LLC
Casco, ME
2 inspections $23,664
Gamtex Industries LP
Fort Worth, TX
3 inspections $23,660
Star Valley Medical Center
Afton, WY
0 inspections $0
Margo State Line, INC.
Folkston, GA
2 inspections $23,697
Cooperative Supply, INC
Leigh, NE
2 inspections $23,698

Compare Cochran Oil Mill & Ginnery vs FRP Engineering Solutions, LLC side-by-side →

Frequently Asked Questions

Is Cochran Oil Mill & Ginnery safe to work at? ▼
Based on OSHA records, Cochran Oil Mill & Ginnery's workplace safety record is concerning, with multiple serious compliance issues. The employer has 8 violations across 2 inspections, including 2 serious violations. Compared to Wholesale Trade industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Cochran Oil Mill & Ginnery have? ▼
Cochran Oil Mill & Ginnery has 8 OSHA violations on record, including 2 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $23,663.
How many OSHA inspections has Cochran Oil Mill & Ginnery had? ▼
Cochran Oil Mill & Ginnery has had 2 OSHA inspections, with the first recorded on 2024-06-05 and the most recent on 2026-02-18. This averages 4.0 violations per inspection.
What is the total penalty amount for Cochran Oil Mill & Ginnery? ▼
Cochran Oil Mill & Ginnery has been assessed $23,663 in current OSHA penalties, reduced from an initial assessment of $41,148 (a 42.5% reduction).
Does Cochran Oil Mill & Ginnery have any serious or willful violations? ▼
Yes. Cochran Oil Mill & Ginnery has 2 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Cochran Oil Mill & Ginnery operate in? ▼
Cochran Oil Mill & Ginnery operates in the Wholesale Trade sector (NAICS code 424910). This industry has 6,960 employers tracked by PlainWorker, with 13,424 total OSHA inspections and $62.80M in cumulative penalties.
How does Cochran Oil Mill & Ginnery's safety record compare to industry average? ▼
Cochran Oil Mill & Ginnery's total OSHA penalty of $23,663 is above the Wholesale Trade industry average of $9,023 per employer (2.6x the average). The employer has 2 inspections compared to the industry average of 1.9 per employer. For a direct comparison, Star Valley Medical Center in Afton, WY is a similar wholesale trade employer with $0 in current penalties.

Explore PlainWorker

Wholesale Trade Industry

All 6,960 employers in this sector
Employers in GA

All inspected employers in this state
Safety Rankings

Most penalized, repeat violators & more

What to check next

Cochran Oil Mill & Ginnery's record is one establishment in a larger pattern. Use it as a research checklist, not a verdict on the employer overall.

These figures are the federal enforcement record on file and reflect past inspections, not a statement about current workplace conditions. See the disclaimer for how to read them.

Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 2 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.