PlainWorker
Employers › MO

Construction · Maryland Heights, MO

CNC Construction INC

According to OSHA enforcement records (2010–2026), CNC Construction INC ranks #10,292 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 3 inspections.

Top 10% by penalty58% serious
$30,499
OSHA penalties
12
Violations cited
3
OSHA inspections
#10,292
of 99,447 penalized employers

CNC Construction INC in Maryland Heights, MO has been the subject of 3 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $30,499. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected CNC Construction INC 3 times over 1 year - more than twice a year on average. These inspections resulted in 12 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #10,292 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 7 were classified as serious - indicating hazards that could cause death or serious harm. Against the Construction industry average of 2 inspections per employer, this runs moderately above peers (1.5x the sector average) on inspection frequency. For comparison, Jose's Construction in Oklahoma City, OK is another construction employer with 4 OSHA inspections on record and $30,507 in current penalties.

4.0
violations per inspection
58.3%
of violations were serious
#10,292
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 12 violations across 3 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How CNC Construction INC compares on OSHA penalties

Total current penalty vs the Construction per-employer average

in penalties

What this shows CNC Construction INC runs well above peers (4.5x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$30,499 Bottom 10% least affordable more affordable than 10% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). This entry sits in this band. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Construction employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is CNC Construction INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.01.88.214.520.827.1OSHA inspectionsViolations citedUNITED CUSTOM HOMES,…, OSHA inspections: 3 · Violations cited: 7K&F CONSTRUCTION, INC., OSHA inspections: 3 · Violations cited: 13UNITED BUILDERS GROU…, OSHA inspections: 3 · Violations cited: 9GERMAN GUTIERREZ, OSHA inspections: 3 · Violations cited: 12WORMLEY BROTHERS ENT…, OSHA inspections: 3 · Violations cited: 10SRL HOME REPAIR, INC., OSHA inspections: 3 · Violations cited: 16WEBBER, LLC, OSHA inspections: 3 · Violations cited: 6ALEJANDRO JUAREZ PEREZ, OSHA inspections: 3 · Violations cited: 7WEST-TECH CONTRACTIN…, OSHA inspections: 3 · Violations cited: 26FINIX U.S.A. CONSTRU…, OSHA inspections: 3 · Violations cited: 11SOUTH SHORE CONSTRUC…, OSHA inspections: 3 · Violations cited: 7COASTAL ROOFING, INC., OSHA inspections: 3 · Violations cited: 3G & H CONSTRUCTION, OSHA inspections: 3 · Violations cited: 8ABEL FIGUEROA, OSHA inspections: 3 · Violations cited: 6RCD CONTRACTOR, LLC., OSHA inspections: 3 · Violations cited: 7JACK MANGUS MASONRY, OSHA inspections: 3 · Violations cited: 8MAS-CON CORP., OSHA inspections: 3 · Violations cited: 5MOLLY CONSTRUCTION, …, OSHA inspections: 3 · Violations cited: 8DAY MECHANICAL SYSTE…, OSHA inspections: 3 · Violations cited: 9C & C ROAD CONSTRUCT…, OSHA inspections: 3 · Violations cited: 9CNC Construction INC, OSHA inspections: 3 · Violations cited: 12
CNC Construction INC has 3 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Construction peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

CNC Construction INC in the Construction enforcement ledger

Construction sector: CNC Construction INC is the #2,500 heaviest OSHA penalty carrier of 33,222 employers with nonzero fines ($30,499).

How CNC Construction INC Compares

CNC Construction INC's 4.00 violations per inspection compares to the Construction sector average of 3.3 violations per employer.

Against the Construction industry average of $6,767 per employer, this employer's current OSHA penalty runs well above peers (4.5x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2025-03-26

Last Inspection

2025-03-26

Inspection Span

1 yr

Violations / Inspection

4.0

Avg Penalty / Inspection

$10,166

Industry Avg / Inspection

$3,361

What this shows 3 inspections over 1 year, averaging 4.0 violations per visit. That's $10,166 per inspection vs. the Construction average of $3,361.

Enforcement detail

Violation Breakdown

7

Serious

58.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

5

Other-Than-Serious

41.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$30,499

Current Penalty Amount

$30,499

Penalty Reduction

None

What this shows No reduction on record. The current penalty matches the original OSHA assessment.

Industry Safety Context: Construction

How CNC Construction INC compares to the Construction sector, which has 61,260 employers tracked by PlainWorker.

Metric CNC Construction INC Industry Avg
Inspections 3 2.0
Violations 12 3.3
Total Penalty $30,499 $6,767
Avg Penalty per Inspection $10,166 $3,361
View all 61,260 employers in Construction →

Nationwide Construction peers with similar penalties or inspection counts

Two OSHA-record peer sets for CNC Construction INC, both outside MO so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($30,499 here).

Jose Conejo $30,498 PA Jose's Construction $30,507 OK Charles Pisik $30,486 NY Richard Roth $30,528 PA

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

United Custom Homes, LLC 3 insp. Naperville, IL K&F Construction, INC. 3 insp. Morgantown, WV United Builders Group CO. 3 insp. Chicago, IL German Gutierrez 3 insp. Oak Creek, WI

Nearby & Similar Employers in Construction

Showing 5 of 61259 other employers tracked in this sector.

Jose Conejo
Irwin, PA
2 inspections $30,498
AMK & PCWP Enterprises
San Juan, PR
0 inspections $0
Jose's Construction
Oklahoma City, OK
4 inspections $30,507
Charles Pisik
Baldwinsville, NY
2 inspections $30,486
Lake Excavation & Redi Mix
Oshkosh, NE
0 inspections $0

Compare CNC Construction INC vs Jose Conejo side-by-side →

What to do with this record

Use CNC Construction INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare CNC Construction INC against Jose Conejo, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether CNC Construction INC's inspection and penalty record is typical for Construction or an outlier against the sector's own average. View the Construction sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is CNC Construction INC safe to work at? ▼
Based on OSHA records, CNC Construction INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 3 inspections, including 7 serious violations. Compared to Construction industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does CNC Construction INC have? ▼
CNC Construction INC has 12 OSHA violations on record, including 7 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $30,499.
How many OSHA inspections has CNC Construction INC had? ▼
CNC Construction INC has had 3 OSHA inspections, with the first recorded on 2025-03-26 and the most recent on 2025-03-26. This averages 4.0 violations per inspection.
What is the total penalty amount for CNC Construction INC? ▼
CNC Construction INC has been assessed $30,499 in current OSHA penalties.
Does CNC Construction INC have any serious or willful violations? ▼
Yes. CNC Construction INC has 7 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does CNC Construction INC operate in? ▼
CNC Construction INC operates in the Construction sector (NAICS code 238160). This industry has 61,260 employers tracked by PlainWorker, with 123,354 total OSHA inspections and $414.57M in cumulative penalties.
Where does CNC Construction INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, CNC Construction INC ranks #10,292 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does CNC Construction INC's safety record compare to industry average? ▼
CNC Construction INC's total OSHA penalty of $30,499 is above the Construction industry average of $6,767 per employer (4.5x the average). The employer has 3 inspections compared to the industry average of 2.0 per employer. For a direct comparison, Jose's Construction in Oklahoma City, OK is a similar construction employer with $30,507 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.