PlainWorker
Employers › MN

Manufacturing · Glenwood, MN

Clyde Machines INC

According to OSHA enforcement records (2010–2026), Clyde Machines INC ranks #10,103 of 99,447 penalized U.S. employers by total current penalty, with a concerning safety record: 12 violations across 3 inspections.

Top 10% by penalty83% serious
$30,945
OSHA penalties
12
Violations cited
3
OSHA inspections
#10,103
of 99,447 penalized employers

Clyde Machines INC in Glenwood, MN has been the subject of 3 OSHA workplace inspections and 12 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $30,945. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Clyde Machines INC 3 times over 5 years, roughly once every couple of years. These inspections resulted in 12 violations, averaging 4.0 per inspection, above what's typical for a single visit. According to OSHA enforcement records, its total current penalty ranks #10,103 of 99,447 penalized U.S. employers (the top 10% of penalized employers nationally). Of these, 10 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Superior Precision Sheet Metal CORP. in Colorado Springs, CO is another manufacturing employer with 2 OSHA inspections on record and $30,936 in current penalties.

4.0
violations per inspection
83.3%
of violations were serious
#10,103
of 99,447 penalized employers

Compliance score

F 32/100
  • F OSHA safety compliance: 12 violations across 3 OSHA inspections (4.0 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Clyde Machines INC compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Clyde Machines INC runs moderately above peers (2.0x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$30,945 Bottom 10% least affordable more affordable than 10% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). Below this entry. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Below this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Below this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Below this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). This entry sits in this band. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Clyde Machines INC.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.00.49.017.526.034.5OSHA inspectionsViolations citedHAVERHILL CHEMICALS …, OSHA inspections: 3 · Violations cited: 33DONGHEE ALABAMA, LLC, OSHA inspections: 3 · Violations cited: 6ALUMINUM SHAPES, LLC., OSHA inspections: 3 · Violations cited: 9AMERICAN FINE SINTER…, OSHA inspections: 3 · Violations cited: 14CHARMET NEVADA, OSHA inspections: 3 · Violations cited: 8PAVILION FURNITURE I…, OSHA inspections: 3 · Violations cited: 28HEARTHSIDE FOOD SOLU…, OSHA inspections: 3 · Violations cited: 5PELLET AMERICA CORPO…, OSHA inspections: 3 · Violations cited: 12EAST BAKING CO, OSHA inspections: 3 · Violations cited: 4AP GREEN REFRACTORIE…, OSHA inspections: 3 · Violations cited: 26AUSTIN AIR SYSTEMS L…, OSHA inspections: 3 · Violations cited: 13DIETZGEN CORPORATION, OSHA inspections: 3 · Violations cited: 18MCCAIN FOODS USA, INC., OSHA inspections: 3 · Violations cited: 11RAMAR FOODS INTERNAT…, OSHA inspections: 3 · Violations cited: 4ESSITY PROFESSIONAL …, OSHA inspections: 3 · Violations cited: 9ROCKY MOUNTAIN METAL…, OSHA inspections: 3 · Violations cited: 4AMERICAN FLUX & METAL, OSHA inspections: 3 · Violations cited: 18ENNIS, INC., OSHA inspections: 3 · Violations cited: 3PEPSICO BOTTLING GRO…, OSHA inspections: 3 · Violations cited: 2ZUMRUT MARBLE & GRAN…, OSHA inspections: 3 · Violations cited: 21Clyde Machines INC, OSHA inspections: 3 · Violations cited: 12
Clyde Machines INC has 3 OSHA inspections on record and 12 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Clyde Machines INC in the Manufacturing enforcement ledger

Manufacturing sector: Clyde Machines INC is the #5,015 heaviest OSHA penalty carrier of 35,243 employers with nonzero fines ($30,945).

How Clyde Machines INC Compares

Clyde Machines INC's 4.00 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately above peers (2.0x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2010-07-14

Last Inspection

2015-08-05

Inspection Span

5 yrs

Violations / Inspection

4.0

Avg Penalty / Inspection

$10,315

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 5 years, averaging 4.0 violations per visit. That's $10,315 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

10

Serious

83.3% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

2

Other-Than-Serious

16.7% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$31,050

Current Penalty Amount

$30,945

Penalty Reduction

0.3%

What this shows Penalties were reduced by $105 from the initial assessment of $31,050. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Clyde Machines INC compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Clyde Machines INC Industry Avg
Inspections 3 2.6
Violations 12 8.0
Total Penalty $30,945 $15,763
Avg Penalty per Inspection $10,315 $6,093
View all 44,645 employers in Manufacturing →

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Clyde Machines INC, both outside MN so the neighborhoods are not geographic containment.

Similar current OSHA penalty

Nearest same-sector employers by current assessed penalty ($30,945 here).

KBK Industries, LLC. $30,946 KS HP Pelzer Automotive Systems INC $30,950 MI J.R. Short Milling Company $30,938 IL Kugler Oil Company $30,938 NE

Similar OSHA inspection count

Same-sector employers with a comparable inspection history outside this state (3 inspections here).

Haverhill Chemicals LLC 3 insp. Haverhill, OH Donghee Alabama, LLC 3 insp. Auburn, AL Aluminum Shapes, LLC. 3 insp. Pennsauken, NJ American Fine Sinter CO., LTD. 3 insp. Tiffin, OH

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

KBK Industries, LLC.
Liberal, KS
3 inspections $30,946
HP Pelzer Automotive Systems INC
Sterling Heights, MI
4 inspections $30,950
J.R. Short Milling Company
Kankakee, IL
5 inspections $30,938
Kugler Oil Company
Culbertson, NE
2 inspections $30,938
Superior Precision Sheet Metal CORP.
Colorado Springs, CO
2 inspections $30,936

Compare Clyde Machines INC vs KBK Industries, LLC. side-by-side →

What to do with this record

Use Clyde Machines INC's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Clyde Machines INC against KBK Industries, LLC., a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Clyde Machines INC's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Clyde Machines INC safe to work at? ▼
Based on OSHA records, Clyde Machines INC's workplace safety record is concerning, with multiple serious compliance issues. The employer has 12 violations across 3 inspections, including 10 serious violations. Compared to Manufacturing industry peers, this is above average for penalties. Review the full inspection history below for details.
How many OSHA violations does Clyde Machines INC have? ▼
Clyde Machines INC has 12 OSHA violations on record, including 10 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $30,945.
How many OSHA inspections has Clyde Machines INC had? ▼
Clyde Machines INC has had 3 OSHA inspections, with the first recorded on 2010-07-14 and the most recent on 2015-08-05. This averages 4.0 violations per inspection.
What is the total penalty amount for Clyde Machines INC? ▼
Clyde Machines INC has been assessed $30,945 in current OSHA penalties, reduced from an initial assessment of $31,050 (a 0.3% reduction).
Does Clyde Machines INC have any serious or willful violations? ▼
Yes. Clyde Machines INC has 10 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Clyde Machines INC operate in? ▼
Clyde Machines INC operates in the Manufacturing sector (NAICS code 333924). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Clyde Machines INC rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Clyde Machines INC ranks #10,103 (the top 10% of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Clyde Machines INC's safety record compare to industry average? ▼
Clyde Machines INC's total OSHA penalty of $30,945 is above the Manufacturing industry average of $15,763 per employer (2.0x the average). The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Superior Precision Sheet Metal CORP. in Colorado Springs, CO is a similar manufacturing employer with $30,936 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.