Manufacturing · Clifton, TX

Clifton Moulding Corporation

According to OSHA enforcement records (2010–2026), Clifton Moulding Corporation ranks #31,690 of 99,447 penalized U.S. employers by total current penalty, with a mixed safety record: 4 violations across 3 inspections.

Upper half by penalty100% serious
$11,253
OSHA penalties
4
Violations cited
3
OSHA inspections
#31,690
of 99,447 penalized employers

Clifton Moulding Corporation in Clifton, TX has been the subject of 3 OSHA workplace inspections and 4 citations since 2010, according to enforcement records from the U.S. Department of Labor. Total penalties assessed: $11,253. All enforcement data below is sourced from the DOL public enforcement databases at data.dol.gov.

The record in one line

OSHA has inspected Clifton Moulding Corporation 3 times over 1 year - more than twice a year on average. These inspections resulted in 4 violations, averaging 1.3 per inspection. According to OSHA enforcement records, its total current penalty ranks #31,690 of 99,447 penalized U.S. employers (the upper half of penalized employers nationally). Of these, 4 were classified as serious - indicating hazards that could cause death or serious harm. Against the Manufacturing industry average of 3 inspections per employer, this sits roughly in line with peers (1.2x the sector average) on inspection frequency. For comparison, Majestic Valley Pellets, LLC in Alamosa, CO is another manufacturing employer with 2 OSHA inspections on record and $11,250 in current penalties.

1.3
violations per inspection
100.0%
of violations were serious
#31,690
of 99,447 penalized employers

Compliance score

C 71/100
  • C OSHA safety compliance: 4 violations across 3 OSHA inspections (1.3 per inspection), vs. national p10 0.0 (best) / p90 5.5 (worst) among 145,626 inspected employers.

Channels are separate federal datasets: a dimension marked not applicable simply has no record in that dataset for this employer, not a good or bad score.

Open my watchlist

How Clifton Moulding Corporation compares on OSHA penalties

Total current penalty vs the Manufacturing per-employer average

in penalties

What this shows Clifton Moulding Corporation runs moderately below peers (0.7x the sector average) in total OSHA penalties.

Source U.S. Department of Labor, OSHA enforcement extracts As of 2026

Where this penalty ranks nationally

Total current OSHA penalty vs every U.S. employer with a nonzero penalty

$11,253 Bottom 32% least affordable more affordable than 32% of 99,447 U.S. employers with a penalty

$0–$5,000: 43,959 U.S. employers with a penalty (44%). Below this entry. $5,000–$10,000: 20,304 U.S. employers with a penalty (20%). Below this entry. $10,000–$15,000: 11,027 U.S. employers with a penalty (11%). This entry sits in this band. $15,000–$20,000: 6,546 U.S. employers with a penalty (7%). Above this entry. $20,000–$25,000: 4,175 U.S. employers with a penalty (4%). Above this entry. $25,000–$30,000: 2,877 U.S. employers with a penalty (3%). Above this entry. $30,000–$35,000: 2,036 U.S. employers with a penalty (2%). Above this entry. $35,000–$40,000: 1,493 U.S. employers with a penalty (2%). Above this entry. $40,000–$45,000: 1,095 U.S. employers with a penalty (1%). Above this entry. $45,000–$50,000: 785 U.S. employers with a penalty (1%). Above this entry. $50,000–$55,000: 5,150 U.S. employers with a penalty (5%). Above this entry. This employer $0 $55,000 every penalized U.S. employer, bucketed by value

Each bar is a $5K-wide band; taller bars hold more U.S. employers with a penalty. The dashed line + filled bar mark this entry. Hover or tap any bar for its full count, share, and where it sits relative to this entry.

Source U.S. Department of Labor, OSHA enforcement extracts · 2026

Does more inspection scrutiny mean more findings?

Each dot is one of 21 Manufacturing employers with an OSHA inspection on record, placed by inspections and violations cited. The highlighted dot is Clifton Moulding Corporation.

Frequently inspected, many findingsRarely inspected, many findingsFrequently inspected, clean recordBelow median on both3.03.033.03.0014.729.444.058.7OSHA inspectionsViolations citedMARBLE BUILDER DIRECT INTERNATIONAL, INC., OSHA inspections: 3 · Violations cited: 55EAST BALT BAKERIES, OSHA inspections: 3 · Violations cited: 9CJ FOODS MANUFACTURING BEAUMONT CORP., OSHA inspections: 3 · Violations cited: 4TFO TECH CO., LTD, OSHA inspections: 3 · Violations cited: 22CARONE & COMPANY, INC., OSHA inspections: 3 · Violations cited: 4GREENCORE USA, INC., OSHA inspections: 3 · Violations cited: 21SAFETY STORAGE, INC., OSHA inspections: 3 · Violations cited: 8WYRMWOOD, INC., OSHA inspections: 3 · Violations cited: 10FIRST STRING SPACE, INC., OSHA inspections: 3 · Violations cited: 25GEM STATE PROCESSING, LLC, OSHA inspections: 3 · Violations cited: 6GREDE II LLC, OSHA inspections: 3 · Violations cited: 37B&H MILLWORK & FIXTURES, INC., OSHA inspections: 3 · Violations cited: 56JONES LUMBER GLOSTER, LLC, OSHA inspections: 3 · Violations cited: 8VANDIVER STEEL FABRICATION, INC., OSHA inspections: 3 · Violations cited: 28RD HENRY & COMPANY LLC, OSHA inspections: 3 · Violations cited: 8FLASH4.COM, LLC, OSHA inspections: 3 · Violations cited: 11SPRING CITY ELECTRICAL MANUFACTURING COMPANY, OSHA inspections: 3 · Violations cited: 5CONNECTICUT STONE SUPPLIES, OSHA inspections: 3 · Violations cited: 42HAMBURG FINISHING WORKS, INC., OSHA inspections: 3 · Violations cited: 6NORTHROP GRUMMAN SYSTEMS CORPORATION, OSHA inspections: 3 · Violations cited: 2Clifton Moulding Corporation, OSHA inspections: 3 · Violations cited: 4
Clifton Moulding Corporation has 3 OSHA inspections on record and 4 violations cited. The crosshair marks the median among these Manufacturing peers. Across this sector's tracked employers, more inspections is moderately associated with more violations found -- not a coincidence, but not a guarantee either.

Clifton Moulding Corporation in the Manufacturing enforcement ledger

In Manufacturing, Clifton Moulding Corporation sits at penalty rank #14,519 of 35,243 penalized establishments ($11,253 assessed).

How Clifton Moulding Corporation Compares

Clifton Moulding Corporation's 1.33 violations per inspection compares to the Manufacturing sector average of 8.0 violations per employer.

Against the Manufacturing industry average of $15,763 per employer, this employer's current OSHA penalty runs moderately below peers (0.7x the sector average).

Enforcement detail

OSHA Inspection History

Total Inspections

3

First Inspection

2018-05-03

Last Inspection

2018-11-19

Inspection Span

1 yr

Violations / Inspection

1.3

Avg Penalty / Inspection

$3,751

Industry Avg / Inspection

$6,093

What this shows 3 inspections over 1 year, averaging 1.3 violations per visit. That's $3,751 per inspection vs. the Manufacturing average of $6,093.

Enforcement detail

Violation Breakdown

4

Serious

100.0% of total

0

Willful

0.0% of total

0

Repeat

0.0% of total

0

Other-Than-Serious

0.0% of total

What this shows Serious violations involve hazards that could cause death or serious physical harm. Willful violations indicate intentional or knowing disregard of the law. Repeat violations are for hazards previously cited within the past 5 years.

Enforcement detail

Penalty Analysis

Initial Penalty Assessed

$20,695

Current Penalty Amount

$11,253

Penalty Reduction

45.6%

What this shows Penalties were reduced by $9,442 from the initial assessment of $20,695. Reductions may result from informal settlements, formal contests, or negotiated agreements with OSHA.

Industry Safety Context: Manufacturing

How Clifton Moulding Corporation compares to the Manufacturing sector, which has 44,645 employers tracked by PlainWorker.

Metric Clifton Moulding Corporation Industry Avg
Inspections 3 2.6
Violations 4 8.0
Total Penalty $11,253 $15,763
Avg Penalty per Inspection $3,751 $6,093

Nationwide Manufacturing peers with similar penalties or inspection counts

Two OSHA-record peer sets for Clifton Moulding Corporation, both outside TX so the neighborhoods are not geographic containment.

Nearby & Similar Employers in Manufacturing

Showing 5 of 44644 other employers tracked in this sector.

Compare Clifton Moulding Corporation vs Merge Manufacturing LLC side-by-side →

What to do with this record

Use Clifton Moulding Corporation's enforcement history as one data point, not the whole picture.

  • A single employer's record can look unusual in isolation. Compare Clifton Moulding Corporation against Merge Manufacturing LLC, a similarly-sized employer in the same sector, before drawing conclusions. Compare side-by-side
  • See whether Clifton Moulding Corporation's inspection and penalty record is typical for Manufacturing or an outlier against the sector's own average. View the Manufacturing sector
  • Before you accept a job or raise a safety concern, search any employer for its own OSHA inspection history the same way you found this one. Search employers

Figures reflect closed OSHA and WHD federal enforcement actions on record (2010–2026); not every workplace issue results in an inspection or investigation.

Frequently Asked Questions

Is Clifton Moulding Corporation safe to work at? ▼
Based on OSHA records, Clifton Moulding Corporation's workplace safety record is mixed, with some compliance concerns. The employer has 4 violations across 3 inspections, including 4 serious violations. Compared to Manufacturing industry peers, this is below average for penalties. Review the full inspection history below for details.
How many OSHA violations does Clifton Moulding Corporation have? ▼
Clifton Moulding Corporation has 4 OSHA violations on record, including 4 serious, 0 willful, and 0 repeat violations. The total current penalty amount is $11,253.
How many OSHA inspections has Clifton Moulding Corporation had? ▼
Clifton Moulding Corporation has had 3 OSHA inspections, with the first recorded on 2018-05-03 and the most recent on 2018-11-19. This averages 1.3 violations per inspection.
What is the total penalty amount for Clifton Moulding Corporation? ▼
Clifton Moulding Corporation has been assessed $11,253 in current OSHA penalties, reduced from an initial assessment of $20,695 (a 45.6% reduction).
Does Clifton Moulding Corporation have any serious or willful violations? ▼
Yes. Clifton Moulding Corporation has 4 serious violations. Serious violations involve hazards likely to cause death or serious physical harm. Willful violations indicate the employer intentionally or knowingly disregarded the law.
What industry does Clifton Moulding Corporation operate in? ▼
Clifton Moulding Corporation operates in the Manufacturing sector (NAICS code 321918). This industry has 44,645 employers tracked by PlainWorker, with 115,492 total OSHA inspections and $703.72M in cumulative penalties.
Where does Clifton Moulding Corporation rank nationally on OSHA penalties? ▼
Among the 99,447 U.S. employers with a nonzero current OSHA penalty in PlainWorker's corpus, Clifton Moulding Corporation ranks #31,690 (the upper half of penalized employers nationally). The ordinal is a live COUNT of employers with a lower total_current_penalty; see the methodology page for the exact derivation.
How does Clifton Moulding Corporation's safety record compare to industry average? ▼
Clifton Moulding Corporation's total OSHA penalty of $11,253 is below the Manufacturing industry average of $15,763 per employer. The employer has 3 inspections compared to the industry average of 2.6 per employer. For a direct comparison, Majestic Valley Pellets, LLC in Alamosa, CO is a similar manufacturing employer with $11,250 in current penalties.
Data Sources & Methodology ▼

Data as of 2026. Source: U.S. Department of Labor (OSHA, WHD).

Source: OSHA Enforcement Data

Inspection and violation records from the Occupational Safety and Health Administration (OSHA), U.S. Department of Labor, covering the period 2010–2026. Includes inspection dates, violation types (serious, willful, repeat, other-than-serious), and penalty amounts. Penalties shown are current assessed amounts and may differ from original citations due to settlement, contest, or reduction.

Source: Wage and Hour Division (WHD)

Compliance actions from the WHD, covering enforcement of the Fair Labor Standards Act (FLSA), including minimum wage, overtime, and child labor violations. Back wages represent amounts owed to affected employees as determined by WHD investigations.

Employer Matching

Employers are matched across OSHA and WHD datasets by name, state, and city. Employers included in PlainWorker have 2 or more OSHA inspections or $1,000+ in WHD back wages. Data is updated monthly from data.dol.gov.

Verify with OSHA establishment search →

Every figure on PlainWorker is rendered directly from official U.S. Department of Labor OSHA and Wage & Hour Division enforcement records, no number is typed in by an editor. This employer's ratios (penalty-per-violation, industry comparisons) are computed live from the 3 inspections on record. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026.